| 出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
| 2022-07 |
期刊論文
|
Online monitoring of the axial thermal displacement of machine tools using a laser mouse sensor |
Wen-Nan Cheng, Chih-Chun Cheng, Chih-Ming Tsai, Wei-Jen Chen, and Yu-Hsin Kuo |
Optical Engineering
|
| 2020-10 |
期刊論文
|
Feature selection for predicting tool wear of machine tools |
Wen-Nan Cheng, Chih-Chun Cheng, Yao-Hsuan Lei, Ping-Chun Tsai |
The International Journal of Advanced Manufacturing Technology volume
|
| 2020-10 |
研討會論文
|
On-line linear guideway monitoring using laser mouse sensor |
W N Cheng, C C Cheng, C M Tsai, B C Chang, W R Chen and T F Chiang |
|
| 2020-07 |
期刊論文
|
Design of a 5 degree of freedom–voice coil motor actuator forsmartphone camera modules |
Chang-Lin Hsieh, Chien-Sheng Liu, Chih-Chun Cheng |
Sensors and Actuators A: Physical
|
| 2020-05 |
期刊論文
|
On-line linear guideway monitoring using laser mouse sensor |
W. N. Cheng, C. C. Cheng*, C M Tsai, B C Chang, W R Chen and T F Chiang |
IOP Conf. Ser.: Mater. Sci. Eng. 1009 012012
|
| 2020-02 |
期刊論文
|
Sensor placement methodology for spindle thermal compensation of machine tools |
Ping-Chun Tsai, Chih-Chun Cheng, Wei-Jen Chen, Shao-Jung Su |
The International Journal of Advanced Manufacturing Technology
|
| 2019-09 |
研討會論文
|
Hollow Structure Designs Using Topology Optimization |
Y.H. Kuo, C.C. Cheng |
|
| 2019-07 |
期刊論文
|
Novel dynamic modeling of feed drive system using subspace method |
C.C. Liu, M.S. Tsai, C.C. Cheng |
Journal of the Chinese Institute of Engineers
|
| 2019-04 |
期刊論文
|
Development of a novel transmission engaging model for characterizing the friction behavior of a feed drive system |
C.C. Liu, M.S. Tsai, C.C. Cheng |
Mechanism and Machine Theory
|
| 2019-02 |
期刊論文
|
Self-supporting structure design for additive manufacturing by using a logistic aggregate function |
Y. H. Kuo and C. C. Cheng* |
Structural and Multidisciplinary Optimization
|
| 2019-01 |
期刊論文
|
Identification and compensation of position-dependent geometric errors of rotary axes on five-axis machine tools by using a touch-trigger probe and three spheres |
Y. T. Chen, P. More, C. S. Liu and C. C. Cheng |
The International Journal of Advanced Manufacturing Technology
|
| 2019- |
期刊論文
|
工具機主軸熱變位誤差補償技術 |
鄭志鈞、蔡秉均、陳韋任、王信鈊、蘇紹榕 |
機械新刊
|
| 2018-11 |
期刊論文
|
Design and characterisation of a fast steering mirror compensation system based on double porro prisms by a screw-ray tracing method |
Y. H. Chang, C. S. Liu* and C. C. Cheng |
Sensors
|
| 2018-06 |
研討會論文
|
Sensor-embedded Linear Ball Bearing for Linear Guide Way Preload and Straightness Monitoring |
Chih Chun Cheng, Wen-Nan Cheng, Mun-Jane Liao and Cheng-Kuo Sung |
|
| 2017-11 |
期刊論文
|
A Novel method based on operational modal analysis for monitoring the preload degradation of linear guideways in machine tools |
P.C. Tsai, C.C. Cheng*, Y.C. Cheng |
Mechanical Engineering Journal, JSME, DOI:10.1299/mej.16-00480.
|
| 2017-10 |
期刊論文
|
智慧製造現況與發展趨勢 |
蔡孟勳、鄭志鈞、高永洲、曾翔駿、黃智偉 |
技術通報
|
| 2017-08 |
期刊論文
|
On-line Ball Screw Preload Degradation Monitoring Based on Vibration Signals |
P.C. Tsai, C.C. Cheng*, Y.C. Hwang |
Journal of the Chinese Society of Mechanical Engineers
|
| 2017-08 |
研討會論文
|
Optimal external support structure design in additive manufacturing |
Y.H. Kuo, C.C. Cheng |
|
| 2017-05 |
期刊論文
|
Support structure design in additive manufacturing based on topology optimization |
Y. H. Kuo, C. C. Cheng*, Y. S. Lin and C.H. San |
Structural and Multidisciplinary Optimization
|
| 2017- |
期刊論文
|
工具機數位設計製造與智慧控制技術 |
蔡孟勳、姚宏宗、鄭志鈞、黃泓緯、唐溥陽、曾翔駿、劉景銘 |
機械新刊
|
| 2017- |
期刊論文
|
進給系統線性滑軌之滑塊預壓偵測技術 |
鄭尹俊、程文男、蔡秉均、鄭志鈞 |
機械新刊
|
| 2016-09 |
期刊論文
|
拓樸最佳化在積層製造上的應用 |
三政鴻、鄭志鈞、郭育昕 |
工業材料
|
| 2016-08 |
研討會論文
|
Preload Monitoring For Linear Guide Ways in Machine Tools |
Tsai, C. C. Cheng, Y. C. Cheng and C. K. Sung |
|
| 2015-01 |
期刊論文
|
工具機最佳切削轉速估測之研究 |
閻自發、程文男、鄭錫勳、鄭志鈞 |
機械月刊
|
| 2014-12 |
研討會論文
|
具預壓之滾珠螺桿其振動特性之分析
|
鄭志鈞, 許夫瀚 |
|
| 2014-12 |
研討會論文
|
工具機工件銑削品質預估技術之研發
|
鄭志鈞, 陳傑 |
|
| 2014-12 |
研討會論文
|
應用平衡器抑制旋轉主軸偏心振動技術之研發 |
鄭志鈞, 張崇訓 |
|
| 2014-10 |
期刊論文
|
Ball Screw Preload Loss Detection Using Ball Pass Frequency |
P. C. Tsai, C. C. Cheng* and Y. C.Hwang |
Mechanical Systems and Signal Processing
|
| 2014-10 |
研討會論文
|
Detection of Ball Screw Preload Loss Using Vibration at Ball Pass Frequency |
P. C. Tsai, C. C. Cheng, Y. C. Hwang |
|
| 2014-10 |
研討會論文
|
Negative-stiffness-mechanism Design Using Topology Optimization |
Y. H. Kuo, C. C. Cheng |
|
| 2014-03 |
期刊論文
|
Vibration Analysis of Beams with Multi-layers of Corrugations |
W. N. Cheng and C. C. Cheng* |
International Journal of Mechanical Sciences
|
| 2013-08 |
期刊論文
|
滾珠螺桿進給系統預壓偵測技術之研發 |
蔡秉均, 鄭志鈞, 黃逸群 |
工具機與零組件雜誌
|
| 2013-03 |
期刊論文
|
Structural design for desired eigenfrequencies and mode shapes using topology optimization |
T. D. Tsai and C. C. Cheng* |
Structural and Multidisciplinary Optimization
|
| 2012-09 |
期刊論文
|
進給系統之傳動元件技術 |
蕭府岳, 鄭志鈞 |
機械月刊
|
| 2012-07 |
研討會論文
|
A modified IEM approach to the dynamic problem of cracked plates |
C. C. Cheng, D. S. Liu, K. L. Cheng, W. N. Cheng |
|
| 2012-03 |
研討會論文
|
Topology Optimization of Flywheel Rotors Using SIMP Method: A Preliminary Study |
C. C. Cheng, T. D. Tsai |
|
| 2012- |
期刊論文
|
Topology Optimization of Flywheel Rotors Using SIMP: A Preliminary Study |
T. D. Tsai and C. C. Cheng* |
Advanced Materials Research
|
| 2011-12 |
研討會論文
|
應用密度函數法於飛輪轉子拓樸設計之研究 |
鄭志鈞, 蔡紓萍, 蔡騰德 |
|
| 2011-12 |
研討會論文
|
磨齒機旋轉吸振器外型設計 |
鄭志鈞, 郭峻銘 |
|
| 2011-12 |
研討會論文
|
電磁感應負剛性系統之研發 |
鄭志鈞, 黃世豪 |
|
| 2011-10 |
期刊論文
|
A New Design Strategy for Minimizing Sound Radiation of Vibrating Beam Using Dimples |
W. N. Cheng and C. C. Cheng* |
Journal of Vibration and Acoustics, ASME
|
| 2011-03 |
期刊論文
|
Vibration Analysis of Rail Grinding Using a Twin-Wheel Grinder |
C. C. Cheng*, C. P. Kuo, F. C. Wang and W. N. Cheng |
Journal of Sound and Vibration
|
| 2010-11 |
研討會論文
|
Development of Cutting Chatter Detection System |
C. C. Cheng, B. C. Tsai |
|
| 2010-10 |
期刊論文
|
Design and Analysis of Packaging Boxes for Flat Panel Display |
F. C. Teng, F. T. Wu, C. C. Cheng* and C. K. Sung |
IEEE Transactions on Advanced Packaging
|
| 2010-07 |
研討會論文
|
Innovative Weak Radiator Design Using Dimples |
C. C. Cheng, W. N. Cheng |
|
| 2010-05 |
期刊論文
|
Accurate Simulations of Reflective Wavelength Spectrum of Surface-Bonded FBG |
W. Y. Li, C. C. Cheng* and Y. L. Lo, |
Applied Optics
|
| 2010-04 |
期刊論文
|
研磨顫振抑制機構之設計、模擬與分析 |
王福清, 程文男, 鄭志鈞 |
機械月刊
|
| 2009-11 |
研討會論文
|
Applications of Beamforming on Acoustic Holography |
C. C. Cheng, C. F. Lin |
|
| 2009-11 |
研討會論文
|
Applications of Topology Optimization on Weak Radiator Design |
C. C. Cheng, Y. C. Shiu |
|
| 2009-11 |
研討會論文
|
Investigations of Correlation between Gear Transmission Error and Gear Vibration |
C. C. Cheng, W. H. Yang |
|
| 2009-11 |
研討會論文
|
Vibration analysis of rail grinding with double grinding wheels |
C. C. Cheng, F.C. Wang, W.N. Cheng |
|
| 2009-10 |
期刊論文
|
Moving Follower Rest Design Using Vibration Absorbers for Ball Screw Grinding |
C. C. Cheng*, C. P. Kuo, F. C. Wang and W. N. Cheng |
Journal of Sound and Vibration
|
| 2009-02 |
期刊論文
|
Investigation of Strain Transmission of Surface-Bonded FBGs Used as Strain Sensors |
W. Y. Li, C. C. Cheng* and Y. L. Lo |
Sensors and Actuators A:
|
| 2009-01 |
期刊論文
|
Reduction of flow-induced vibration and noise of an optical disk drive |
C.C. Cheng*, F.T. Wu, K.L. Ho |
Journal of Sound and Vibration
|
| 2008-11 |
研討會論文
|
Development of Vibration Diagnostic System for Gearbox |
C. C. Cheng, W. S. Lin |
|
| 2008-11 |
研討會論文
|
Vibration Analysis of Twin Screw Compressor |
C. C. Cheng, C. C. Chiu |
|
| 2008-11 |
研討會論文
|
防撞結構拓樸最佳化設計技術之研發 |
C. C. Cheng, F. C. Deng |
|
| 2008-08 |
期刊論文
|
Dynamic Beam Modification Using Dimples |
W. N. Cheng, C. C. Cheng* and G. H. Koopmann |
Journal of Vibration and Acoustics, ASME
|
| 2008-07 |
研討會論文
|
Follower Rest Design Using Vibration Absorbers for Ball Screw Grinding |
C. C. Cheng, F. C. Wang, W. N. Cheng |
|
| 2008-05 |
研討會論文
|
Weak Radiator Design Using Dimples |
W. N. Cheng, C. C. Cheng, G. H. Koopmann |
|
| 2008-02 |
期刊論文
|
Acoustic Response Synthesis Using Multiple PZT Patches |
C. C. Cheng* and C. C. Lin |
Journal of Vibration and Acoustics, ASME
|
| 2008-02 |
期刊論文
|
Design and Analysis of Shock Absorbing Structure for Flat Panel Display |
C. C. Cheng*, T. D. Tsai, D. W. Lin and C. C. Chiu |
IEEE Transactions on Advanced Packaging
|
| 2008-01 |
期刊論文
|
Design and Analysis of Auto-Balancer of an Optical Disk Drive Using Speed-Dependent Vibration Absorbers |
C. C. Cheng*, F. T. Wu, K. S. Hsu and K. L. Ho |
Journal of Sound and Vibration
|
| 2007-11 |
研討會論文
|
Development of Fiber Grating Measurement System |
C. C. Cheng, K. S. Yu |
|
| 2007-11 |
研討會論文
|
Development of Sound Field Measuring System |
C. C. Cheng, M. H. Tsai |
|
| 2007-08 |
期刊論文
|
Estimations of Fiber Bragg Grating Parameters and Strain Gauge Factor Using Optical Spectrum and Strain Distribution Information |
C. C. Cheng*, Y. L. Lo, W. Y. Li, C. T. Kuo and H. C. Cheng |
Applied Optics
|
| 2007-07 |
研討會論文
|
Dynamic Structure Modification Using Dents |
C. C. Cheng, W. N. Cheng |
|
| 2006-12 |
研討會論文
|
Applications of Impedance Method on Syntheses of Structure with slots |
C. C. Cheng, W. N. Cheng |
|
| 2006-07 |
研討會論文
|
Design and Analysis of Auto-balancer of an Optical Disk Drive Using Rotational Vibration Absorbers |
C. C. Cheng, F. T. Wu, K. L. Ho, K. S. Shiu |
|
| 2006-02 |
期刊論文
|
Design and Analysis of a Speed-Dependent Torsional Vibration Absorber |
F. T. Wu and C. C. Cheng* |
IMechE, Part D: Journal of Automobile Engineering
|
| 2006-02 |
期刊論文
|
Design of Vibration Absorbers Used in Multiple Tonal Excitations |
P. W. Wang, C. C. Cheng* |
Journal of Vibration and Acoustics, ASME
|
| 2006- |
研討會論文
|
Applications of Topology Optimization on LCD Crashworthiness Design |
C. C. Cheng , T. D. Tasi, D.W. Lin |
|
| 2006- |
研討會論文
|
Dynamic Analysis and Simulation of Twin Screw Compressor |
C. C. Cheng, W. T. Chern |
|
| 2005-11 |
期刊論文
|
An Impedance Modeling Technique For a Fluid-loaded Structure |
C. C. Cheng* |
AIAA Journal
|
| 2005-11 |
期刊論文
|
An Investigation of Bonding Layer Characteristics of a Substrate-Bonded Fiber Bragg Grating |
C. C. Cheng*, Y. L. Lo, B. S. Pun, E. M. Chang and W. Y. Li |
IEEE/OSA Journal of Lightwave Technology
|
| 2005-06 |
期刊論文
|
An Impedance Approach for Determining Optimal Locations and Shapes of Multiple Induced Strain Actuators |
C. C. Cheng* |
Smart Materials and Structures
|
| 2005-04 |
期刊論文
|
Natural Frequency Tuning Using Structural Patches |
P. W. Wang and C. C. Cheng* |
ASME, Joural of Vibration and Acoustics
|
| 2005-04 |
研討會論文
|
An Impedance Modeling Technique of a Fluid-Loaded Structure |
C. C. Cheng, P. W. Wang |
|
| 2005-01 |
期刊論文
|
An impedance approach for vibration response synthesis using multiple PZT actuators |
C.C. Cheng*, C.C. Lin |
Sensors and Actuators: Physical A
|
| 2005-01 |
研討會論文
|
應用拓樸最佳化法於三維動態結構之設計 |
C. C. Cheng, C. C. Ho and P. S Wu |
|
| 2004-12 |
期刊論文
|
Development of the methodology to improve automotive door closing sound |
C.C.Cheng*, F.T.Wu, K.W.Yang, F.Y.Lin, K.L.Pan and Y.Y.Chen |
Proc. IMechE. Vol. 219 Part D: Journal of Automobile Engineering
|
| 2004-08 |
期刊論文
|
Vibration analysis of a high-speed spindle under the action of a moving mass |
U.C. Gu, C.C. Cheng* |
Journal of Sound and Vibration
|
| 2004-03 |
期刊論文
|
工具機結構輕量化技術 |
何智強, 蔡騰德, 鄭志鈞 |
機械工業
|
| 2004-02 |
期刊論文
|
Thermal Compensation for a Chirp Fiber Bragg Grating Bonded Substrate |
Y.M.Chang, C.C.Cheng* and Y.L.Lo |
IEEE TRANSACTIONS ON ADVANCED PACKAGING
|
| 2003-05 |
期刊論文
|
Free vibration analysis of a resilient impact damper |
C. C. Cheng* and J. Y. Yang |
International Journal of Mechanical Science
|
| 2003-05 |
期刊論文
|
Modelling a rotating shaft subjected to a high-speed Moving Force |
C.C. Cheng*, J.K. Lin |
Journal of Sound and Vibration
|
| 2003- |
期刊論文
|
高速光碟機振動與噪音抑制之研究 |
吳豐泰, 鄭志鈞 |
中華民國機構與機器原理學會會刊
|
| 2002-07 |
期刊論文
|
Topology and Shape Optimizations of Substrates for Chirp Fiber Bragg Grating Spectrum Tuning |
K. W. Yang, A. G. Liu, C.C. Cheng*, and Y.-L. Lo |
IEEE/OSA JOURNAL OF LIGHTWAVE TECHNOLOGY
|
| 2002-03 |
期刊論文
|
結構輕量化設計 |
陳建昌, 姜冠禎, 鄭志鈞 |
機械月刊
|
| 2001-06 |
期刊論文
|
A NOTE ON THE VIBRO-ACOUSTIC RESPONSE OF A PERIODICALLY SUPPORTED BEAM SUBJECTED TO A TRAVELLING, TIME-HARMONIC LOADING |
C.C. CHENG*, C.P. KUO AND J.W. YANG |
Journal of Sound and Vibration
|
| 2001-06 |
期刊論文
|
TRANSIENT VIBRATION ANALYSIS OF A HIGH-SPEED FEED DRIVE SYSTEM |
C.C.Cheng* and J.S.Shiu |
Journal of Sound and Vibration
|
| 2001-05 |
期刊論文
|
A NOTE ON THE VIBRO-ACOUSTIC RESPONSE TO A TRAVELLING, TIME-HARMONIC LOADING |
C. C. Cheng*, C. P. Kuo, J. W. Yang |
Journal of Sound and Vibration
|
| 2001-04 |
期刊論文
|
Applications of the impedance Method on Multiple Piezoelectric Actuators Driven Structures |
C. C. Cheng*, P. W. Wang |
ASME, Journal of Vibration and Acoustics
|
| 2000-07 |
期刊論文
|
Wavenumber-Harmonic Analysis of a Periodically Supported Beam Under the Action of a Convected Loading |
C. C. Cheng*, C,. P. Kuo and J. W. Yang |
ASME, Journal of Vibration and Acoustics
|
| 1999-05 |
期刊論文
|
SOUND RADIATION FROM PERIODICALLY SPRING-SUPPORTED BEAMS UNDER THE ACTION OF A CONVECTED UNIFORM HARMONIC LOADING |
C. C. Cheng*, C. M. Chiu |
Journal of Sound and Vibration
|
| 1999-05 |
期刊論文
|
擁有加強樑平板之聲壓輻射分析 |
鄭志鈞, 楊宗仁 |
中國造船暨輪機工程學刊機械月刊
|
| 1998-05 |
期刊論文
|
Structural Acoustic Response Reduction of a Fluid Loaded Beam Using Unequally-spaced Concentrated Masses |
C. C. Cheng*, J. K. Wang |
Applied Acoustics
|
| 1995-06 |
期刊論文
|
Vibration Reduction of a Mass-loaded Beam |
R. F. Keltie and C. C. Cheng* |
Journal of Sound and Vibration
|
著作授權