| 出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
| 2023-10 |
期刊論文
|
Effect of the Spatial Arrangement of Floating Builds
with Minimum Support on the Microstructural and Mechanical Characteristics of Electron Beam Additively Manufactured Biomedical Ti–6Al–4V Alloys |
Yi-Cheng Chen, Ping-Ho Chen, Meng-Hsiu Tsai and Shih-Fu Ou1 |
3D PRINTING AND ADDITIVE MANUFACTURING
|
| 2023-01 |
期刊論文
|
Hot pressing of DCPD-coated Mg-Zn-Ca powder: Corrosion behavior observed using liquid cell transmission electron microscopy |
Meng-Hsiu Tsai, Chia-Ming Yang, Yen-Hsi Chen, In-Gann Chen, Chiu-Feng Lin, Chun-Chieh Tseng |
Materials & Design
|
| 2022-11 |
期刊論文
|
Observation of Morphology and Compositional Changes of Magnesium Alloy Using Liquid Cell TEM |
Chia-Ming Yang, Yen-Hsi Chen, Meng-Hsiu Tsai, Ben Bang-Yu Hsu, Wen-Ta Tsai, Chiu-Feng Lin, Chun-Chieh Tseng, In-Gann Chen |
Journal of Materials Research and Technology
|
| 2022-11 |
研討會論文
|
以有限元素分析探討積層製造樣品之機械性質與破壞行為 |
楊佳明、蔡孟修、鄭朝勇、洪宇萱、伏和中*、陳引幹* |
|
| 2022-11 |
研討會論文
|
以選擇性雷射熔融積層製造AlCoCrMoNbNiW耐火高熵合金-降低裂紋生成機制討論 |
湯立德、莊宇傑、伏和中、蔡孟修* |
|
| 2022-11 |
研討會論文
|
以粒子力學探討微粒子珠擊製程參數對於微粒子與被加工材料相互行為影響 |
高鏡琳、洪筠捷、簡求奮、伏和中、蔡孟修* |
|
| 2022-11 |
研討會論文
|
螺紋式異形水路設計與分析模擬 |
陳柏宇、伏和中、蔡孟修* |
|
| 2022-11 |
研討會論文
|
選擇性雷射積層製造多孔鎳鈦機械性質研究 |
賴建庭、陳柏豪、伏和中、蔡孟修* |
|
| 2022-11 |
研討會論文
|
階梯式透氣金屬雷射積層製造及應用研究 |
邱俊瑋、賴奕霖、伏和中、蔡孟修* |
|
| 2022-10 |
期刊論文
|
Microstructure of NiTi superelastic alloy manufactured by Selective Laser Melting |
E. Nigito, F. Diemer, S. Husson, S.F. Ou, M.H. Tsai, F. R ́ezaï-Aria |
Materials Letters
|
| 2022-10 |
期刊論文
|
Vickers Hardness Value Test via Multi-Task Learning Convolutional Neural Networks and Image Augmentation |
Wan-Shu Cheng, Guan-Ying Chen, Xin-Yen Shih, Mahmoud Elsisi, Meng-Hsiu Tsai and Hong-Jie Dai
|
applied science
|
| 2021-12 |
期刊論文
|
Finite Element Analysis on Initial Crack Site of Porous
Structure Fabricated by Electron Beam Additive Manufacturing |
Meng-Hsiu Tsai, Chia-Ming Yang, Yu-Xuan Hung, Chao-Yong Jheng, Yen-Ju Chen, Ho-Chung Fu and In-Gann Chen, |
materials
|
| 2021-12 |
研討會論文
|
探討球化熱處理對於鈦-6鋁-4釩電子束積層製造機械性質之影響
|
許灝，湯立德，伏和中，蔡孟修
|
|
| 2021-12 |
研討會論文
|
異形水路模具模擬分析與雷射積層製造製程研究 |
許哲銘、賴奕霖¬、蔡孟修 |
|
| 2021-11 |
研討會論文
|
Selective Laser Melting of AlCoCrNbNiW High Entropy Alloy: The Microstructure and High Temperature Mechanical Properties Study
|
M.H. Tsai, C.P. Cheng, Y.C. Chuang and H.C. Fu
|
|
| 2021-10 |
研討會論文
|
Comparing plasma wire gas atomization and electrode induction gas atomization processes for biomaterial Ti6Al4V powder
|
Ying-Zhi Wu, Meng-Hsiu. Tsai*
|
|
| 2021-05 |
研討會論文
|
Selective Laser Melting of Nitinol: Effects of laser power, scan speed, phase transformation and shape memory ability
|
M.H. Tsai, Bo-Hao Chen, Yi-Cheng Chen, Tai-I Hsu, S.F. Ou |
|
| 2020-11 |
研討會論文
|
AlBCoCrCNiTaW多元合金微觀結構與高溫性質之研究 |
莊宇傑、吳椲葶、伏和中、蔡孟修 |
|
| 2020-11 |
研討會論文
|
以機械合金法研磨不同粒徑混摻鈦合金屑料之研究 |
吳英誌、鍾育庭、許太乙、蔡孟修* |
|
| 2020-11 |
研討會論文
|
探討選區雷射積層製程對鎳鈦記憶合金成份與相變化的影響 |
陳柏豪，*蔡孟修，伏和中，歐士輔，許太乙 |
|
| 2020-11 |
研討會論文
|
雷射積層製造 420 不銹鋼添加發泡劑在不同能量密度下的孔隙率及機械性質之研究
|
賴奕霖、伏和中、蔡孟修* |
|
| 2020-03 |
期刊論文
|
Effect of gradient energy density on the microstructure and mechanical properties of Ti6Al4V fabricated by selective electron beam additive manufacture |
T.I Hsu, Yu-Ting Jhong and M.H. Tsai＊ |
Materials
|
| 2019-08 |
期刊論文
|
Generating lap joints via friction stir spot welding on DP780 steel |
T.I Hsu and M.H. Tsai |
Journal of Visualized Experiments
|
| 2019-02 |
期刊論文
|
Microstructure and mechanical properties of Ti nitride/Ni metal-based composites fabricated by reactive sintering |
Yi-Cheng Chen, Fang-Yu Fan, Meng-Hsiu Tsai, Chien-Hui Wu, Shyi-Tien Chen, Shih-Fu Ou,∗ |
Ceramics International
|
| 2018-09 |
期刊論文
|
Nitinol powders generate from Plasma Rotation Electrode Process provide clean powder for biomedical devices used with suitable size, spheroid surface and pure composition |
T.I Hsu, C.M. Wei, L.D. Wu, Y.P. Li, A. Chiba and M.H. Tsai |
Scientific Reports
|
| 2018-08 |
期刊論文
|
以不同能量密度在選擇性電子束積層製造製程中
對鈦-6鋁-4釩顯微組織的影響
|
蔡孟俢，鍾育庭，杜哲光，許太乙 |
粉體及粉末冶金會刊
|
| 2018-05 |
期刊論文
|
Manufacturing and characterization of NiTi alloy with functional properties by selective laser melting |
S.F.Ou, B.Y. Peng, Y.C. Chen and M.H. Tsai |
metals
|
| 2018-04 |
期刊論文
|
Resistance and Friction Spot Welding of Dual Phase (DP 780)-A Comparative Study |
T.I Hsu, L.D. Wu and M.H. Tsai |
The International Journal of Advanced Manufacturing Technology
|
| 2017-11 |
研討會論文
|
Porous Spiral Cage of biomedical Ti6Al4V alloy fabricated by electron beam melting |
M.H. Tsai* and T.I Hsu |
|
| 2016-07 |
期刊論文
|
高純淨粉體的製造 |
蔡孟修 |
科學發展
|
| 2016-06 |
期刊論文
|
積層製造技術於醫療植入物之研究 |
蔡孟修、郭哲男、許富銓、王鍏晴 |
機電現場技術雙月刊
|
| 2016-04 |
研討會論文
|
Nitinol Powder Manufacture By Plasma Rotation Electrode Process |
M. H. Tsai1*, L. T. Wu, and A. Chiba |
|
| 2014-03 |
期刊論文
|
Distribution of diamond grains in fixed abrasive wire sawing process |
C.H. Chung, G.D. Tsay and M.H. Tsai |
The International Journal of Advanced Manufacturing Technology
|
主要學歷