| Date of Publication |
Category |
Title |
Author |
Source |
| 2023-04 |
期刊論文
|
以超音波量測已磨耗汽車離合器片之研究 |
郭哲宇，姚創文 |
國立台灣科技大學技術學刊
|
| 2019-12 |
期刊論文
|
A Study of Contact Interface for an Anti-Rotation Rivet Using Ultrasonic Detection |
Chuang Wen Yao and Hsueh Chih Cheng |
International Journal of Acoustics and Vibration
|
| 2019-02 |
期刊論文
|
Evaluating tool wear by measuring the real-time contact resistance. |
Chuang-Wen Yao and T. W. Hong. |
The International Journal of Advanced Manufacturing Technology.
|
| 2018-05 |
期刊論文
|
A wear diagnosis for brake pads by evaluation of contact interface. |
Chuang-Wen YAO and Yu-Wen CHEN. |
JSME, Journal of Advanced Mechanical Design, Systems, and Manufacturing.
|
| 2018-05 |
期刊論文
|
An ultrasonic method for 3D reconstruction of surface topography. |
C. W. Yao |
Journal of Physics Communications.
|
| 2016-08 |
期刊論文
|
Reference criteria for the timing of the replacement of a six-fluted end-mill cutter |
C. W. Yao, L. Z. Zhou |
The International Journal of Advanced Manufacturing Technology
|
| 2014-12 |
研討會論文
|
康定級艦主機連趕非破壞檢驗儀具研製(I) |
姚創文，歐招輝，施武樵 |
|
| 2014-11 |
期刊論文
|
A Study of Contact Interface and Wear Diagnosis for Hand Taps Using Ultrasonic Method |
C. W. Yao , C. C. Wu |
Journal of Applied Acoustics
|
| 2014-08 |
期刊論文
|
A Study of the Contact Interface of a T-slot Milling Cutter Using an Ultrasonic Method |
C. W. Yao, Y. X. Chien |
Journal of Machining Science and Technology
|
| 2014-01 |
期刊論文
|
A diagnosis method of wear and tool life for an endmill by ultrasonic detection |
Yao, C.W., Chien, Y.X. |
Journal of Manufacturing Systems
|
| 2013-11 |
期刊論文
|
Measurement of the Contact Area of a Dovetail Milling Cutter Using an Ultrasonic
Method |
C.W. Yao, L.Z. Zhou, Y.X. Chien |
Measurement
|
| 2013-03 |
期刊論文
|
An ultrasonic sensor for monitoring wheel flange/rail gauge corner contact |
R. S. Dwyer-Joyce, C. Yao, R. Lewis and H. Brunskill |
Proc IMechE Part F: Journal of Rail and Rapid Transit
|
| 2012-09 |
期刊論文
|
Feasibility study in application of forging waste heat on absorption cooling system |
C. W. Yao |
Journal of Renewable and Sustainable Energy, Vol.4, Issue 5, 053109(1-13), Sep. 2012.
|
| 2012-06 |
期刊論文
|
IPC 分類之壓鑄專利地圖研究 |
姚創文, 鄭守仁 |
高雄應用科技大學學報,高雄應用科技大學學報, 第41期, 281-290, 民國101 年5 月.
|
| 2009-10 |
期刊論文
|
Feasibility Study for Real Time Measurement of Wheel-Rail Contact Using an Ultrasonic Array |
R.S.Dwyer-Joyce, C.Yao, J.Zhang, R.Lewis, and B.W.Drinkwater |
ASME, Journal of Tribology
|
| 2009-01 |
專書
|
Experimental Methods for Measurement of Wheel and Rail Contact, PhD Thesis, The University of Sheffield, UK, 2009. |
C. Yao |
PhD Thesis, Sheffield, UK
|
| 2008-10 |
研討會論文
|
A Comparison of Three Methods for the Measurement of Wheel Rail Contact |
R.S.Dwyer-Joyce, C.Yao, and R.Lewis |
|
| 2008-04 |
研討會論文
|
A Rail Mounted Ultrasonic Sensor for Contact Patch Measurement |
R.S.Dwyer-Joyce, R.Lewis, B.W.Drinkwater, J.Zhang, and C.Yao |
|
| 2008-04 |
研討會論文
|
Feasibility Study for an Ultrasonic Sensor for Monitering Wheel Flange Contact |
R.Lewis, R.S.Dwyer-Joyce, and C.Yao |
|
Work experience information