| Date of Publication |
Category |
Title |
Author |
Source |
| 2025-07 |
期刊論文
|
Effects of chitosan addition on mechanical, surface and antibacterial properties of 3D printed photopolymers |
Pee-Yew Lee, Yung-Sheng Lin, Fan-Chun Hsieh, Chien-Yao Huang, Yen-Pei Lu |
J. Manufacturing Science and Engineering
|
| 2025-02 |
期刊論文
|
Hyperspectral analysis of silicon nanowires manufactured through metal-assisted chemical etching |
Pee-Yew Lee, Guo-Hao Lu, Yi-Hong Bai, Cheng-You Chen, Li-Yan Wu, Chun-Jen Weng , Hung Ji Huang d, Yung-Sheng Lin |
J. Manufacturing Science and Engineering
|
| 2025-01 |
期刊論文
|
Synthesis of Nanocrystals-embedded Bulk Metallic Glass Composites by a Combination of Mechanical Alloying and Vacuum Hot Pressing |
Pee-Yew Lee, Pei-Jung Chang, Chin-Yi Chen, Chung-Kwei Lin |
Materials
|
| 2024-04 |
期刊論文
|
Effects of Antiforming Agents on Manufacturing Silver Dendrites through Fluoride-assisted Galvanic Replacement Reaction |
Pee-Yew Lee, Chen-Yu Li, Yi-Hong Bai, Hung-Ji Huang, Chun-Jen Weng, Yung-Sheng Lin |
J. Manufacturing Science and Engineering
|
| 2024-02 |
期刊論文
|
Effects of Thermal Treatment on Sea-urchin-like Platinum Nanoparticles |
Hung Ji Huang, Li-Yan Wu, Tsung-Shine Ko, Chi-Wei Wu, Chu-Chi Liu, Jia-Jun Fan, Pee-Yew Lee*, Yung-Sheng Lin |
Applied Surface Science
|
| 2023-11 |
期刊論文
|
Endodontic Radiopacifying Application of Barium Titanate
Prepared through a Combination of Mechanical Milling and
Heat Treatment |
Hsiu-Na Lin, Wei-Wen Chen, Chun-Chun Hsu, May-Show Chen, Pei-Jung Chang, Wei-Min Chang, Fang-Hao Zhang, Chin-Yi Chen, Pee-Yew Lee, Chung-Kwei Lin |
Materials
|
| 2023-11 |
期刊論文
|
鎳錫非晶質合金粉末之機械合金化製備研究 |
張晴雯，李丕耀 |
粉體及粉末冶金會刊
|
| 2023-10 |
期刊論文
|
Effects of bubbles on manufacturing gold dendrites and silicon nanowires through the fluoride-assisted galvanic replacement reaction |
Pee-Yew Lee, Hung Ji Huang, Tsung-Shine Ko, Ying-Lun Hung, Li-Yan Wu, Jia-Jun Fan and
Yung-Sheng Lin |
J. Manufacturing Science and Engineering
|
| 2023-09 |
期刊論文
|
Bubble Effects on Manufacturing of Silicon Nanowires by Metal-Assisted Chemical Etching |
Pee-Yew Lee, Chun-Jen Weng, Hung Ji Huang , Li-Yan Wu , Guo-Hao Lu, Chao-Feng Liu, Cheng-You Chen, Ting-Yu Li, Yung-Sheng Lin |
J. Manufacturing Science and Engineering
|
| 2023-05 |
期刊論文
|
錫鈦合金粉末之機械合金化非晶質行為研究 |
周銘諺，李丕耀 |
粉體及粉末冶金會刊
|
| 2022-11 |
期刊論文
|
Discoloration Improvement by Mechanically-Milled Binary Oxides as Radiopacifier for Mineral Trioxide Aggregates |
Hsiu-Na Lin, Ling-Chi Wang, May-Show Chen, Pei-Jung Chang, Pin-Yu Lin, Alex Fang, Chin-Yi Chen, Pee-Yew Lee, Chung-Kwei Lin
|
Materials
|
| 2022-06 |
期刊論文
|
Moisture retention of glycerin solutions with various concentrations: a comparative study |
H. J. Chen, P. Y. Lee, C. Y. Chen, S. L. Huang, B. W. Huang, F. J. Dai, C. F. Chau, C. S. Chen & Y. S. Lin |
Scientific Reports
|
| 2022-04 |
期刊論文
|
Effect of Synthesis Time on Plasmonic Properties of Ag Dendritic Nanoforests |
Hung Ji Huang, Han-Wei Chang, Chia-Yen Lee, Ming-Hua Shiao, Yen-Ling Chiu, Pee-Yew Lee, Yung-Sheng Lin |
IUCrJ
|
| 2022-01 |
期刊論文
|
機械合金化之高熵合金回顧 (下) |
林霈豪，王煜斌，李丕耀 |
粉體及粉末冶金會刊
|
| 2021-12 |
期刊論文
|
Effect of Tantalum Pentoxide Addition on the Radiopacity Performance of Bi2O3/Ta2O5 Composite Powders Prepared by Mechanical Milling |
Hsiu-Na Lin, Chung-Kwei Lin, Pei-Jung Chang, Wei-Min Chang, Alex Fang, Chin-Yi Chen, Chia-Chun Yu*, Pee-Yew Lee* |
Materials
|
| 2021-11 |
研討會論文
|
電解液添加劑對複合負極材料的電化學性質研究 |
陳泓儒、李丕耀、陳金銘 |
|
| 2021-08 |
期刊論文
|
機械合金化之高熵合金回顧 (上) |
林霈豪,王煜斌,李丕耀 |
粉體及粉末冶金會刊
|
| 2021-08 |
期刊論文
|
複合氧化物應用於三氧礦化物顯影材料之可行性研究 |
林秀娜,余佳純,張沛蓉,林品宇,李丕耀,林中魁 |
粉體及粉末冶金會刊
|
| 2021-08 |
期刊論文
|
鈦鋯鎳銅非晶質合金硬焊填料應用於異種合金硬焊之研究 |
謝智鵬，張晴雯，周銘諺，李丕耀 |
粉體及粉末冶金會刊
|
| 2021-05 |
期刊論文
|
鈦鋯鎳銅高熵合金粉末之機械合金化非晶質行為研究 |
謝智鵬，周銘諺，郭承翰，李丕耀 |
粉體及粉末冶金會刊
|
| 2020-11 |
期刊論文
|
具調和組織型態之碲化鉍熱電材料製備與特性研究 |
謝岳憫，張晴雯，周銘諺，李丕耀 |
粉體與粉末冶金會刊
|
| 2020-09 |
期刊論文
|
(Ti50Cu28Ni15Sn7)/(Ni60Nb20Zr20)雙非晶質相複合材料塊材之機械合金及真空熱壓製備研究 |
林育瑋,李丕耀 |
粉體及粉末冶金會刊
|
| 2020-01 |
期刊論文
|
Effects of Milling Time, Zirconia Addition, and Storage Environment on the Radiopacity Performance of Mechanically Milled Bi2O3/ZrO2 Composite Powders |
May-Show Chen, Hsiu-Na Lin, Yu-Chun Cheng, Alex Fang, Chin-Yi Chen, Pee-Yew Lee and Chung-Kwei Lin |
Materials
|
| 2020-01 |
期刊論文
|
Ni20Nb20Ti20Fe20TM20(TM=Cu, Co)高熵合金粉末之固態非晶質化研究 |
黃皓翊，周銘諺，李丕耀 |
粉體及粉末冶金會刊
|
| 2019-11 |
研討會論文
|
具調和組織型態之碲化鉍材料製備研究
|
謝岳憫 李丕耀 林品宇
|
|
| 2019-10 |
研討會論文
|
Rapid Alloying Study of Bismuth and Tellurium Powder Mixtures under High Energy Ball Milling |
Pee-Yew Lee |
|
| 2019-06 |
期刊論文
|
Effect of Oxygen Concentration and Tantalum Addition on the Formation of High Temperature Bismuth Oxide Phase by Mechanochemical Reaction |
Hsiu-Na Lin, May-Show Chen, Yu-Hsueh Chang, Pee-Yew Lee,
Chung-Kwei Lin |
Materials
|
| 2019-06 |
研討會論文
|
Microstructural evolution of metastable mixed oxides in the Bi2O3-Ta2O5 system induced by mechanical alloying |
Chung-Kwei Lin and Pee-Yew Lee |
|
| 2019-06 |
研討會論文
|
Thermoelectric Properties of Zn4Sb3 Prepared by Mechanical Alloying and Different Consolidation Routes
|
Pee-Yew Lee |
|
| 2019-02 |
技術報告
|
氧化鋁之添加對銻化鋅合金熱電特性影響研究 |
李丕耀，鄭葉銘，林霈豪，謝岳憫 |
|
| 2018-12 |
研討會論文
|
雙非晶質相複合材料之製備與特性研究 |
林育瑋,林霈豪,李丕耀 |
|
| 2018-11 |
研討會論文
|
利用機械合金與火花電漿燒結法製備之(Al2O3)x/(Zn4Sb3)100-x複合材料性質研究 |
鄭葉銘,林霈豪,李丕耀 |
|
| 2018-06 |
期刊論文
|
Ti50Cu28Ni15Sn7金屬玻璃基複合材料之磨耗行為研究 |
許枝峰，林霈豪，鄭葉銘，李丕耀 |
粉體及粉末冶金會刊
|
| 2018-05 |
期刊論文
|
Evolution of Thermoelectric Properties of Zn4Sb3 Prepared by Mechanical Alloying and Different Consolidation Routes |
Pee-Yew Lee and Pei-Ho Lin |
Energies
|
| 2018-03 |
研討會論文
|
Enhancement of Thermoelectric Properties of Mechanically Alloyed Bi0.4Sb1.6Te3 Nanocomposites by Addition of γ-Al2O3 Particles
|
Pee-Yew Lee |
|
| 2018-03 |
研討會論文
|
Wear Behavior of Mechanically Alloyed Ti-based Bulk Metallic Glass Composites Containing Carbon Particles |
Pee-Yew Lee, Yung-Sheng Lin, Chia-Jung Hu, Chih-Feng Hsu |
|
| 2017-12 |
研討會論文
|
高熵非晶質合金之合成研究 |
林霈豪，黃皓翊，李丕耀 |
|
| 2017-08 |
期刊論文
|
摻雜不同氧化物之氧化鉍基複合粉體對牙髓修補材料特性影響之研究 |
葉文捷，李丕耀 |
粉體及粉末冶金會刊
|
| 2017-08 |
技術報告
|
摻雜γ-Al2O3之Bi-Sb-Te熱電複合材料特性研究 |
李丕耀，陳俊宇，簡楷峻，鄭葉銘 |
|
| 2017-05 |
期刊論文
|
Bi2O3高溫相之安定化研究 |
張鈺雪，李丕耀 |
粉體及粉末冶金會刊
|
| 2017-05 |
期刊論文
|
結合機械合金與真空熱壓方式製備之C/Ti50Cu28Ni15Sn7金屬玻璃複合材料腐蝕特性研究 |
許枝峰,鄭葉銘,李丕耀 |
粉體及粉末冶金會刊
|
| 2017-05 |
研討會論文
|
A Rapid detection technology of EVA encapsulant and backsheet for solar module |
Hsin-Hsin Hsieh, Yu-Hsien Lee, Yu-Tai Li, En-Yun Wang, Hung-Sun Wu and Pee-Yew Lee |
|
| 2017-04 |
期刊論文
|
Formation and Corrosion Behavior of Mechanically-Alloyed Cu–Zr–Ti Bulk Metallic Glasses |
Pee-Yew Lee, Yeh-Ming Cheng, Jyun-Yu Chen and Chia-Jung Hu |
Metals
|
| 2017-04 |
期刊論文
|
The wear properties of Ti-based bulk metallic glass composites containing carbon particles |
Pee-Yew Lee, Yung-Sheng Lin, Chia-Jung Hu, Chih-Feng Hsu |
Journal of Alloys and Compounds
|
| 2017-03 |
期刊論文
|
Consolidation of Mechanically Alloyed Cu-Zr-Ti Metallic Glass Powders |
Chung-Kwei Lin, Pee-Yew Lee |
Key Engineering Materials
|
| 2017-01 |
技術報告
|
結合機械合金與真空熱壓方式製備之Ti50Cu28Ni15Sn7/Zn4Sb3奈米複合材料熱電特性研究
|
李丕耀，鄭宇君，賴星佑 |
|
| 2016-12 |
研討會論文
|
C/Ti50Cu28Ni15Sn7塊狀金屬玻璃複合材料之製備與磨耗特性研究 |
許枝峰，李丕耀，陳俊宇，鄭葉銘 |
|
| 2016-11 |
期刊論文
|
Wear Behavior of Mechanically Alloyed Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes
|
Yung-Sheng Lin, Chih-Feng Hsu, Jyun-Yu Chen, Yeh-Ming Cheng,Pee-Yew Lee |
Metals
|
| 2016-11 |
研討會論文
|
Cu60Zr30Ti10金屬玻璃在350oC下之氧化行為研究 |
陳俊宇，李家瑨，鄭葉銘，李丕耀，開物 |
|
| 2016-11 |
研討會論文
|
機械合金法製備Zn4Sb3合金粉末可行性研究
|
鄭葉銘，陳俊宇，簡楷峻，李丕耀
|
|
| 2016-09 |
期刊論文
|
具微米/奈米結構之碲化鉍基熱電複合材料特性研究 |
陳俊宇，鄭葉銘，徐國洋，陳子謙，黃菁儀，徐泓璋，李丕耀 |
金屬熱處理
|
| 2016-07 |
研討會論文
|
Thermoelectric properties of amorphous Ti50Cu28Ni15Sn7-dispersed Bi0.4Sb1.6Te3 nanocomposite fabricated by mechanical alloying and vacuum hot pressing |
Pee-Yew Lee, Tzu-Chien Chen, Jing-Yi Huang, Huey-Lin Hsieh |
|
| 2016-06 |
研討會論文
|
氧化鉍鉿材料於根管填充顯影之應用 |
黃丞均，鄭宇君，陳錦毅，許富銀，林中魁，李丕耀 |
|
| 2016-01 |
期刊論文
|
奈米及微米粉末之混合添加對真空熱壓製備之Bi0.4Sb1.6Te3化合物熱電特性影響
|
陳子謙, 李丕耀
|
粉體及粉末冶金會刊
|
| 2016-01 |
技術報告
|
具非晶/奈米、奈米/奈米、微米/奈米結構Bi0.4Sb1.6Te3複合材料塊材之粉末冶金製程與熱電特性研究 |
李丕耀 |
|
| 2016- |
期刊論文
|
A High Performance Impedance-based Platform for Evaporation Rate Detection |
Wei-Lung Chou, Pee-Yew Lee, Cheng-You Chen, Yu-Hsin Lin, Yung-Sheng Lin |
J. Vis. Exp.
|
| 2015-12 |
期刊論文
|
Recent Advances in Applications of Droplet Microfluidics |
Wei-Lung Chou, Pee-Yew Lee, Cing-Long Yang, Wen-Ying Huang,Yung-Sheng Lin |
Micromachines
|
| 2015-12 |
研討會論文
|
具微米/奈米結構之碲化鉍基熱電複合材料特性研究 |
李丕耀，徐國洋，黃菁儀，謝慧霖，徐泓璋 |
|
| 2015-11 |
期刊論文
|
Thermoelectric Properties of Alumina-Doped
Bi0.4Sb1.6Te3 Nanocomposites Prepared through
Mechanical Alloying and Vacuum Hot Pressing |
Chung-Kwei Lin, May-Show Chen, Rong-Tan Huang, Yu-Chun Cheng and Pee-Yew Lee |
Energies
|
| 2015-11 |
研討會論文
|
Effect of Micro-and Nanograin Powder Mixing on Thermoelectric Properties in Bi0.4Sb1.6Te3 Vacuum Hot Pressed Compounds |
Yu-Chun Cheng, Pee-Yew Lee |
|
| 2015-11 |
研討會論文
|
機械合金與真空熱壓法製備之Bi0.4Sb1.6Te3熱電材料特性研究
|
陳子謙，黃菁儀，徐泓璋，趙子元，李丕耀
|
|
| 2015-08 |
期刊論文
|
機械合金與真空熱壓法製備之Bi0.4Sb1.6Te3熱電材料特性研究 |
鄭宇君 陳子謙 黃菁儀 徐泓璋 趙子元 李丕耀 |
粉體及粉末冶金會刊
|
| 2015-06 |
期刊論文
|
含非晶質合金相之碲化鉍基奈米熱電複合材料塊材之特性研究 |
李丕耀，鄭宇君，陳子謙，徐國洋，黃菁儀，徐泓璋，趙子元 |
金屬熱處理
|
| 2015-05 |
期刊論文
|
碲化鉍基奈米熱電複合材料塊材之製備與特性研究 |
鄭宇君，陳子謙，徐國洋，黃菁儀，徐泓璋，趙子元，李丕耀 |
粉體及粉末冶金會刊
|
| 2014-12 |
研討會論文
|
含非晶質合金相之碲化鉍基奈米熱電複合材料塊材之特 |
李丕耀，鄭宇君，陳子謙，徐國洋，黃菁儀，徐泓璋，趙子元 |
|
| 2014-11 |
期刊論文
|
Enhancement of the thermoelectric performance in nano-/micro-structured p-type Bi0.4Sb1.6Te3 fabricated by mechanical alloying and vacuum hot pressing |
Pee-Yew Lee, Tzu-Chien Chen, Jing-Yi Huang, Huey-Lin Hsieh, Jason Shian-Ching Jang |
Journal of Alloys and Compounds
|
| 2014-10 |
技術報告
|
含非晶質合金相之碲化鉍基奈米複合材料塊材之製備及其熱電特性研究 |
李丕耀 |
|
| 2014-06 |
期刊論文
|
Thermoelectric properties of nano-/microstructured p-type Bi0.4Sb1.6Te3 powders fabricated by mechanical alloying and vacuum hot pressing |
Pee-Yew Lee, Joey Hao, Tz-Yuan Chao, Jing-Yi Huang, Huey-Lin Hsieh, Hung-Chang Hsu |
Journal of Electroic Materials
|
| 2014-05 |
期刊論文
|
Bi2Te3熱電合金塊材之製備與特性研究 |
李丕耀，徐國洋，黃菁儀，謝慧霖，徐泓璋 |
金屬熱處理
|
| 2014-05 |
期刊論文
|
具微米/奈米結構之Bi-Sb-Te複合材料塊材之製備與熱電特性研究 |
李丕耀，鄭宇君，郝振衣，黃菁儀，徐泓璋 |
粉體及粉末冶金會刊
|
| 2013-12 |
研討會論文
|
Bi2Te3熱電合金塊材之製備與特性研究 |
李丕耀，徐國洋，黃菁儀，謝慧霖，徐泓璋 |
|
| 2013-10 |
研討會論文
|
Thermoelectric properties of nano-/microstructured p-type Bi0.4Sb1.6Te3 powders fabricated by mechanical alloying and vacuum hot pressing |
Pee-Yew Lee, Joey Hao, Tz-Yuan Chao, Jing-Yi Huang, Huey-Lin Hsieh, Hung-Chang Hsu, |
|
| 2013-10 |
研討會論文
|
機械合金法製備之碲化鉍塊材及其熱電性質研究 |
徐國洋，黃菁儀，謝慧霖，徐泓璋，李丕耀 |
|
| 2013-10 |
研討會論文
|
鉍銻碲純元素混合粉末之高能量球磨行為研究 |
陳子謙，黃菁儀，謝慧霖，李丕耀 |
|
| 2013-08 |
期刊論文
|
Bi0.4Sb1.6Te3 熱電複合材料塊材之製備與特性研究 |
李丕耀，郝振衣，趙子元，黃菁儀，謝慧霖 |
金屬熱處理
|
| 2013-05 |
技術報告
|
含非晶質合金相之碲化鉍基奈米複合材料塊材之製備及其熱電特性研究 |
李丕耀 |
|
| 2012-12 |
研討會論文
|
Bi0.4Sb1.6Te3熱電複合材料塊材之製備與特性研究 |
李丕耀，郝振衣，趙子元，黃菁儀，謝慧霖 |
|
| 2012-10 |
研討會論文
|
The corrosion behavior of Ti50Cu28Ni15Sn7 bulk metallic glasses and Mg49Y15Cu36 bulk nanocrystalline alloys formed by vacuum hot pressing technique |
S. T. Chung, Y. W. Lin, P. Y. Lee* and W. T. Tsai |
|
| 2012-10 |
研討會論文
|
鈦鋯鎳銅填料應用於異種合金硬焊之研究
|
謝智鵬，李丕耀 |
|
| 2012-10 |
研討會論文
|
鉍碲純元素混合粉末之機械合金化行為研究 |
趙子元，謝慧霖，李丕耀 |
|
| 2012-08 |
技術報告
|
鈦基金屬玻璃及其複合材料塊材之磨耗特性研究 |
李丕耀 |
|
| 2012-05 |
期刊論文
|
高性能奈米結構熱電材料 |
趙子元，李丕耀 |
粉末冶金會刊
|
| 2011-10 |
研討會論文
|
Preparation of Metallic Glass/Metallic Glass Composites Powder by Mechanical Alloying |
P. Y. Lee |
|
| 2011-08 |
技術報告
|
塊狀金屬玻璃之新製程開發研究 |
李丕耀 |
|
| 2011-08 |
技術報告
|
雙非晶質相金屬玻璃複合材料之粉末冶金製程與特性研究 |
李丕耀 |
|
| 2011-06 |
期刊論文
|
Amorphization Behavior of Ni57Zr20Ti22Ge1 Powders by Mechanical Alloying |
Kai-Chen Kuo, Pee-Yew Lee*, Jai-Yush Yen |
Key Engineering Materials
|
| 2011-02 |
期刊論文
|
原位形成之TiC/鈦基塊狀金屬玻璃複合材料機械性質研究 |
許枝峰，李丕耀，趙子元 |
粉末冶金會刊
|
| 2010-11 |
其他
|
“一種具雙非晶質相之複合材料粉末及塊材的製造方法”， 中華民國發明專利，I332871號公告案，專利期限：2010-2027。 |
李丕耀、鍾松廷、林育瑋 |
|
| 2010-10 |
期刊論文
|
The Oxidation behavior of a Ti50Cu28Ni15Sn7 bulk metallic glass at 400–500 °C |
W. Kai, T. H. Ho, I. F. Jen, P. Y. Lee, Y. M. Yang and T. S. Chin |
Journal of Alloys and Compounds
|
| 2010-10 |
研討會論文
|
原位形成之奈米TiC / Ti50Cu28Ni15Sn7塊狀金屬玻璃基複合材料特性研究 |
許枝峰、李丕耀 |
|
| 2010-08 |
期刊論文
|
Fabrication and corrosion behavior of Ti-based bulk metallic glass composite containing carbon nanotubes |
Chih-Feng Hsu, Wu Kai, Hong-Ming Lin, Chung-Kwei Lin, Pee-Yew Lee |
Journal of Alloys and Compounds
|
| 2010-08 |
期刊論文
|
Microstructure and mechanical properties of mechanically alloyed Al2O3/Ti–Cu–Ni–Sn bulk metallic glass composites prepared by vacuum hot-pressing |
Hong-Ming Lin, Chin-Yi Chen, Chien-Yie Tsay, Chih-Feng Hsu, Pee-Yew Lee |
Journal of Alloys and Compounds
|
| 2010-08 |
研討會論文
|
Formation and Thermoelectric Properties of Zn-Sb Alloys by Mechanical Alloying and Vacuum Hot Pressing |
P. Y. Lee |
|
| 2010-08 |
研討會論文
|
Molecular-Dynamics Calculation of Thermodynamic Melting Point |
P. Y. Lee |
|
| 2010-07 |
技術報告
|
雙非晶質相金屬玻璃複合材料之粉末冶金製程與特性研究(第2年) |
李丕耀 |
|
| 2010- |
研討會論文
|
Corrosion Behavior of Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes |
P. Y. Lee |
|
| 2009-11 |
研討會論文
|
Fabrication and Corrosion Behavior of Ti-Based Bulk Metallic Glass Composites Containing Carbon Particles |
Chih-Feng Hsu, Pee-Yew Lee |
|
| 2009-10 |
研討會論文
|
原位形成之TiC / Ti50Cu28Ni15Sn7金屬玻璃基複合材料粉末特性研究 |
許枝峰、何怡臻，王仁暉，李丕耀 |
|
| 2009-08 |
期刊論文
|
CH4 Addition Effect on Low Temperature Plasma Nitrocarburizing of Duplex Stainless Steel |
Liu-Ho Chiu, Fan-Shiong Chen, Yang-Yu Su, and Pee-Yew Lee, |
NETSU SHORI (熱处理)
|
| 2009-08 |
研討會論文
|
添加稀土元素Gd對Mg-Y-Cu合金之玻璃形成能力與結晶化行為的影響 |
林鴻明，徐麒欽，李丕耀 |
|
| 2009-07 |
期刊論文
|
Predicting the glass-forming-ability of alloys by molecular dynamics simulation: A working example of ti-co bulk metallic glasses |
S.W. Kao, K. C. Yang, S. H. Wang, C. C. Huang, P. Y. Lee, R. T. Huang, T. S. Chin |
Japanese Journal of Applied Physics
|
| 2009-07 |
技術報告
|
雙非晶質相金屬玻璃複合材料之粉末冶金製程與特性研究(第1年) |
李丕耀 |
|
| 2009-03 |
期刊論文
|
Wear Behavior of Mechanically Alloyed Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes |
Chihfeng Hsu, Hongming Lin, and Peeyew Lee |
Journal of Scientific Conference Proceedings
|
| 2008-10 |
期刊論文
|
Characterization of Mechanically Alloyed Ti-based Bulk Metallic Glass Composites Containing Carbon Nanotubes |
Chih-Feng Hsu, Hong-Ming Lin and Pee-Yew Lee* |
Advanced Engineering Materials
|
| 2008-08 |
期刊論文
|
Synthesis and characterization of bulk amorphous/amorphcomposite alloys through powder metallurgy routeous |
Hong-Ming Lin Æ Yu-Wei Lin Æ Pee-Yew Lee* |
Journal of Materials Science
|
| 2008-02 |
期刊論文
|
Microstructure and Mechanical Properties of Vacuum Hot-Pressing SiC/ Ti-Cu-Ni-Sn Bulk Metallic Glass Composites |
李丕耀 |
Materials Science and Engineering A
|
| 2008-02 |
期刊論文
|
The corrosion behavior of mechanically alloyed Cu–Zr–Ti bulk metallic glasses |
H.M. Lin, J.K. Wu, C.C. Wang, P.Y. Lee⁎ |
Materials Letters
|
| 2007-12 |
期刊論文
|
Preparation and Properties of Ti50Cu28Ni15Sn7 Bulk Metallic Glass by Vacuum Hot Pressing |
李丕耀 |
Metallurgical & Materials Transactions A
|
| 2007-06 |
期刊論文
|
Mechanically Alloyed Tungsten Carbide Particles/Ti50Cu28Ni15Sn7 Glassy Alloy Matrix Composites |
李丕耀 |
Mater. Sci. Eng. A
|
| 2006-05 |
期刊論文
|
Mg-Y-Cu Bulk Metallic Glass Prepared by Mechanical Alloying and Vacuum Hot-Pressing |
李丕耀 |
Intermetallics
|
| 2004-09 |
期刊論文
|
Preparation and thermal stability of mechanically alloyed Ni–Zr–Ti–Y amorphous powders |
李丕耀* |
Intermetallics
|
| 2004-07 |
期刊論文
|
Preparation and Thermal Stability of Mechanically Alloyed Amorphous Ni-Zr-Ti-Si Composites |
李丕耀* |
Mater. Sci. Eng.A
|
Chief educational attainment