| 出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
| 2025-09 |
期刊論文
|
Effects of stoichiometry and substrate temperature on the mechanical properties of (ZrxTa1-x)By films |
Yung-I Chen*, Yu-Ting Ye, Li-Chun Chang, Ting-Kai, Chang |
Surface and Coatings Technology
|
| 2025-08 |
期刊論文
|
Structural Evolution, Mechanical Properties, and Thermal Stability of Multi-Principal TiZrHf(Ta, Y, Cr) Alloy Films |
Yung-I Chen*, Tzu-Yu Ou, Li-Chun Chang, Yan-Zhi Liao |
Materials
|
| 2025-07 |
期刊論文
|
Effects of silicon content on the characterization of (CrTaWSi)Nx thin films |
Li-Zhu Wang, Li-Chun Chang, Yung-I Chen* |
Surface and Coatings Technology
|
| 2025-05 |
期刊論文
|
Effects of thickness ratio on phase structures, mechanical properties, and oxidation resistance of CrSiN/WSiN bilayer films |
Yung-I Chen*, Li-Zhu Wang, Yu-Ting Ye, Li-Chun Chang, Heng-Ching Yu |
Surface and Coatings Technology
|
| 2024-10 |
期刊論文
|
Effects of substrate temperature and bias voltage on mechanical properties of cosputtered (TiZrHfTa)Nx films |
Tzu-Yu Ou, Li-Chun Chang, Yung-I Chen* |
Surface and Coatings Technology
|
| 2024-10 |
期刊論文
|
Mechanical and tribological properties of laminated (NbTaMoW)Nx films |
Yan-Zhi Liao, Yung-I Chen* |
Materials
|
| 2024-08 |
期刊論文
|
The effects of nitrogen content on the mechanical and tribological properties of CrTaWNx thin films |
Li-Chun Chang, Li-Zhu Wang, Yung-I Chen* |
Coatings
|
| 2024-05 |
期刊論文
|
Characterization of cosputtered (TiZrHfY)Nx films |
Tzu-Yu Ou, Li-Chun Chang, Yung-I Chen*, Chun-Sheng Yu |
Surface and Coatings Technology
|
| 2024-04 |
期刊論文
|
Characterization of ZrBSiTaNx films |
Kuo-Hong Yeh, Li-Chun Chang, Yung-I Chen* |
Coatings
|
| 2024-04 |
期刊論文
|
Effects of thickness ratio on phase structures, mechanical properties, and wear behaviors of CrN/ZrB2 bilayer films |
Hsun-Sung Chiu, Tzu-Yu Ou, Yung-I Chen* |
Surface and Coatings Technology
|
| 2024-02 |
期刊論文
|
Effects of nitrogen flow ratio on the mechanical and anticorrosive properties of cosputtered (TiZrHfTa)Nx films |
Tzu-Yu Ou, Li-Chun Chang, Muthaiah Annalakshmi, Jyh-Wei Lee, Yung-I Chen* |
Surface and Coatings Technology
|
| 2023-10 |
期刊論文
|
Effects of bias voltage and substrate temperature on the mechanical properties and oxidation behavior of CrWSiN films |
Li-Chun Chang, Chin-Han Tzeng, Tzu-Yu Ou, Yung-I Chen* |
Coatings
|
| 2023-09 |
期刊論文
|
Structural, mechanical, and anticorrosive properties of (TiZrNbTa)Nx films |
Cheng-Yi Lai, Yung-I Chen* |
Journal of Materials Research and Technology
|
| 2022-12 |
期刊論文
|
Mechanical and anticorrosive properties of TiNbTa and TiNbTaZr films on Ti-6Al-4V alloy |
Yung-I Chen*, Yi-Jyun Chen, Cheng-Yi Lai, Li-Chun Chang |
Coatings
|
| 2022-11 |
期刊論文
|
Effects of nitrogen flow ratio on the structural, mechanical, and anticorrosive properties of co-sputtered (NbTaMoW)Nx films |
Jyh-Wei Lee, Chun-Yen Chen, Yi-Jyun Chen, Chin-Han Tzeng, Yung-I Chen* |
Journal of Materials Research and Technology
|
| 2022-11 |
期刊論文
|
Mechanical properties and oxidation behavior of TaWSiN films |
Chin-Han Tzeng, Li-Chun Chang, Yung-I Chen* |
Materials
|
| 2022-10 |
技術報告
|
濺鍍鋯基金屬玻璃鍵結層連結大氣電漿噴流氧化物頂層的熱阻障系統 |
陳永逸 |
|
| 2022-06 |
期刊論文
|
Diffusion barrier characteristics of WSiN films |
Yung-I Chen, Kuo-Hong Yeh, Tzu-Yu Ou, Li-Chun Chang* |
Coatings
|
| 2022-05 |
期刊論文
|
Effects of W content on structural and mechanical properties of TaWN films |
Li-Chun Chang, Chin-Han Tzeng, Yung-I Chen* |
Coatings
|
| 2022-05 |
期刊論文
|
Mechanical properties and oxidation behavior of CrWSiN films |
Li-Chun Chang, Ming-Ching Sung, Yung-I Chen*, Chin-Han Tseng |
Surface and Coatings Technology
|
| 2021-12 |
期刊論文
|
Effects of bias voltage and substrate temperature on the mechanical properties and oxidation behavior of CrSiN films |
Li-Chun Chang, Ming-Ching Sung, Yung-I Chen* |
Vacuum
|
| 2021-11 |
期刊論文
|
Characterization of cosputtered NbTaMoW films |
Yung-I Chen*, Chun-Yen Chen, Li-Chun Chang, Wu Kai |
Journal of Materials Research and Technology
|
| 2021-10 |
技術報告
|
循環漸變成分多元合金及其氮化物濺鍍膜層的機械性質與高溫穩定性 |
陳永逸 |
|
| 2021-01 |
期刊論文
|
Oxidation behavior and interdiffusion of Ta–Al multilayer films and Inconel 617 alloy |
Yi-En Ke, Li-Chun Chang, Wu Kai, Yung-I Chen* |
Surface and Coatings Technology
|
| 2021-01 |
期刊論文
|
Thermal stability of atmospheric pressure plasma jet-deposited ZrO2 top coats and sputtered RuAl/RuAlZr/Ru bond coats on Inconel 617 |
Rong-Tan Huang, Yi-En Ke, Ting-En Lu, Yung-I Chen* |
Journal of Materials Research and Technology
|
| 2020-12 |
期刊論文
|
Effects of the nitrogen flow ratio and substrate bias on the mechanical properties of W–N and W–Si–N films |
Li-Chun Chang, Ming-Ching Sung, Li-Heng Chu, Yung-I Chen* |
Coatings
|
| 2020-10 |
期刊論文
|
Thermal stability of laminated Ru–Al/Ru–Si–Zr coatings on Inconel 617 |
Yung-I Chen*, Hsien-Hao Lo, Yi-En Ke |
Surface and Coatings Technology
|
| 2020-10 |
技術報告
|
超合金表面改質具有循環漸變成分堆疊薄膜的合金鍵結層之氧化行為 |
陳永逸 |
|
| 2020-05 |
期刊論文
|
Effects of nitrogen flow ratio on structures, bonding characteristics, and mechanical properties of ZrNx films |
Yi-En Ke, Yung-I Chen* |
Coatings
|
| 2020-05 |
期刊論文
|
Rapid thermal annealing of Cr–Si–N, Ta–Si–N, and Zr–Si–N coatings in glass molding atmospheres |
Yung-I Chen*, Yi-En Ke, Ming-Ching Sung, Li-Chun Chang |
Surface and Coatings Technology
|
| 2020-04 |
期刊論文
|
Mechanical properties, bonding characteristics, and thermal stability of magnetron-sputtered HfNx films |
Yi-En Ke, Yung-I Chen* |
Surface and Coatings Technology
|
| 2019-12 |
期刊論文
|
Oxidation behavior of Ta–Al multilayer coatings |
Yung-I Chen*, Nai-Yuan Lin, Yi-En Ke |
Coatings
|
| 2019-10 |
期刊論文
|
Mechanical properties and oxidation behavior of W–Si–N coatings |
Yu-Heng Liu, Li-Chun Chang, Bo-Wei Liu, Yung-I Chen* |
Surface and Coatings Technology
|
| 2019-10 |
技術報告
|
濺鍍製備具有循環梯度成分的非晶質含矽過渡金屬氮化物鍍層的機械性質與抗氧化特性 |
陳永逸 |
|
| 2019-09 |
期刊論文
|
Effect of bias voltage on mechanical properties of HiPIMS/RFMS cosputtered Zr–Si–N films |
Yung-I Chen, Yu-Zhe Zheng, Li-Chun Chang*, Yu-Heng Liu |
Materials
|
| 2019-08 |
期刊論文
|
Mechanical properties and oxidation behavior of Cr–Si–N coatings |
Li-Chun Chang, Yu-Heng Liu, Yung-I Chen* |
Coatings
|
| 2019-03 |
期刊論文
|
Thermal stability of laminated Ru–Al/Ru–Al–Zr coatings on Inconel 617 |
Yung-I Chen*, Jia-Wei Jhang |
Surface and Coatings Technology
|
| 2018-10 |
期刊論文
|
Mechanical properties and oxidation behavior of multilayered Hf–Si–N coatings |
Li-Chun Chang, Bo-Wei Liu, Yung-I Chen* |
Coatings
|
| 2018-09 |
期刊論文
|
Mechanical properties, bonding characteristics, and oxidation behaviors of Nb–Si–N coatings |
Yung-I Chen*, Yu-Xiang Gao, Li-Chun Chang, Yi-En Ke, Bo-Wei Liu |
Surface and Coatings Technology
|
| 2018-08 |
期刊論文
|
Mechanical properties of Zr–Si–N films fabricated through HiPIMS/RFMS co-sputtering |
Li-Chun Chang*, Yu-Zhe Zheng, Yung-I Chen |
Coatings
|
| 2018-07 |
期刊論文
|
Thermal stability of Ru–Al multilayered thin films on Inconel 617 |
Yung-I Chen*, Zhi-Ting Zheng, Jia-Wei Jhang |
Metals
|
| 2018-05 |
期刊論文
|
Bonding characteristics and chemical inertness of Zr–Si–N coatings with a high Si content in glass molding |
Li-Chun Chang, Yu-Zhe Zheng, Yung-I Chen*, Shan-Chun Chang, Bo-Wei Liu |
Coatings
|
| 2017-12 |
期刊論文
|
Oxidation behavior of Ta–Si–N coatings |
Yung-I Chen*, Yu-Xiang Gao, Li-Chun Chang |
Surface and Coatings Technology
|
| 2017-06 |
期刊論文
|
Mechanical properties and oxidation resistance of sputtered Cr–W–N coatings |
Li-Chun Chang*, Yu-Zhe Zheng, Yu-Xiang Gao, Yung-I Chen |
Surface and Coatings Technology
|
| 2017-06 |
期刊論文
|
Oxidation behavior of Ru–Al multilayer coatings |
Yung-I Chen*, Zhi-Ting Zheng, Wu Kai, Yu-Ren Huang |
Applied Surface Science
|
| 2017-06 |
期刊論文
|
Oxidation resistance and mechanical properties of Zr–Si–N coatings with cyclic gradient concentration |
Yung-I Chen*, Shan-Chun Chang, Li-Chun Chang |
Surface and Coatings Technology
|
| 2017-04 |
期刊論文
|
Internally oxidized Ru–Zr multilayer coatings |
Yung-I Chen*, Tso-Shen Lu, Zhi-Ting Zheng |
Coatings
|
| 2016-12 |
期刊論文
|
Internal oxidation of laminated Nb–Ru coatings |
Yung-I Chen*, Hsiu-Nuan Chu, Wu Kai |
Applied Surface Science
|
| 2016-10 |
期刊論文
|
Oxidation resistance and mechanical properties of Ta–Al–N coatings |
Yung-I Chen*, Jun-Hsin Lin, Chau-Chang Chou |
Surface and Coatings Technology
|
| 2016-10 |
技術報告
|
釕及鉭合金鍍層內部氧化行為、氧化動力學及熱循環效應研究 |
陳永逸 |
|
| 2016-03 |
期刊論文
|
Internal oxidation of laminated Hf–Ru coatings |
Yung-I Chen*, Yu-Ren Huang, Li-Chun Chang |
Journal of Vacuum Science & Technology A
|
| 2016-03 |
期刊論文
|
Mechanical properties and oxidation behavior of ZrNx thin films fabricated through high-power impulse magnetron sputtering deposition |
Li-Chun Chang*, Ching-Yen Chang, Yung-I Chen, Hsuan-Ling Kao |
J. Vac. Sci. Technol. A
|
| 2015-11 |
期刊論文
|
Oxidation behavior and mechanical properties of laminated Hf–Ta coatings |
Yung-I Chen*, Yu-Ren Huang, Li-Chun Chang |
Applied Surface Science
|
| 2015-10 |
期刊論文
|
Chemical inertness of Cr–W–N coatings in glass molding |
Yung-I Chen*, Yu-Ru Cheng, Li-Chun Chang, Jyh-Wei Lee |
Thin Solid Films
|
| 2015-10 |
期刊論文
|
Internal oxidation of laminated ternary Ru–Ta–Zr coatings |
Yung-I Chen*, Tso-Shen Lu |
Applied Surface Science
|
| 2015-10 |
期刊論文
|
Mechanical properties and oxidation resistance of reactively sputtered Ta1 − xZrxNy thin films |
Li-Chun Chang*, Ching-Yen Chang, Yung-I Chen |
Surface & Coatings Technology
|
| 2015-06 |
期刊論文
|
Chemical inertness of Ta–Si–N coatings in glass molding |
Yung-I Chen*, Yu-Ru Cheng, Li-Chun Chang, Tso-Shen Lu |
Thin Solid Films
|
| 2014-12 |
期刊論文
|
Oxidation resistance and mechanical properties of Cr–Ta–Si–N coatings in glass molding processes |
Yung-I Chen*, Hsiu-Hui Wang |
Surface and Coatings Technology
|
| 2014-11 |
期刊論文
|
The chemical inertness of Ir–Re and Ta–Ru coatings in molding B2O3–ZnO–La2O3-based glass |
Shih-Chang Liu, Yung-I Chen*, Jiin-Jyh Shyu, Hung-Yin Tsai, Kun-Yi Lin, Yung-Hsing Chen, Kuo-Cheng Lin |
Surface and Coatings Technology
|
| 2014-11 |
期刊論文
|
Thermal stability of TaN, CrTaN, TaSiN, and CrTaSiN hard coatings in oxygen containing atmospheres |
Yung-I Chen*, Kun-Yi Lin, Hsiu-Hui Wang, Kuo-Cheng Lin |
Surface and Coatings Technology
|
| 2014-08 |
技術報告
|
非結晶氮化物硬膜於模造玻璃應用可行性評估 |
陳永逸 |
|
| 2014-06 |
期刊論文
|
Characterization of Ta–Si–N coatings prepared using direct current magnetron co-sputtering |
Yung-I Chen*, Kun-Yi Lin, Hsiu-Hui Wang, Yu-Ru Cheng |
Applied Surface Science
|
| 2014-03 |
期刊論文
|
Internal oxidation and mechanical properties of Ru based alloy coatings |
Yung-I Chen*, Hsiu-Nuan Chu, Li-Chun Chang, Jyh-Wei Lee |
Journal of Vacuum Science & Technology A
|
| 2013-12 |
期刊論文
|
Thermal stability of Ir–Re coatings annealed in oxygen containing atmospheres |
Shih-Chang Liu, Yung-I Chen*, Hung-Yin Tsai, Kuo-Cheng Lin, Yung-Hsing Chen |
Surface and Coatings Technology
|
| 2013-10 |
期刊論文
|
Thermal stability of CrTaN hard coatings prepared using biased direct current sputter deposition |
Yung-I Chen*, Kun-Yi Lin, Chau-Chang Chou |
Thin Solid Films
|
| 2013-10 |
期刊論文
|
X-ray photoelectron spectroscopy and transmission electron microscopy study of internally oxidized Nb–Ru coatings |
Yung-I Chen*, Sin-Min Chen, Li-Chun Chang, Hsiu-Nuan Chu |
Thin Solid Films
|
| 2013-10 |
技術報告
|
釕及鉭合金鍍層內部氧化行為及氧化動力學研究 |
陳永逸 |
|
| 2013-08 |
技術報告
|
高折射率光學玻璃之模造硬膜可靠性評估 |
陳永逸 |
|
| 2013-02 |
期刊論文
|
Oxidation Study of Ta–Zr Coatings |
Yung-I Chen*, Sin-Min Chen |
Thin Solid Films
|
| 2013-01 |
期刊論文
|
Annealing effects on nanostructure and mechanical properties of nanolaminated Ta–Zr coatings |
Yung-I Chen*, Sin-Min Chen |
Surface and Coatings Technology
|
| 2012-12 |
期刊論文
|
Laminated Structure in internally oxidized Ru–Ta coatings |
Yung-I Chen* |
Thin Solid Films
|
| 2012-09 |
期刊論文
|
Annealing of sputter-deposited nanocrystalline Cr–Ta Coatings in a low-oxygen-containing atmosphere |
Li-Chun Chang*, Yung-I Chen, Hsuan-Ling Kao |
Thin Solid Films
|
| 2012-04 |
技術報告
|
鈦合金表面處理技術評估 |
陳永逸 |
|
| 2012-01 |
期刊論文
|
Oxidation study of Cr–Ru hard coatings |
Yung-I Chen*, Yu-Chu Kuo, Sin-Min Chen |
Thin Solid Films
|
| 2011-12 |
期刊論文
|
Preparation and annealing study of CrTaN coatings on WC-Co |
Yung-I Chen*, Yu-Ting Lin, Li-Chun Chang, Jyh-Wei Lee |
Surface and Coatings Technology
|
| 2011-09 |
技術報告
|
模造玻璃模仁表面改質與氧化行為研究 |
陳永逸 |
|
| 2011-05 |
期刊論文
|
Internal Oxidation Mechanism for Ta–Ru and Mo–Ru Coatings |
Yung-I Chen*, Bing-Nan Tsai |
Thin Solid films
|
| 2011-05 |
期刊論文
|
Preparation and annealing study of TaNx coatings on WC-Co substrates |
Yung-I Chen*, Bo-Lu Lin, Yu-Chu Kuo, Jen-Ching Huang, Li-Chun Chang, Yu-Ting Lin |
Applied Surface Science
|
| 2010-12 |
期刊論文
|
Annealing and Oxidation Study of Ta–Ru Hard Coatings |
Yung-I Chen*, Bing-Nan Tsai |
Surface and Coatings Technology
|
| 2010-10 |
技術報告
|
釕基高溫金屬合金硬膜在模造玻璃模具之應用研究 |
陳永逸 |
|
| 2010-05 |
期刊論文
|
Internal oxidation of Mo–Ru coatings |
Yung-I Chen*, Li-Chun Chang, Rong-Tan Huang, Bing-Nan Tsai, Yu-Chu Kuo |
Thin Solid Films
|
| 2009-12 |
期刊論文
|
Investigation on the Oxidation Behavior of Mo–Ru Hard Coatings |
Yung-I Chen* |
Surface and Coatings Technology
|
| 2009-11 |
期刊論文
|
Annealing and Oxidation Study of Mo–Ru Hard Coatings on Tungsten Carbide |
Yung-I Chen*, Li-Chun Chang, Jyh-Wei Lee, Chih-Hsiung Lin |
Thin Solid Films
|
| 2009-10 |
技術報告
|
模造玻璃用高溫金屬合金硬膜的氧化行為研究 |
陳永逸 |
|
| 2009-03 |
期刊論文
|
以液態原子力顯微鏡即時觀察合金薄膜剝除行為之研究 |
郭裕竹、李志偉*、張麗君、陳永逸、王朝正、黃仁清 |
防蝕工程
|
| 2007-12 |
期刊論文
|
Detaching mechanism for Mo–Ru hard coating on tungsten carbide |
Li-Chun Chang*, Yung-I Chen, Jyh-Wei Lee, Hung-Yi Lin, Yu-Chu Kuo, and Chaur-Jeng Wang |
Surface and Coatings Technology
|
| 2007-05 |
期刊論文
|
Mechanical Properties of Mo–Ru Thin Films with Ni interlayer of different thickness |
Chi-Yun Kang, Yung-I Chen, Chih-Hsiung Lin, Jenq-Gong Duh* |
Applied Surface Science
|
| 2006-12 |
期刊論文
|
Mo-Ru Coatings on Tungsten Carbide by Direct Current Magnetron Sputtering |
Yung-I Chen, Kuan-Ting Liu, Fan-Bean Wu, Jenq-Gong Duh* |
Thin Solid Films
|
| 2004-12 |
期刊論文
|
The Influence of Thermal Treatment on The Microstructure and Hardness in Electroless Ni-P-W Deposit |
S.K. Tien, J.G. Duh* and Y.I. Chen |
Thin Solid Films
|
| 2004-01 |
期刊論文
|
Structure, thermal stability and mechanical properties of electroless Ni-P-W alloy coatings during cycle test |
S.K. Tien, J.G. Duh* and Y.I. Chen |
Surface and Coatings Technology
|
| 2003-01 |
期刊論文
|
Ir-Base Multi-Component Coating on Tungsten Carbide by RF Magnetron Sputtering Process |
F.B.Wu, W.Y.Chen, J.G.Duh*, Y.Y.Tsai, and Y.I.Chen |
Surface and Coatings Technology
|
| 2002-01 |
期刊論文
|
Fabrication, Thermal Stability and Microhardness of Sputtered Ni-P-W Coating |
F.B.Wu, Y.I.Chen, P.J.Peng, Y.Y.Tsai, J.G.Duh* |
Surface and Coatings Technology
|
| 2001-10 |
期刊論文
|
Thermal Stability and Mechanical Properties of Ni-W-P Electroless Deposits |
Y.Y.Tsai, F.B.Wu, Y.I.Chen, P.J.Peng, J.G.Duh*, and S.Y.Tsai |
Surface and Coatings Technology
|
| 2001-05 |
期刊論文
|
Fabrication and Crystallization Behaviors of Sputtered Ni-Cu-P Films on Tool Steel |
Y.C.Chang, J.G.Duh*, and Y.I.Chen |
Surface and Coatings Technology
|
| 1991-11 |
期刊論文
|
TiN coatings on mild steel substrates with electroless nickel as an interlayer |
Yung-I Chen, Jenq-Gong Duh* |
Surface and Coatings Technilogy
|
| 1991-09 |
期刊論文
|
Deposition of TiN films with titanium interlayer on low carbon steel by reactive r.f. magnetron sputtering |
Yung-I Chen, Jenq-Gong Duh* |
Surface and Coatings Technology
|
主要學歷