| 出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
| 2025-04 |
期刊論文
|
Explainable AI (XAI) -based Facility Control System for Energy Saving and Carbon Reduction |
Hao Tieng, Chien-Yuan Lai, Sheng-Xiang Fan, and Tung-Qing Wu |
Journal of Mechanical Science and Technology, vol.39, no.4 pp. 2301- pp.2310.
|
| 2024-11 |
期刊論文
|
Generic Tool-Performance-Estimation Scheme for Anomaly Detection of Equipment |
Hao Tieng, Wei-Chih Liao, Chien-Yuan Lai, and Sheng-Xiang Fan |
Journal of Mechanical Science and Technology, vol. 38, no. 11, pp. 6181-6191
|
| 2024-11 |
研討會論文
|
Explainable Artificial Intelligence Approaches for Deep Learning-based Energy Management System |
Tung-Qing Wu, and Hao Tieng |
|
| 2024-06 |
期刊論文
|
Design of Green Power Clouds for Intelligent Virtual Power Plants |
Ting-Chia Ou, Hao Tieng, Tsung-Han Tsai, Yu-Yong Li, Min-Hsiung Hung, Fan-Tien Cheng |
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
|
| 2023-12 |
期刊論文
|
I4.2-GiM: A Novel Green Intelligent Manufacturing Framework for Net Zero |
Hao Tieng, Ting-Chia Ou, Tsung-Han Tsai , Yu-Yong Li,
Min-Hsiung Hung, and Fan-Tien Cheng |
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
|
| 2023-12 |
研討會論文
|
Research on incentive mechanism of energy storage system aggregation participating in demand response (儲能系統聚合參與需量反應獎勵機制獎勵機制之研究) |
歐庭嘉 丁顥 范盛翔 陳鈺昇 劉宇涵 范裕慈 |
|
| 2023-01 |
專書
|
工業4.1: 零缺陷的智慧製造- ch3通訊標準 |
鄭芳田、丁顥、邱煜程 |
成大出版社
|
| 2023-01 |
專書
|
工業4.1:零缺陷的智慧製造-ch2資料收集與資料前處理 |
丁顥、楊浩青、李育壅 |
成大出版社
|
| 2022-11 |
研討會論文
|
Tool-Performance-Estimation Scheme for Equipment Status Monitoring |
Wei-Chih Liao, Hao Tieng, Chien-Yuan Lai, Sheng-Xiang Fan, Haw-Ching Yang, and Fan-Tien Cheng |
|
| 2022-09 |
期刊論文
|
Using Transfer Learning to Reduce Preparing Time of Online Diagnosis with Limited Rotating-Component Data |
Hao Tieng, Yu-Yong Li, Ming.-Xuan. Liu ,Wei-Chih Liao ,Chien-Yuan Lai, and Sheng-Xiang Fan |
Journal of Material Sciences & Manufacturing Research
|
| 2022-08 |
研討會論文
|
A Novel Implementation Framework of Digital Twins for Intelligent Manufacturing based on Container Technology and Cloud Manufacturing Services |
Min-Hsiung Hung, Yu-Chuan Lin, Hung-Chang Hsiao, Chao-Chun Chen, Kuan-Chou Lai, Yu-Ming Hsieh, Hao Tieng, Tsung-Han Tsai, Hsien-Cheng Huang, Haw-Ching Yang, Fan-Tien Cheng |
|
| 2022-01 |
期刊論文
|
A Novel Implementation Framework of Digital Twins for Intelligent Manufacturing based on Container Technology and Cloud Manufacturing Services |
Min-Hsiung Hung , Yu-Chuan Lin , Hung-Chang Hsiao ,
Chao-Chun Chen , Kuan-Chou Lai , Yu-Ming Hsieh ,
Hao Tieng , Tsung-Han Tsai, Hsien-Cheng Huang,Haw-Ching Yang , and Fan-Tien Cheng |
IEEE Transactions on Automation Science and Engineering
|
| 2021-10 |
專書
|
Industry 4.1: Intelligent Manufacturing with Zero Defects (IEEE Press Series on Systems Science and Engineering Series)-Ch3: Communication Standards |
Fan-Tien Cheng, Hao Tieng, Yu-Chen Chiu |
Wiley-IEEE
|
| 2021-10 |
專書
|
Industry 4.1: Intelligent Manufacturing with Zero Defects(IEEE Press Series on Systems Science and Engineering Series)-Ch2 Data Acquisition and Preprocessing |
Hao Tieng, Haw-Ching Yang, Yu-Yong Li |
Wiley-IEEE
|
| 2020-06 |
研討會論文
|
An Automated Dynamic-Balancing-Inspection Scheme for Wheel Machining |
Hao Tieng, Yu-Yong Li, Kuang-Ping Tseng, Haw-Ching Yang, and Fan-Tien Cheng |
|
| 2020-02 |
期刊論文
|
An Automated Dynamic-Balancing-Inspection Scheme for Wheel Machining |
Hao Tieng, Yu-Yong Li, Kuang-Ping Tseng, Haw-Ching Yang, and Fan-Tien Cheng |
IEEE Robotics and Automation Letters
|
| 2019-05 |
研討會論文
|
A Gradual Refreshing Scheme for Improving Tool Utilization |
Haw-Ching Yang, Tsung-Han Tsai, Hao Tieng, and Fan-Tien Cheng |
|
| 2019-02 |
期刊論文
|
A Gradual Refreshing Scheme for Improving Tool Utilization |
Haw-Ching Yang, Tsung-Han Tsai, Hao Tieng, and Fan-Tien Cheng
|
IEEE Robotics and Automation Letters
|
| 2018-05 |
研討會論文
|
Automatic Virtual Metrology and Deformation Fusion Scheme for Engine-Case Manufacturing |
Hao Tieng, Tsung-Han Tsai, Chun-Fang Chen, Haw-Ching Yang, Jhih-Wei Huang, and Fan-Tien Cheng |
|
| 2018-02 |
期刊論文
|
Automatic Virtual Metrology and Deformation Fusion Scheme for Engine-Case Manufacturing |
Hao Tieng, Tsung-Han Tsai, Chun-Fang Chen, Haw-Ching Yang, Jhih-Wei Huang, and Fan-Tien Cheng
|
IEEE Robotics and Automation Letters
|
| 2017-05 |
研討會論文
|
Automatic Virtual Metrology and Target Value Adjustment for Mass Customization |
Hao Tieng, Chun-Fang Chen, Fan-Tien Cheng, Haw-Ching Yang |
|
| 2017-02 |
期刊論文
|
Automatic Virtual Metrology and Target Value Adjustment for Mass Customization |
Hao Tieng, Chun-Fang Chen, Fan-Tien Cheng, and Haw-Ching Yang
|
IEEE Robotics and Automation Letters
|
| 2016-05 |
研討會論文
|
Industry 4.1 for Wheel Machining Automation |
Fan-Tien Cheng, Hao Tieng, Haw-Ching Yang, Min-Hsiung Hung, Yu-Chuan Lin, Chun-Fan Wei, and Zih-Yan Shieh |
|
| 2016-01 |
期刊論文
|
Industry 4.1 for Wheel Machining Automation |
Fan-Tien Cheng, Hao Tieng, Haw-Ching Yang, Min-Hsiung Hung, Yu-Chuan Lin, Chun-Fan Wei, Zih-Yan Shieh |
IEEE Robotics and Automation Letters
|
| 2015-10 |
期刊論文
|
Automatic virtual metrology for wheel machining automation |
Haw-Ching Yang, Hao Tieng, and Fan-Tien Cheng |
International Journal of Production Research
|
| 2015-08 |
研討會論文
|
Extracting Relevant Features for Diagnosing Machine Tool Faults in Cloud Architecture |
Yu-Yong Li, Hao Tieng, Haw-Ching Yang, and Fan-Tien Cheng |
|
| 2015-08 |
研討會論文
|
Total Precision Inspection of Machine Tools with Virtual Metrology |
Hao Tieng, Haw-Ching Yang, and Fan-Tien Cheng |
|
| 2015-07 |
期刊論文
|
Total Precision Inspection of Machine Tools with Virtual Metrology |
Haw-Ching Yang, Hao Tieng, and Fan-Tien Cheng |
Journal of the Chinese Institute of Engineers
|
| 2014-09 |
研討會論文
|
Development of Swing Classification Scheme for Lathe Spindle with Loading |
Yu-Yong Li, Haw-Ching Yang, Hao Tieng, and Fan-Tien Cheng |
|
| 2014-08 |
研討會論文
|
A Multi-Objective Optimization Approach for Selecting Key Features of Machining Processes |
Hao Tieng, Haw-Ching Yang, Min-Hsiung Hung, and Fan-Tien Cheng |
|
| 2013-05 |
研討會論文
|
A Novel Virtual Metrology Scheme for Predicting Machining Precision of Machine Tools |
Hao Tieng, Haw-Ching Yang, Min-Hsiung Hung, Fan-Tien Cheng |
|
| 2012-07 |
研討會論文
|
A Virtual-Metrology-Based Machining State Conjecture System |
Haw-Ching Yang, Hao Tieng, Yo-Yong Li, Min-Hsiung Hung, and Fan-Tien Cheng |
|
| 2011-09 |
研討會論文
|
Automatic Feature Selection and Failure Diagnosis for Bearing Faults |
Haw-Ching Yang, Hao Tieng, and Shih-Fang Chen |
|
主要學歷