| 出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
| 2023-04 |
期刊論文
|
Optimization of compression molding for double-concave lenses |
Cheng‑Hsien Wu, Chun‑Yu Liu |
The International Journal of Advanced Manufacturing Technology
|
| 2022-06 |
期刊論文
|
Applying Plastic-Metal Joining and Automatic Stamping to Inserted Injection Molding Processes |
Yu-Chi Shih, Meng-Ting Wu, Cheng-Hsien Wu |
Diffusion and Defect Data. Pt A Defect and Diffusion Forum
|
| 2022-06 |
期刊論文
|
Deep learning‑based optimization using a limited number of experiments for roll‑to‑roll UV embossing |
Meng‑Ting Wu, Ming‑You Wu, Cheng‑Hsien Wu |
The International Journal of Advanced Manufacturing Technology
|
| 2021-12 |
研討會論文
|
Applying plastic-metal joining and automatic stamping to inserted injection molding processes |
Yu-Chi Shih, Meng-Ting Wu and Cheng-Hsien Wu |
|
| 2021-10 |
期刊論文
|
The Use of Roll-to-Plate UV-Curing Embossing to Produce a Composite Light Guide Plate |
Cheng-Hsien Wu, Yu-Cheng Liou |
Microsystem Technologies
|
| 2020-12 |
研討會論文
|
光固化卷對卷滾壓應用於導光膜之製程最佳化 |
吳銘侑、吳政憲、鄭宗杰 |
|
| 2020-12 |
研討會論文
|
應用三維模內裝飾技術之薄膜成形性研究 |
李季桓、吳政憲、林威佑 |
|
| 2020-10 |
期刊論文
|
The use of 3D in‐mold decoration technology to form a film with printed circuits |
Cheng‐Hsien Wu, Ji‐Huan Li |
Polymer Engineering and Science
|
| 2020-03 |
期刊論文
|
Design and application of a hybrid alignment platform for a double-sided hot embossing process |
吳政憲，邱正豪，陳鈺軒;Cheng-Hsien Wu, Cheng-Hao Chiu, Yu-Hsuan Chen |
Microsystem Technologies
|
| 2019-01 |
期刊論文
|
Designing and Measuring the Hot-Embossing Machine with Hybrid Positioning Functions |
吳政憲，邱正豪;Cheng-Hsien Wu, Cheng-Hao Chiu |
MATEC Web of Conferences
|
| 2018-11 |
研討會論文
|
應用滾對板UV光固化成型於複合式導光板之設計分析與製造 |
吳政憲、劉育承、施鈺麒 |
|
| 2018-11 |
研討會論文
|
複合式二次光學透鏡結構對於光學效益影響之研究 |
楊炳筠、黃子緯、吳政憲 |
|
| 2018-05 |
研討會論文
|
Designing and Measuring the Hot-Embossing Machine with Hybrid Positioning Functions |
Cheng-Hsien Wu and Cheng-Hao Chiu |
|
| 2017-12 |
研討會論文
|
紫外光固化輥對板技術應用於雙面微結構成形及其光學特性探討 |
劉育承、楊炳筠、吳政憲 |
|
| 2017-07 |
專書
|
機械製造 |
傅光華、吳坤齡、吳政憲、胡瑞峰、簡文通、蘇嘉祥 |
高立圖書
|
| 2016-10 |
期刊論文
|
Mechanism Design with Rotational and Positioning Calibrations for Double-sided Structure Replication |
Cheng-Hsien Wu, Cheng-Hao Chiu |
Microsystem Technologies
|
| 2014-10 |
研討會論文
|
Applying UV Roll-to-Roll Processes to Produce the Concentrated Films of a Solar Energy System |
Cheng-Hsien Wu and Wei-Ting Chen |
|
| 2014-07 |
專書
|
模具概論 |
吳政憲、許文政、張致遠、歐士輔 |
社團法人中華民國模具技術發展學會
|
| 2012-04 |
期刊論文
|
Development of a Double-Sided Micro Lens Array for Micro Laser Projector Application |
Fong-Zhi CHEN,Cheng-Huan CHEN,Cheng-Hsien WU,Ching-Hsiang KUO,Jyh-Rou SZE,Wei-Yao HSU and Yuan-Chieh CHENG |
OPTICAL REVIEW
|
| 2011-10 |
研討會論文
|
Effects of Injection Molding Parameters on the Weldline Strength of Thin-Wall Fiber-Reinforced Thermoplastics |
Cheng-Hsien Wu and Ming-Yu Lin |
|
| 2011-10 |
研討會論文
|
Research and Development about Error Analysis of Hot-Embossing for Double-Sided Microstructures |
Cheng-Hsien Wu and Cheng-Hao Chiu |
|
| 2011-04 |
期刊論文
|
Hot Embossing with Two-Axis Micro-Positioning for Double-Sided Microstructures |
Cheng-Hsien Wu and Cheng-Hao Chiu |
Advanced Science Letters
|
| 2010-10 |
期刊論文
|
Development of Double Side Micro Lens Array for Micro Laser Projector Application |
Fong-Zhi Chen, Cheng-Huan Chen, Cheng-Hsien Wu, Ching-Hsiang Kuo, Jyh-Rou Sze, Wei-Yao Hsu, Yuan-Chieh Cheng |
16th International Conference on Microoptics
|
| 2010-07 |
期刊論文
|
Motion Analysis of a Robotic Wheelchair on Climbing Winding Stairs in an Open Mode |
Chun-Ta Chen, Chih-Jer Lin, Chiang-Ho Cheng, Hoang-Vuong Pham and Yu-Cheng Chang |
INDIN2010
|
| 2010-02 |
研討會論文
|
Experiment and analysis of hot-embossing on 3D micro-holes |
Cheng-Hsien Wu and Chin-Yu Liu |
|
| 2009-06 |
期刊論文
|
Parametric Study of Hot Embossing on Micro-Holes |
Cheng Hsien Wu*, Chen Hao Hung, Ya Zhen Hu |
Advanced Materials Research
|
| 2009-02 |
研討會論文
|
Closed-Die Hot Embossing for Fabrication of an LCD Light Guide Plate |
Cheng-Hsien Wu, Chu-Hung Cheng, Ching-Hsiang Kuo and Fong-Zhi Chen |
|
| 2008-10 |
研討會論文
|
Effects of Injection Molding Parameters on the Weldline Strength of Thin-Wall Fiber-Reinforced Thermoplastics |
Cheng-Hsien Wu and Ming-Yu Lin |
|
| 2008-05 |
期刊論文
|
The study of injection/compression liquid composite molding |
吳政憲*,潘俞瑞 |
Journal of Materials Processing Technology
|
| 2008-03 |
期刊論文
|
Fabrication of an LCD light guide plate using closed-die hot embossing |
吳政憲, 盧建宏 |
Journal of Micromechanics and Microengineering
|
| 2007-10 |
期刊論文
|
Influence of lubrication type and process conditions on milling performance |
吳政憲*,簡志賢 |
Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture
|
| 2007-10 |
期刊論文
|
Parametric study of injection molding and hot embossing in polymer microfabrication |
吳政憲 |
Journal of Mechanical Science and Technology
|
| 2007-05 |
期刊論文
|
The Influence of Cavity Deformation on Shrinkage and Warpage of an Injection Molded Part |
吳政憲 |
The International Journal of Advanced Manufacturing Technology
|
| 2007-03 |
期刊論文
|
Flow Analysis of Micro-Channel in Injection Molding |
吳政憲 |
Journal of Polymer Engineering
|
| 2006-04 |
期刊論文
|
Thermal analysis and compensation of a double-column machining centre |
吳政憲 |
Proc. IMechE, Part B: J. Engineering Manufacture
|
| 2006-01 |
期刊論文
|
Effects of preload on the thermal behavior of an oil/air lubricated spindle |
Cheng-Hsien Wu*, Yu-Tai Kung |
Materials Science Forum
|
| 2006-01 |
期刊論文
|
Injection Molding and Injection Compression Molding of Three-Beam Grating of DVD Pickup Lens |
Cheng-Hsien Wu*, Wei-Shiu Chen |
Sensors & Actuators: A. Physical
|
| 2005-10 |
期刊論文
|
Effects of Geometry and Injection-Molding Parameters on Weld-Line Strength |
吳政憲 |
POLYMER ENGINEERING AND SCIENCE
|
| 2005-04 |
期刊論文
|
A parametric study on oil/air lubrication of a high-speed spindle |
吳政憲*, 龔佑泰 |
Precision Engineering
|
| 2004-12 |
研討會論文
|
Fabrication of injection molded diffuser micropumps |
吳政憲*, 徐瑋傑 |
|
| 2004-12 |
研討會論文
|
Injection molding of grating optical elements with microfeatures |
吳政憲*, 陳緯旭 |
|
| 2003-12 |
期刊論文
|
Thermal analysis for the feed drive system of a CNC machine center |
吳政憲*, 龔佑泰 |
International Journal of Machine Tools and Manufacture
|
| 2003-03 |
期刊論文
|
Optimization of Wedge-Shaped Parts for InjectionMolding and Injection Compression Molding |
吳政憲*, 蘇義豊 |
International Communications in Heat and Mass Transfer
|
主要學歷