研究人才詳細資料
主要學歷
| 出版年月 | 著作類別 | 著作名稱 | 作者 | 收錄出處 |
|---|---|---|---|---|
| 2022-10 | 期刊論文 | A Novel Asymmetric Face Gear Cut by Duplex Face-Milling With Multiple Auxiliary Flank Modification Motions | Yi-Hui Lee, Kuan-Hung Chen, and Zhang-Hua Fong | Journal of Manufacturing Science and Engineering, Transactions of the ASME |
| 2021-05 | 期刊論文 | Tooth Flank Modification of a Helical Gear by Using Modified Tangential Dressing Motion in a Gear Generating Grinding Machine | Gwan-Hon Chen, Zhang-Hua Fong |
中國機械工程學刊 Journal of the Chinese Society of Mechanical Engineers |
| 2020-11 | 期刊論文 | Study on Building Digital-Twin of Face-Milled Hypoid Gear from Measured Tooth Surface Topographical Data | Yi-Hui Lee, Zhang-Hua Fong | Journal of Mechanical Design, ASME |
| 2020-05 | 期刊論文 | A Mathematical Model for Grinding a Stick Blade Profile to Cut Hypoid Gear | Yi-Hui Lee, Zhang-Hua Fong | Journal of Mechanical Design, ASME |
| 2020-04 | 期刊論文 | Mathematical Model of a Vertical Six-Axis Cartesian CNC Machine for Producing Face Milled and Face Hobbed Bevel Gears | Ruei-Hung Hsu, Yi-Pei Shih, Zhang-Hua Fong, Chin-Lung Huang, Szu-Hung Chen, Shih-Sheng Chen, Yi-Hui Lee, Kuan-Hung Chen, Tzu-Ping Hsu, Wei-Jen Chen | Journal of Mechanical Design, ASME |
| 2018-11 | 研討會論文 | 強力刮齒製程之電腦數值模擬 | 陳冠宏,古尚倫,馮展華 | |
| 2018-11 | 研討會論文 | 戟齒輪切削刀具研磨方法之研究 | 陳威仁、李羿慧、馮展華 | |
| 2018-10 | 研討會論文 | 五軸齒輪加工機傾斜型作台的幾何精度量測研究 | 陳冠宏、程冠傑、馮展華 | |
| 2016-06 | 期刊論文 | Gear Flank Modification Using a Variable Lead Grinding Worm Method on a CNC Gear Grinding Machine | Zhang-Hua Fong,Gwan-Hon Chen | Journal of Mechanical Design, Transactions of the ASME |
| 2015-11 | 研討會論文 | 戟齒輪切削刀具磨刀機之數學模式 | 李羿慧、謝東翰、馮展華 | |
| 2015-09 | 期刊論文 | A novel tilt form grinding method for the rotor of dry vacuum pump | Zheng-Xiang Zhang, Zhang-Hua Fong | Mechanism and Machine Theory |
| 2015-02 | 期刊論文 | Numerical tooth contact analysis of a bevel gear set by using measured tooth geometry data | Chen-Hsiang Lin, Zhang-Hua Fong | Mechanism and Machine Theory |
| 2015-02 | 期刊論文 | Study on the cutting time of the hypoid gear tooth flank | Szu-Hung Chen, Zhang-Hua Fong | Mechanism and Machine Theory |
| 2013-12 | 研討會論文 | 戟齒輪設計與切齒節錐計算方法之研究 | 馮展華、徐子評、潘偉民、李羿慧 | |
| 2013-11 | 研討會論文 | 戟齒輪加工機切削模擬方法之研究 | 馮展華、郭哲甫、陳思宏、李羿慧 | |
| 2012-04 | 期刊論文 | A Study of the Contact Stress Analysis of Cylindrical Gears using the Hybrid Finite Element Method | Z.X. Zhang, Zhang-Hua Fong, Y.H. Li and H.S. Fang, | Journal of Mechanical Engineering Science |
| 2011-08 | 期刊論文 | Novel Variable–Tooth –Thick –ness Hob for Longitudinal Crowning in the Gear-Hobbing Process | 55. Ruei-Hung Hsu, and Zhang-Hua Fong | Mechanism and Machine Theory |
| 2011-04 | 期刊論文 | Modify Roll Profile Correction for the Gear Shaping Cutter Made by the Lengthwise-Reciprocating Grinding Process | Huang CL, Fong ZH | JOURNAL OF MECHANICAL DESIGN |
| 2011-04 | 期刊論文 | Serration Design Guidance for Gear Plunge Shaving Cutter | Hsu RH, Fong ZH | JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME |
| 2011-04 | 期刊論文 | Undercutting and contact characteristics of longitudinal cycloidal spur gears generated by the dual face-hobbing method | Wang WS, Fong ZH | MECHANISM AND MACHINE THEORY |
| 2010-11 | 期刊論文 | Design of form milling cutters with multiple inserts for screw rotors | Chiang CJ, Fong ZH | MECHANISM AND MACHINE THEORY |
| 2010-05 | 期刊論文 | Tooth contact Analysis of Longitudinal cycloidal_crowned Helical Gears With Circular Arc Teeth | 48. Wei-Shiang Wang., and Z.H. Fong | ASME J. Mech. Des., |
| 2010-02 | 期刊論文 | Simulation of a Cylindrical Form Grinding Process by the Radial- Ray Shooting (RRS) Method | Wu Y.-R., Fong Z.-H., and Zheng-Xiang Zhang. | Mech. Mach. Theory |
| 2010--- | 期刊論文 | Analysis of auxiliary crowning in parallel gear shaving | Ruei-Hung Hsu., and Z.H. Fong | Mech. Mach. Theory |
| 2010--- | 期刊論文 | Even Contact Design for the Plunge Shaving Cutter | Ruei-Hung Hsu,Z.H. Fong | Mech. Mach. Theory |
| 2009-11 | 研討會論文 | 應用數值解法(RRS)於圓柱型成形磨齒加工之模擬 | 吳育仁、馮展華、張政翔、林怡廷、鄭名富 | |
| 2009-11 | 研討會論文 | 數控滾齒機滾齒製程之電腦數值模擬 | 陳冠宏、陳重儒、馮展華 | |
| 2009-05 | 期刊論文 | Computerized gear cutting simulation using a psuedo-planar method | Chiang CJ, Fong ZH, Chang KL | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE |
| 2009-05 | 期刊論文 | Novel Third-Order Correction for a Helical Gear Shaping Cutter Made by a Lengthwise-Reciprocating Grinding Process | Huang, C -L. Fong, Z-H | Journal of Mechanical Design, ASME |
| 2009--- | 期刊論文 | Optimization design of an explicitly defined rack for the generation of rotors for twin-screw compressors | Yu-Ren Wu, Zhang-Hua Fong* | Mechanism and Machine Theory |
| 2009--- | 期刊論文 | Undercutting and Interference for Thread Form Grinding with a Tilt Angle | Chiang, C -J. and Fong, Z-H., | Mech. Mach. Theory |
| 2008-06 | 期刊論文 | Flank Correction for Spiral Bevel and Hypoid Gears on a Six-Axis CNC Hypoid Gear Generator | Shih, Y-P., and Fong, Z-H* | Journal of Mechanical Design, ASME |
| 2008-04 | 期刊論文 | Roter Profile Design for the Twin-Screw Compressor Based on the Normal-Rack Generation Method | Wu, Y.-R., and Fong, Z-H | Journal of Mechanical Design |
| 2008--- | 期刊論文 | A dual face-hobbing method for the cycloidal crowning of spur gears | Wei-Shiang Wang, Zhang-Hua Fong* | Mechanism and Machine Theory |
| 2008--- | 期刊論文 | Computerized simulation of thread form grinding process | C.J. Chiang,Z.H. Fong*,J.T. Tseng | Mechanism and Machine Theory |
| 2008--- | 期刊論文 | Improved Rotor Profiling Based on the Arbitrary Sealing Line for Twin Screw Compressors | Wu, Y.-R., and Fong, Z-H | Mechanism and Machine Theory |
| 2008--- | 期刊論文 | Profile correction of a helical gear shaping cutter using the lengthwise-reciprocating grinding method | Chin-Lung Huang,Zhang-Hua Fong*,Shi-Duang Chen,Kuang-Rong Chang | Mechanism and Machine Theory |
| 2008--- | 期刊論文 | Study on the tooth profile for the screw claw-type pump | Chiu-Fan Hsieh*,Yii-Wen Hwang,Zhang-Hua Fong | Mechanism and Machine Theory |
| 2007-12 | 期刊論文 | Flank Modification Methodology for Face-Hobbing Hypoid Gears Based on Ease-Off Topography | Yi-Pei Shih, Zhang-Hua Fong | Journal of Mechanical Design, ASME |
| 2007-02 | 專書論文 | 圓柱齒輪成形切削數值模擬方法 | 江啟榮、馮展華、方宏聲 | |
| 2007-02 | 專書論文 | 螺旋式壓縮機電腦輔助設計及系統整合 | 吳育仁、馮展華 | |
| 2007-01 | 期刊論文 | Mathematical Model for a Universal Face Hobbing Hypoid Gear Generator | Yi-Pei Shih, Zhang-Hua Fong | Journal of Mechanical Design, ASME |
| 2007--- | 期刊論文 | Novel Profile Modification Methodology for Molded Face-Gear Drives | Tsay, M-F. and Fong, Z-H., | Proceedings of the I MECH E Part C Journal of Mechanical Engineering Science |
| 2006-11 | 研討會論文 | 圓柱齒輪成形切削模擬之研究 | 江啟榮、馮展華、張凱倫 | |
| 2006-11 | 研討會論文 | 基於齒直角齒條創成法(NRGM)之雙螺桿轉子及加工刀具 | 吳育仁、馮展華、顏立永 | |
| 2006-10 | 專書論文 | 面滾式戟齒輪創成機器之數學模式研究Ⅱ | 馮展華、石伊蓓 | |
| 2006-05 | 期刊論文 | Forth Order Kinematic Synthesis for Face-Milling Spiral Bevel Gears with Modified Radial Motion (MRM) Correction | Pei-Yu Wang, Zhang-Hua Fong | Journal of Mechanical Design,Trans of ASME |
| 2006--- | 期刊論文 | Evaluating the interlobe clearance and determining | 馮展華,黃妃釧 | Part C: J. Mechanical Engineering Science |
| 2006--- | 期刊論文 | Theoretical and practical investigations regarding the | Z-H Fong,R-H Hsu | Part C: J. Mechanical Engineering Science |
| 2006--- | 期刊論文 | Topographic Error Analysis of Gear Plunge-Shaving Cutter Finished by Cone Grinding Wheel | Zhang-Hua Fong, R.H. Hsu | Journal of the Chinese institute of Engineers,Transactions of the Chinese Institute of Engineers |
| 2005-12 | 研討會論文 | 多牙口滾刀刃口線數學模式建立與加工齒輪的齒型誤差分析 | 陳冠宏、馮展華、謝仁桂 | |
| 2005-01 | 研討會論文 | 齒條創成雙螺桿壓縮機轉子線形之研究 | 吳育仁、馮展華、賴欣池 | |
| 2005--- | 期刊論文 | Adjustability Improvement of Face-Milling Spiral Bevel Gears by Modified Radial Motion (MRM) Method | Pei-Yu Wang, ,Zhang-Hua Fong | Mechanism and Machine Theory |
| 2005--- | 期刊論文 | Mathematical Model of Face-Milling Spiral Bevel Gears with Modified Radial Motion (MRM) Correction | 馮展華,王培郁 | Mathematical and Computer Modelling |
| 2005--- | 期刊論文 | Study on the Generalized Mathematical Model of Non-Circular Gears | Ming-Feng Tsay, Zhang-Hua Fong | Mathematical and Computer Modelling |
| 2003-12 | 研討會論文 | Mathematical Transformation Universal Hypoid Generator to Six-Axis CNC Hypoid Generator | 王培郁、馮展華 | |
| 2003-12 | 研討會論文 | 擺線減速器齒廓之研究 | 謝秋帆、馮展華 | |
| 2003-06 | 研討會論文 | 創意設計與專利迴避-以自行車碟式煞車為例 | 馮展華、丁弘光 | |
| 2002-12 | 研討會論文 | 自行車機械矽碟式煞車之設計方法研究(part 1) | 廖書賢、王培郁、馮展華 | |
| 2002-12 | 研討會論文 | 自行車機械矽碟式煞車之設計方法研究(part 2) | 廖書賢、丁弘光、馮展華 | |
| 2002-12 | 研討會論文 | 螺旋爪式壓縮機齒輪之研究 | 馮展華、謝秋帆 | |
| 2002-11 | 研討會論文 | NGW型行星齒輪系裝配誤差對背隙之影響[凸輪及齒輪傳動機構] | 吳育仁、歐冠吟、陳冠宏、馮展華 | |
| 2002-09 | 期刊論文 | Mathematical Model for Parametric Tooth Profile of Spur Gear Using Line of Action | Zhang-Hua Fong, Ta-Wei Chiang, and Chieh-Wen Tsay | Mathematical andComputer Modeling |
| 2002-08 | 專書 | 自行車碟式煞車系統之研發 | 馮展華 | 中華民國機構與機器原理學會會刊 |
| 2002--- | 期刊論文 | Design Constraints of Five-Arc Root’s Vacuum Pump | Pei-Yu Wang, Zhang-Hua Fong,H.S. Fang | Journal of Mechanical Science |
| 2002--- | 期刊論文 | Mathematical Model of Curvature Analysis for Conjugate Surfaces with Generalized Motion in Three Dimensions | Jeng-Kang Lee, Chao-Kuang Chen, Zhang-Hua Fong | Journal of Mechanical Engineering Science |
| 2002--- | 期刊論文 | The Effects of Adding Molybdenum Dithiocarbamate Additive to a Sulfur-Phosphorus Gear Oil on Two Roller Apparatus Performance | 26. Jeng, Y-R, Hwang, S-J, Fong, Z-H, Shieh, J-A | Lubrication Engineering |
| 2001-06 | 專書論文 | 六軸電腦數值控制戟齒輪創成機器之數學模式研究 | 馮展華 | |
| 2001--- | 期刊論文 | Computer-aided manufacturing of spiral bevel and hypoid gears by a applying optimization techniques | Chung-Yunn Lin, Chung-Biau Tsay, Zhang-Hua Fong | Materials Processing Technology |
| 2001--- | 期刊論文 | Evaluating the Inter-lobe Clearance of Twin-Screw Compressor by the Iso-Clearance Contour Diagram (ICCD) | Zhang-Hua Fong, F.C. Huang, and H.S. Fang | Mechanism and Machine Theory |
| 2000-03 | 期刊論文 | Mathematical Model of Universal Hypoid Generator With Supplemental Kinematic Flank Correction Motions | Zhang-Hua Fong | Journal of Mechanical Design, Transactions of the ASME |
| 2000--- | 期刊論文 | Study on the undercutting of internal cycloidal gear with small tooth difference | Fong. Zhang-Hua, Tsay. Chieh-Wen | Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Eng |
| 200 -11 | 研討會論文 | 壓縮機效率改善之研究 | 吳召信、王培郁、馮展華 | |
| 1998--- | 期刊論文 | An experimental approach characterizing rear bicycle derailleur systems Part II: The stability region and its applications | Lin. T.Y., Tseng. C.H., Fong. Z.H. | International Journal of Vehicle Design |
| 1998--- | 期刊論文 | Computer-Aided Manufacturing of Spiral Bevel and Hypoid Gears with Minimum Surface Deviation | Chung-Yunn Lin., C.-B.T., and Zhang-Hua Fong., | Mechanism and Machine Theory |
| 1997--- | 期刊論文 | Design opyimization and applications in bicycle derailleur systems | C.C. Wang., Y.C Hou., C.H. Tseng., Z.H. Fong., | Design Optimization With Application in industry |
| 1997--- | 期刊論文 | Mathematical model of spiral bevel and hypoid gears manufactured by the modified roll method | CHUNG-YUNN LIN,CHUNG-BIAU TSAY,ZHANG-HUA FONG | Mechanism and Machine Theory |
| 1996--- | 期刊論文 | A method for improving bicycle shifting performance | Wang. C.C., Tseng. C.H.,Fong. Z.H. | International Journal of Vehicle Design |
| 1996--- | 期刊論文 | An efficient optimum design procedure for bicycle rear derailleurs | Hou. Y.C., Su. S.H., Tseng. C.H., Fong. Z.H. | International Journal of Vehicle Design |
| 1996--- | 期刊論文 | Contact pattern development of spiral bevel and hypoid gears by applying optimization techniques | Lin. Chung-Yunn, Tsay. Chung-Biau, Fong. Zhang-Hua | Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Eng |
| 1996--- | 期刊論文 | Tooth contact analysis of hypoid gears | Lin. Chung-Yunn, Tsay. Chung-Biau, Fong. Zhang-Hua | Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Eng |
| 1992-09 | 期刊論文 | Kinematical Optimization of Spiral Bowel Gears | Zhang-Hua Fong*,Chung-Biau Tsay | Journal of Mechanical Design - Transactions of the ASME |
| 1992--- | 期刊論文 | The Undercutting of Circular-Cut Spiral Bevel Gears | 馮展華,蔡忠杓 | Journal of Mechanical Design |
| 1991-09 | 期刊論文 | A Study on the Tooth Geometry and Cutting Machine Mechanisms of Spiral Bevel Gears | Z. H. Fong,Bill Chung-Biau Tsay | Journal of mechanisms, transmissions, and automation in design |
| 1991-06 | 期刊論文 | A Mathematical Model for the Tooth Geometry of Circular-Cut Spiral Bevel Gears | Z. H. Fong*,Chung-Biau Tsay | Journal of mechanisms, transmissions, and automation in design |
| 1991--- | 期刊論文 | Computer simulation and stress analysis of helical gears with pinion circular arc teeth and gear involute teeth | Tsay. C.-B., Fong. Z.H. | Mechanism and Machine Theory |
| 1990--- | 期刊論文 | Tooth contact analysis of spiral bevel gears | Fong, Zhang-Hua, Tsay. Chung-Biau | Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Eng |
| 1989--- | 期刊論文 | The mathematical model of Wildhaber-Novikov gears applicable to finite element stress analysis | Tsay. C.-B., Fong. Z.H., Tao. S. | Mathematical and Computer Modelling |
| 1988-08 | 期刊論文 | Characteristic Study of Helical Gears with Pinion Circular Arc Teeth and Gear Involute Teeth | C.B. Tsay., Z.H. Fong., | 中國機械工程學刊 |
| 1987-12 | 研討會論文 | Tooth contact analysis for helical gears with pinion circular arc teeth and gear involute shaped teeth | Tsay. C.-B., Fong. Z.H. |