| 出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
| 2019-12 |
期刊論文
|
Hybrid Stress Analysis of a Near-Surface
Circular Hole in Finite Structures |
Abdullah Alshaya, Shiang-Jiun Lin |
Journal of Mechanical Engineering Science
|
| 2019-09 |
專書論文
|
The Effect of Residual Stress on Aluminum Strength Using Thermoelastic Stress Analysis |
Wei-Cheng Shen, Shiang-Jiun Lin, Yan-Bing Huang, Xue-Lin Ji, Wei-Yu Zeng |
Residual Stress, Thermomechanics & Infrared Imaging and Inverse Problems
|
| 2018-12 |
研討會論文
|
Adiabaticity of Thermoelastic Measurements for an Aluminum Material Based on Applying Cyclic Loading |
X.-L. Ji, S.-J. Lin, Y.-B. Huang and W.-Y. Zeng |
|
| 2018-12 |
研討會論文
|
Determination of Stress Field for Polymer Material using Thermoelasticity |
W.-Y. Zeng, S.-J. Lin, Y.-B. Huang and X.-L. Ji |
|
| 2017-12 |
研討會論文
|
Monitoring Residual Stress Based on Using Thermoelastic Stress Analysis |
Y.-R. Hsieh, S.-J. Lin, M.-S. Wang, W.-C. Shen, and X.-L. Ji |
|
| 2017-11 |
研討會論文
|
Determination of Residual stress using Thermoelastic Measurements |
Shiang-Jiun Lin, You-Ru Hsieh, Mao-Sheng Wang, Yung-Cheng Chou and Wei-Cheng Shen |
|
| 2016- |
期刊論文
|
Theoretical determination of design parameters for an arrayed heat sink with vertical plate fins |
Shiang-Jiun Lin and Yi-Jin Chen |
Heat and Mass Transfer
|
| 2016- |
研討會論文
|
Study for the thermal performance of the shielded linearly-patterned glass loaded by solar radiation |
S.-J. Lin, C.-T. Huang, Y.-R. Yang and C.-H. Hsieh |
|
| 2016- |
研討會論文
|
The study of thermal performance of a double-patterned glass material under solar radiation |
Shiang-Jiun Lin and Ya-Ru Yang |
|
| 2015- |
期刊論文
|
Attenuation of glazing energy using linear patterns on the glass surface |
Shiang-Jiun Lin, Yong-Cheng Chen, Hao-Hu Li and Chien-Ta Huang |
Advances in Mechanical Engineering
|
| 2015- |
期刊論文
|
Hybrid Thermoelastic Stress Analysis |
Lin, S.-J.; Samad, W.A.; Khaja, A.A.; Rowlands, R.E. |
Experimental Mechanics
|
| 2015- |
期刊論文
|
Reducing interior temperature resulting from solar energy using three-dimensional surface patterns |
Shiang-Jiun Lin, Hao-Hu Li, Yong-Cheng Chen and Yung-Chen Chou |
Advances in Mechanical Engineering
|
| 2015- |
期刊論文
|
Reducing solar effect on the glazing material based on using non-linear patterns |
Shiang-Jiun Lin and Hao-Hu Li |
Energy and Buildings
|
| 2015- |
研討會論文
|
Evaluation of Thermal Performance for the Developed Ventilated |
Shiang-Jiun Lin, Yen-Wei Chen, Yi-Jin Chen and Mao-Sheng Wang |
|
| 2015- |
研討會論文
|
Investigation of Residual Stress using Thermoelastic Stress Analysis |
S.-J. Lin |
|
| 2014- |
專書論文
|
Investigations for the thermal influence of glasspatterns on the building envelope |
S.-J. Lin, Y.-C. Chen and P.-T. Sun, |
Progress in Sustainable Energy Technologies, vol. 2
|
| 2014- |
研討會論文
|
Attenuating Glazing Energy using Non-linear 3-D Patterns |
S.-J. Lin, H.-H. Li, Y.-C. Chou |
|
| 2014- |
研討會論文
|
Non-contacting Residual Stress Measurement by Thermoelasticity |
S.-J. Lin, Y.-C. Chou, H.-H. Li |
|
| 2013- |
期刊論文
|
Stress At and In The Neighborhood Of A Near-Edge Hole In A Plate Subjected To An Offset Load From Measured Temperatures |
Lin, S.-J.; Matthys, D.R.; Quinn, S.; Davidson, J.P.; Boyce, B.R.; Khaja, A.A.; Rowlands, R.E. |
European Journal of Mechanics - A/Solids
|
| 2012- |
研討會論文
|
Infrared Stress Analysis of an Unsymmetrically-loaded Perforated Member |
Lin, S.-J.; Matthys, DR; Samad W.A.; Khaja, A.A.; Boyce, B.R.; Rowlands, RE |
|
| 2012- |
研討會論文
|
Investigations for The Thermal Influence Of Glass Patterns On The Building Envelope |
Lin, S.-J.; Chen, Y.-C.; Sun, P.-T. |
|
| 2012- |
研討會論文
|
Numerical Study for Pressing Process in Inverse NIL Fabrication |
S.-J. Lin, A.L. Le, Y.-W. Chen |
|
| 2011- |
期刊論文
|
Non-destructive 3-D Determination of Interior Stresses |
Lin, S.-J.; Quinn, S.; Boyce, B.R.; Rowlands, R.E., “Non-destructive 3-D Determination of Interior Stresses |
Applied Mechanics and Materials
|
| 2011- |
期刊論文
|
Thermoelastic Determination of Individual Stresses in Vicinity of a Near-Edge Hole Beneath a Concentrated Load |
Lin, S.-J.; Quinn, S.; Matthys, D.R.; New, A.M.; Kincaid, I.M.; Boyce, B.R.; Khaja, A.A.; Rowlands, R.E. |
Experimental Mechanics
|
| 2011- |
研討會論文
|
Numerically Optimize NIL Fabrication based on Well and Ill Process Conditions |
Lin, S.-J.; Chang, H.-L. |
|
| 2009- |
期刊論文
|
Separating Stresses Thermoelastically in a Central Circularly Perforated Plate Using an Airy Stress Function |
Lin, SJ; Matthys, DR; Rowlands, RE |
Strain
|
| 2007- |
期刊論文
|
Using Airy Stress Function to Thermoelastically Separate Stress in a Central Circularly Perforated Plate |
S.-J. Lin, D.R. Matthys, R.E. Rowlands |
Applied Mechanics of Materials
|
| 2007- |
專書論文
|
Determining Individual Stresses Around a Near-Edge Hole Subjected to an Offset Load Using Thermoelasticity |
S.-J. Lin, D.R. Matthys, S. Quinn, J.P Davidson, B.R. Boyce, R.E. Rowlands |
Experimental Analysis of Nano and Engineering Materials and Structures
Proceedings of the 13th International Conference on Experimental Mechanics, Alexandroupolis, Greece, July 1–6, 2007
|
| 2007- |
研討會論文
|
Combining thermoelastic and stress function to evaluate individual stresses around a near-edge hole |
S.-J. Lin, S. Quinn, D.R. Matthys, I.M. Kincaid, B.R. Boyce, R.E. Rowlands |
|
| 2007- |
研討會論文
|
Determining Orthotropic Coefficients From, and Thermoelastic Stress Analysis of, Diametrally Loaded Composite Disk |
S. Quinn, S.-J. Lin, J. McCabe, R.E. Rowlands |
|
| 2007- |
其他
|
Determining Individual Stresses around a Near-Edge Hole in a Plate Subjected to an Offset Load using Thermoelasticity |
S.-J. Lin, D.R. Matthys, S. Quinn, J.P. Davidson, B.R. Boyce, R.E. Rowlands |
|
主要學歷