研究人才詳細資料
其他績效
| 出版年月 | 著作類別 | 著作名稱 | 作者 | 收錄出處 |
|---|---|---|---|---|
| 2023-08 | 研討會論文 | Investigation of Hydrophobic Microstructure of Stainless Steel Fabricated by Fine Wire-EDM Processes Associated with Low-Temperature Baking | Albert Wen-Jeng Hsue, Zih-Chin Su (IEEE ICMAE-2023) | |
| 2022-12 | 研討會論文 | 線切割放電加工與低溫烘烤製備不銹鋼疏水性表面微結構之研究 | 蘇子欽、許文政 | |
| 2022-11 | 研討會論文 | A Rotating EDM Electrode with A String-Beads Mechanism for the Trimming of Mold‘s Conformal Cooling Channels by Additive Manufacture | Albert W.J. Hsue, Yi-Da Pan (IC3MT-2022 4th International Conference on Machining, Materials and Mechanical Techn.) | |
| 2022-11 | 研討會論文 | Fabrication of Micro Mold-Cavity by Hybrid Electrochemical Machining Processes, Proceedings of INSECT 2022, Tokyo, Japan | Albert Wen-Jeng Hsue, Zih-Yuan Huang | |
| 2022-10 | 期刊論文 | Multi-pass EDM process planning for the surface treatment of powder-bed-fusion AM CORRAX mold steel | Albert W.J. Hsue, Chieh-Chih Liao, and Li-Wei Lu | Journal of Physics: Conference Series (J. Phys.: Conf. Ser. 2345 012020),2022 |
| 2022-09 | 研討會論文 | Comparison of EDM Trimming with Ultrasonic Assisted Milling (UAM) for the Permeability Mold Steel Fabricated by SLM-AM Technology | Albert Wen-Jeng Hsue, Li-Wei Lu, Chien-Lun Li | |
| 2022-03 | 期刊論文 | Introduction of Taiwan Society of Electrical Machining Engineering - (A Review) | Hai-Ping Tsui, Albert Wen-Jeng Hsue, Jung-Chou Hung |
國際電加工期刊, 27(1), 2022 pp.1-7 International Journal of Electrical Machining, 27(1) 2022, pp.1-7 |
| 2022-01 | 期刊論文 | Deionized Water Electrochemical Machining Hybridized with Alumina Powder Polishing for Microcavity of M-333 Mold Steel | Albert Wen-Jeng Hsue , Zih-Yuan Huang |
製程學刊 Processes 2022, 10(152) PP.1-17; https://doi.org/10.3390/pr10010152 |
| 2021-12 | 研討會論文 | 從自駕車轉向角之差分值闡釋深度學習模型影像導航之機制 | 林鼎鈞、林冠傑、許文政 | |
| 2021-12 | 研討會論文 | 放電加工對積層透氣模具鋼之表面處理與超聲輔助銑削法之比較 | 呂笠瑋、許文政、李健綸 | |
| 2021-12 | 研討會論文 | 放電加工修整金屬積層製備模具內流道表面之新型串珠機構 | 許文政、潘奕達、楊尚軒 | |
| 2021-11 | 研討會論文 | Machining Removal Rate and Worn-Out for the Mesoscale Mold of Tungsten Carbide through Rotary Ultrasonic-Assisted EDM Milling | Albert Wen-Jeng Hsue, Tsun-Ming Lin, Wei-Chi Fu (WCMNM 2021) | |
| 2021-10 | 期刊論文 | A novel string-bead EDM mechanism for dressing of the conformal cooling channel fabricated by the SLM-additive manufacture | Albert Wen-Jeng Hsue,Yi-Da Pan and Li-Wei Lu | Journal of Physics: Conference Series (IOP Publishing) |
| 2021-01 | 期刊論文 | Dual-Axial Ultrasonic Assisted Wire-EDM Process with Vibration Exerted through the Upper Guide | Albert Wen-Jeng Hsue, Zih-Siou Su, and Yang-Lei Lin | Procedia CIRP 95, 319-324 DOI:doi.org/10.1016/j.procir.2020.02.262. |
| 2020-12 | 期刊論文 | Torque Controlled Mini-Screwdriver Station with A SCARA Robot and A Machine-Vision Guidance | Albert Wen-Jeng Hsue, Chih-Fan Tsai | IEEE Xplore (IEEE Access) |
| 2020-11 | 研討會論文 | 金屬積層模具表面處理之放電加工道次規畫研究-以AM CORRAX為例 | 廖建棋,許文政,呂笠瑋 | |
| 2020-11 | 研討會論文 | 雙軸向振動輔助線割放電加工與穩定性監控之研究(獲頒 CSME-37研討會暨學生論文競賽「佳作獎」) | 蘇子修,許文政,傅威智 | |
| 2019-12 | 期刊論文 | 高厚度件之超音波振動輔助線割放電加工特性與放電波列分析(I) | 許文政、林洋磊、蘇子修 |
台灣電加工學刊 Journal of Taiwan Society of Electrical Machining Engineers |
| 2019-11 | 研討會論文 | The Stability and Accuracy of Wire-EDM Process through Circularly Ultrasonic Vibration Modules, Proceedings of Japan Society for Precision Engineering | Albert W.-J. Hsue, Y.-L. Lin, and Z.-S. Su | |
| 2018-11 | 研討會論文 | Performance and Wear of Micro Diamond Tools for Hybrid Micro Electrical Discharging with Grinding Processes | Albert Wen-Jeng Hsue, Yu-Fu Chang | |
| 2018-11 | 研討會論文 | 漸進修整刀具電極之機構與達成超高精度之放電銑削加工法 | 許文政, 潘奕達, 彭林賢, 粘世智 | |
| 2018-07 | 期刊論文 | A novel flexible tool with rotary ultrasonic spindle for fine grinding of tungsten carbide | Albert Wen-Jeng Hsue, Yi-Zhong Zheng | MATEC Web of Conferences |
| 2018-05 | 期刊論文 | Pulse Efficiency and Gap Status of Rotary Ultrasonic Assisted Electrical Discharge Machining and EDM Milling | Albert Wen-Jeng Hsue, Tian-June Hao, Tsung-Ming Lin | Procedia CIRP 68(2018),DOI: 10.1016/j.procir.2017.12.155 (SCIE) |
| 2017-05 | 研討會論文 | An Automatic Optical Inspection of Plastic Parts’ Step-Error and In-plane Deviation Associated with a Novel Mechanism and Laser Module | Albert Wen-Jeng Hsue, Sam Chih-Jen Shen | |
| 2017-03 | 研討會論文 | Micro Molding with Electro-Chemical Machining in Pure Water and in Mixed Alumina Powder | Albert Wen-Jeng Hsue, Zih-Yuan Huang | |
| 2017-03 | 研討會論文 | Tool wear and Gap status of rotary ultrasonic assisted Electrical discharge machining | Albert Wen-Jeng Hsue, and Tsung-Ming Lin | |
| 2016-12 | 研討會論文 | Discharge Coating on Mold Steel Surface through Wire-EDM by Nickel-coated Copper Wire and Conventional Brass Wire | Albert Wen-Jeng Hsue, Shen-Shiun Chiu | |
| 2016-12 | 研討會論文 | 泛用型3x3陣列撓性夾具之夾持穩固度分析與驗證 | 許文政,林彥廷,曾一中 | |
| 2016-12 | 研討會論文 | 鍍鎳銅線及黃銅線對線切割放電加工之表面披覆與機械性能比較 | 許文政,邱聖軒,林洋磊 | |
| 2016-05 | 研討會論文 | High Precision Electrical Discharge Machining and EDM Milling Processes with an On-Line Dressing Tool | Albert W.-J. Hsue, S.-C. Nian, L.-S. Peng | |
| 2016-04 | 期刊論文 | Toward Synchronized Hybrid Micro-EDM Grinding of Micro-Holes Using Helical Taper Tools Formed by Ni-Co/ Diamond Co-deposition | Albert Wen-Jeng Hsue, Yu-Fu Chang |
材料處理技術期刊 Journal of Materials Processing Technology, V234, pp.368-382, April 2016, doi:10.1016/j.jmatprotec.2016.04.009 |
| 2016-03 | 期刊論文 | Comparison on gas bubble and pulse trains of deep-cavity electrical discharge machining with/without rotary ultrasonic assistance | Albert Wen-Jeng Hsue, Tian-Jun Hao |
doi:10.1007/s00170-016-8557-9 國際先進製造技術期刊 The International Journal of Advanced Manufacturing Technology; First online 19 March, (2016), (doi:10.1007/s00170-016-8557-9) |
| 2015-11 | 研討會論文 | Hybrid Micro ECM-Milling with Deionized Water and Al2O3 Powder and Simultaneously Polishing for Micro-Mold Cavity | Albert Wen-Jeng Hsue, Zih-Yuan Huang | |
| 2014-11 | 研討會論文 | Co-deposition of Ni-Co / Diamond Micro-Tools and Its Application to Hybrid EDM-Grinding for Precision Micro-Holes | Albert W.-J. Hsue, Y.-F. Chang | |
| 2014-10 | 研討會論文 | Ultrasonic Assisted High Efficiency Electrical Discharge Machining and its Gap Status Viewed from Spatial-Time Relationship | Albert W.-J. Hsue, C.-F. Wang | |
| 2013-09 | 研討會論文 | Analysis and Tools Design of Synchronized Hybrid μEDM Grinding for Precision Micro Machining | Albert Wen-Jeng Hsue*, Chia-Hung Chung, Jung-Chou Hung | |
| 2013-04 | 期刊論文 | Effective Pulses Discriminator and Control Strategy for High Speed Direct-Drive Electrical Discharge Machining | Albert W.-J. Hsue*, C.-H. Chung, M.-T. Yan |
中國機械工程學刊, V34(2): 167-176, 2013 Journal of the Chinese Society of Mechanical Engineers, V34(2): 167-176, 2013 |
| 2013-03 | 期刊論文 | EDM surface characteristics and shape recovery ability of Ti35.5Ni48.5Zr16 and Ni60Al24.5Fe15.5 ternary shape memory alloys | S. F. Hsieh, Albert W. J. Hsue, S. L. Chen, M. H. Lin, K. L. Ou |
合金與化合物期刊 V571, 63-68, 2013. Journal of Alloys and Compounds V571, 63-68, 2013. |
| 2012-10 | 期刊論文 | Removal Analysis for multi-axial WEDM and Ultrasonic Assisted WEDG Processes with Augmented Rotational Axes | Albert Wen-Jeng Hsue, Jun-Jie Wang, Chia-Hun Chang, Yin Chuan | Advanced Materials Research |
| 2012-08 | 期刊論文 | Fabrication of mass micro-holes using the hybrid precision extruded-wax electroforming and micro-EDM processes | S.-T. Chen, Albert W.-J. Hsue* and T.-S. Luo |
中國機械工程學刊 V33 (4): 349-356, 2012. Journal of the Chinese Society of Mechanical Engineers, V33(4): 349-356, 2012. |
| 2012-06 | 研討會論文 | Milling Tool of Micro-EDM by Ultrasonic Assisted Multi-axial Wire Electrical Discharge Grinding Processes | Albert Wen-Jeng Hsue, Jun-Jie Wang, Chia-Hun Chang | |
| 2012-05 | 期刊論文 | A NEWADAPTIVE CONTROL FORPERIODIC TRACKING/ DISTURBANCE REJECTION (DOI: 10.1002/asjc.409) | C-H Chung*, M-S Chen, Albert W-J Hsue |
亞洲控制期刊, V14(3): 827-834, 2012. Asian Journal of Control, V14(3): 827-834, 2012. |
| 2012-01 | 期刊論文 | Sub-Wavelength Structures (SWSs) on the PC Film for Antireflection by Using Gas-Assisted Hot Embossing | Fang-Sung Cheng, Albert Wen-Jeng Hsue | Advanced Science Letters |
| 2011-01 | 期刊論文 | Variable Structure Based Robust Backstepping Controller Design for Nonlinear Systems | C.-C. Peng, Albert W.-J. Hsue and C.-L. Chen |
非線性動力學期刊, V.63, pp.253-262, 2011 Nonlinear Dynamics, V.63, pp.253-262, 2011 |
| 2010-04 | 研討會論文 | Implementation and Analysis of Multi-Axial Thin Wire Electrical Discharge Machining for Meso-Scale/Micro Parts | Albert W.-J. Hsue, and W.-C. Wei, Yin Chuan | |
| 2010-04 | 研討會論文 | The research of multi-wires EDG technology in the manufacture of micro-electrode | Yin Chuan, Jack C. Y. Lin, Albert W. J. Hsue | |
| 2010-04 | 研討會論文 | Ultrasonic Assisted Multi-Axial Wire Electrical Discharge Grinding (WEDG) Processes for Micro-EDM and Cylindrical-WEDM | Albert W.-J. Hsue, and W.-C. Wei, Yin Chuan | |
| 2010-01 | 期刊論文 | Novel Jump Control for Debris Processes of Electrical Discharge Machining with Direct-Drive Spindle | Albert W.J. Hsue*, C.H. Chung | Journal of Advanced Materials Research |
| 2009-07 | 研討會論文 | Control Strategy for High Speed Electrical Discharge Machining (Die-sinking EDM) Equipped with Linear Motor | Albert W.-J. Hsue, and C.-H. Chung | |
| 2009-06 | 研討會論文 | Augmented Cylindrical Axis to Macro Wire Electrical Discharge Machining (WEDM) and WEDG Processes | Albert W.J. Hsue, W.-C. Wei | |
| 2007-11 | 期刊論文 | A Study of Cutting Temperatures in Turning of Glass Fiber Reinforced Plastics Materials | C.-S. Chang, L.-R. Hwang, Albert W.-J. Hsue* | Journal of Material Science Forum |
| 2007-11 | 期刊論文 | Improvement of Wire-EDM Finishing Processes through Adaptive Fuzzy Logic Control Algorithm | Albert Wen-Jeng Hsue | Journal of Material Science Forum |
| 2007-11 | 研討會論文 | Fundamental Analysis and Implementation of Wire Electrical Discharge Machining Processes with Augmented Cylindrical Axis | Albert Wen-Jeng Hsue*, Wen-Cheng Wei | |
| 2007-10 | 期刊論文 | Comparison on Linear Synchronous Motors and Conventional Rotary Motors Driven Wire-EDM Processes | Albert W.-J. Hsue, M.-T. Yan, and S.-H. Ke |
材料處理技術期刊,V.192-193, 478-485, 2007 Journal of Materials Processing Technology,V.192-193, 478-485, 2007. |
| 2007-04 | 研討會論文 | Design of Linear Motors Driven Electrical Discharge Machine Supported with Granite Structure | Albert W.-J. Hsue*, C.-C. Chen, and M.-T. Yan | |
| 2006-07 | 研討會論文 | Friction Compensation of a Retrofit Milling Machine through a Fuzzy Logic Controller combined with Neural Network-based Feedforward Control | M.T. Yan, Albert W.-J. Hsue, Y.L. Huang | |
| 2005-06 | 研討會論文 | Adaptive Fuzzy Control for Finishing Improvement of Wire-EDM through Gap-Width Monitoring | Albert W-J Hsue | |
| 2004-06 | 期刊論文 | Feedback Control of WEDM Process for Improving Its Removal Dynamics and Finishing Quality | Albert Wen-Jeng Hsue | Int. Journal for Manufacturing Science and Technology |
| 2004-04 | 期刊論文 | Removal analysis of WEDM’s tapering process and its application to generation of precise conjugate surface | Albert Wen-Jeng Hsue, Shin-Cheng Su |
材料處理技術期刊, V149, pp.117-123, 2004. Journal of Materials Processing Technology, V149, pp.117-123, 2004. |
| 2004-04 | 研討會論文 | Removal analysis of WEDM’s tapering process and its application to generation of precise conjugate surface | Albert Wen-Jeng Hsue, Shin-Cheng Su | |
| 2003-12 | 研討會論文 | Generalized Material Removal Analysis of CO2 Laser and Application to Engraving of Platelet Work | Albert W-J Hsue, S-C Su | |
| 2002-12 | 研討會論文 | 適應線切割放電加工負荷之錐度與曲面精度控制 | 許文政 | |
| 2001-05 | 研討會論文 | A Control Strategy for Finish-Cut of Wire-EDM Based on A Material Removal Model | 許文政*,廖運炫 | |
| 2000-08 | 期刊論文 | 線切割放電加工之角隅誤差分析 | 許文政 | 機械月刊 |
| 2000-05 | 研討會論文 | Modeling of Wire Electrical Discharge Machining Process by an Adaptive Fuzzy Logic System | W. J. Hsue*, Y. S. Liao | |
| 2000-01 | 期刊論文 | A Study of Corner Control Strategy of Wire-EDM Based on Quantitative MRR Analysis | W-J Hsue (Albert), Y-S Liao, S-S- Lu |
電加工國際學刊, No.4, pp.33-39, 2000. International Journal of Electrical Machining, No.4, pp.33-39, 2000. |
| 1999-08 | 期刊論文 | Fundamental Geometry Analysis of Wire Electrical Discharge Machining in Corner Cutting | W.-J. Hsue (Albert), Y.-S. Liao, S.-S. Lu |
國際工具機與製造期刊, V.39(4) pp.651-667, 1999. International Journal of Machine Tools & Manufacture, V.39(4) pp.651-667, 1999. |
| 1999-05 | 期刊論文 | Determination of Finish-Cutting Operation Number and Machining-Parameters Setting in Wire Electrical Discharge Machining | J.-T. Huang, Y.-S. Liao, and W.-J. Hsue (Albert) |
材料處技術期刊,V87(1-3), pp.69-81, 1999. Journal of Materials Processing Technology,V87(1-3), pp.69-81, 1999. |