| 出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
| 2022-12 |
期刊論文
|
Online detection of residual stress near the gate using cavity pressure for injection molding |
Hao-Hsuan Tsou*, Chung-Ching Huang, Yi-Cheng Chen, Syu-Yang Shih |
Journal of Polymer Engineering
|
| 2022-11 |
期刊論文
|
Design and validation of sensor installation for online injection molding sidewall deformation monitoring |
Hao-Hsuan Tsou*, Chung-Ching Huang, Ting-Wei Zhao, Zhi-Hao Wang |
Measurement
|
| 2021-08 |
研討會論文
|
射出成形模內感測系統之設計與成品品質線上檢測 |
趙廷偉、鄒濠亘、黃俊欽 |
|
| 2020-12 |
研討會論文
|
The Feature Extraction Modeling of Product Analysis in Injection Molding for Intelligent Manufacturing |
Hao-Hsuan Tsou, Kuang-Di Lee, Zhi-Hao Wang, Chung-Ching Huang |
|
| 2018-10 |
期刊論文
|
Effects of ultrasonic injection molding conditions on the plate processing characteristics of PMMA |
Yi-Jen Yang, Chung-Ching Huang
|
Journal of Polymer Engineering
|
| 2018-05 |
期刊論文
|
Thermal Compensation and Fuzzy Control for Developing a High-Precision Optical Lens Mold |
Chung-Ching Huang, Fu Zhang and Yi-Jen Yang |
Journal of Mechanics Engineering and Automation
|
| 2016-01 |
研討會論文
|
Annealing study of various polyethylene grades for preparing co-extrusion microporous film |
黃俊欽、楊逸仁、黃光源、王正雄、呂銘聰 |
|
| 2015-11 |
研討會論文
|
新型射出膨脹製程之模具開發及應用於厚件產品的射出與發泡成型 |
黃俊欽、俞名彥 |
|
| 2015-05 |
期刊論文
|
Application of ultrasonic-assisted injection molding for improving melt flowing and floating fibers |
Yi-Jen Yang*, Chung-Ching Huang and Jie Tao |
Journal of Polymer Engineering
|
| 2014-09 |
期刊論文
|
Characteristics analysis and mold design for ultrasonic-assisted injection molding |
Yi-Jen Yang, Chung-Ching Huang, Shih-Kai Lin, Jie Tao1 |
Journal of Polymer Engineering
|
| 2013-07 |
期刊論文
|
Fabrication of dual brightness enhancement structures on light guide plates
using UV roll-to-plate imprinting lithography |
Jen-Chih Yang∗, Chung-Ching Huang |
Optik
|
| 2012-12 |
期刊論文
|
The Influence of Level of Interfacial Healing on the Weld-line Strengths of Injection Molded Parts |
Chung-Ching Huang, Yu-Yi Wu, Hui-Tang Chang and Yi-Jen Yang |
J. Polym. Eng
|
| 2012-08 |
研討會論文
|
PP/HDPE/PP鋰電池隔離膜之共押製程開發及特性分析 |
黃俊欽、徐宗模、謝達華 |
|
| 2012-04 |
期刊論文
|
Fabrication of a prism structure on light guide plateswith UV roll-to-plate imprinting process |
JEN-CHIH YANG, CHUNG-CHING HUANG |
Journal of Optoelectronics and Aadvanced Materials
|
| 2012-01 |
期刊論文
|
A nalysis of processing parameters in fabrication of Fresnel lens solar collector |
Chung-Feng Jeffrey Kuo1, Feriyonika-Feriyonika1, Chung-Ching Huang2, Yong Ling Kuo1 |
Energy Conversion and Management
|
| 2012-01 |
期刊論文
|
Using UV Roll-to-Plate Imprint Lithography to fabricate Light Guide Plates with Micro Dots Patterns |
Jen-Chin Yang* and Chung-Ching Huang |
Micro & Nano Letters
|
| 2012-01 |
研討會論文
|
應用模糊控制改善一模多穴射出成形流動平衡之研究 |
洪試閔1、吳文旺2、黃俊欽3 |
|
| 2011-12 |
期刊論文
|
An Effective Approach to Measuring Real-Time Mold Deflection during Injection Molding |
Chung-Ching Huang, Thanh-Cong Truong, Shen-Hong Chen |
J. Polym. Eng.
|
| 2009-09 |
研討會論文
|
模具變形對薄殼產品在尺寸精度和殘留應力的影響 |
黃俊欽*、陳信宏 |
|
| 2009-07 |
研討會論文
|
以時序閥澆口及CAE技術探討縫合線強度之研究 |
吳有鎰、黃俊欽* |
|
| 2008-01 |
研討會論文
|
微米級共擠押發泡膜之製程研究 |
黃俊欽 |
|
| 2007-12 |
研討會論文
|
發光二極體透鏡之射出成形收縮對光學性質之影響 |
黃俊欽 |
|
| 2006-10 |
研討會論文
|
超薄型導光板的光學設計與射出壓縮成形之研究 |
黃俊欽,馮旭彬 |
|
| 2005-08 |
研討會論文
|
導光板(LGP)的微結構設計及精密成形之研究 |
黃俊欽 |
|
| 2005-01 |
研討會論文
|
射出成形條件對鏡片表面品質影響之研究 |
黃俊欽 |
|
| 2005-01 |
研討會論文
|
平面螺旋式押出模頭之設計分析與可視化研究 |
黃俊欽 |
|
| 2004-05 |
期刊論文
|
Morphological, Thermal, Barrier and Mechanical properties of LDPE/EVOH Blends in Extrusion Blown Film |
黃俊欽 |
Journal of Polymer Research
|
| 2004-04 |
期刊論文
|
Predicting the permeability and tensile properties of multilayer films from the properties of the individual component layers |
黃俊欽 |
Polymer Journal
|
| 2004-01 |
其他
|
利用多層化技術提升高分子薄膜的功能 |
黃俊欽 |
|
| 2003-11 |
期刊論文
|
Adhesion, Permeability and Mechanical Properties of Multilayered Blown Films using Maleated Low Density Polyethylene Blends as Adhesion Promoting Layers |
黃俊欽 |
Polymer Journal
|
主要學歷