研究人才詳細資料
主要學歷
| 出版年月 | 著作類別 | 著作名稱 | 作者 | 收錄出處 |
|---|---|---|---|---|
| 2018-12 | 研討會論文 | 錸鎢懸臂探針於施加電壓之疲勞現象分析 | 洪啟銓, 蕭德慶, 陳鼎元, 張浩元及張高華 | |
| 2018-01 | 期刊論文 | Effects of Notch Depth and Direction on Stability of Local Sharp-Notched Circular Tubes Subjected to Cyclic Bending | Kuo-Long Lee， Kao-Hua Chang and Wen-Fung Pan | International Journal of Structural Stability and Dynamics |
| 2017-12 | 研討會論文 | 懸臂式探針疲勞理論與最佳化分析 | 柯佑新，蕭德慶，林柏諭，張浩元及張高華 | |
| 2017-12 | 研討會論文 | 懸臂式探針疲勞實驗與最佳化分析 | 陳鼎元，蕭德慶，鍾東霖，張浩元及張高華 | |
| 2016-12 | 期刊論文 | Failure life estimation of sharp-notched circular tubes with different notch depths under cyclic bending | Kuo-Long Lee, Kao-Hua Chang and Wen-Fung Pan |
不同凹槽深度之圓管於循環彎曲下壽命分析 Structural Engineering and Mechanics |
| 2016-12 | 研討會論文 | 彈簧針幾何形狀與針測次數實驗分析 | 鍾東霖，蕭德慶，張浩元，侯行寬及張高華 | |
| 2016-12 | 研討會論文 | 晶圓針測之彈簧針幾何外形、反力與針測次數之研究 | 林柏諭，蕭德慶，侯行寬，張浩元及張高華 | |
| 2016-10 | 期刊論文 | Forming Analysis and Defect Improvement of T-type Circular Pipe Fastener | Kao-Hua Chang, Ching-Wei Shih and Gow-Yi Tzou |
T型圓管扣件成形分析與缺陷改善 Journal of the Chinese Society of Mechanical Engineers |
| 2016-01 | 期刊論文 | Collapse of elliptical-notched circular tubes under cyclic bending | Kuo-Long Lee, Kao-Hua Chang & Wen-Fung Pan | Journal of the Chinese Institute of Engineers |
| 2015-12 | 研討會論文 | 圓錐形針頭彈簧針針測分析 | 何驊珉，張浩元，蕭德慶，闕崇安及張高華 | |
| 2015-12 | 研討會論文 | 皇冠形針頭彈簧針針測分析 | 侯行寬，蕭德慶，張浩元，曾冠豪及張高華 | |
| 2014-12 | 研討會論文 | 細間距探針幾何形狀分析 | 曾冠豪，蕭德慶，張浩元，曾祥睿及張高華 | |
| 2014-12 | 研討會論文 | 銅柱凸塊力學行為研究 | 闕崇安，張浩元，蕭德慶，賴尉浚及張高華 | |
| 2014-11 | 期刊論文 | The Mechanical Behavior and Buckling Failure of Sharp-Notched 6061-T6 Aluminum Alloy Tubes under Pure Bending Creep and Relaxation | Kuo-Long Lee and Kao-Hua Chang | Journal of the Chinese Institute of Engineers |
| 2014-07 | 期刊論文 | Effects of Forging Stream Line on Tensile Strength Using FEM Simulation | Ching-Wei Shih, Gow-Yi Tzou and Kao-Hua Chang | Hindawi Publishing Corporation Advances in Mechanical Engineering |
| 2013-06 | 期刊論文 | Mean moment effect on sharp-notched circular tubes under cyclic bending | Kao-Hua Chang and Kuo-Long Lee | Journal of Mechanical Science and Technology |
| 2013-03 | 期刊論文 | Machine Coordinate Values Exchange Model Design and Analysis | Ming-Fu Lin and Kao-Hua Chang | Journal of Advanced Mechanical Design, Systems, and Manufacturing |
| 2013-02 | 期刊論文 | Experimental Testing and Finite Element Modeling of Bump Wafer Probing | Hao-Yuan Chang, Kao-Hua Chang and Yi-Shao Lai | Applied Mechanics and Materials |
| 2013-01 | 期刊論文 | 田口方法對薄形細間距球閘陣列封裝之最佳化設計 | 李國龍、張高華、劉后鴻、潘文峰 |
技術學刊 JOURNAL OF TECHNOLOGY |
| 2013-01 | 研討會論文 | Experimental Testing and Finite Element Modeling of Bump Wafer Probing | Hao-Yuan Chang, Kao-Hua Chang, Yi-Shao Lai | |
| 2012-12 | 期刊論文 | Theoretical Simulations of the Response for Circular Tubes under Cyclic Bending | Kuo-Long Lee, Kao-Hua Chang*, Wen-Fung Pan | Journal of Chung Cheng Institute of Technology |
| 2012-12 | 研討會論文 | 含螺旋槽橢圓刃球端銑刀研磨方法分析 | 林銘福、張高華 | |
| 2012-12 | 研討會論文 | 垂直探針之應力分析 | 陳柏翰、張浩元、張高華、謝秉修 | |
| 2012-05 | 研討會論文 | 多軸CNC 工具機運動之數學模式資料庫的建立與分析 | 林銘福、張高華、栗濬傑 | |
| 2012-05 | 研討會論文 | 晶圓針測之垂直式探針理論分析 | 晶圓針測之垂直式探針理論分析 | |
| 2011-11 | 期刊論文 | Endochronic Simulation on the Effect of Curvature-Rate at the Preloading Stage on the Subsequent Creep or Relaxation of Thin-Walled Tubes under Pure Bending | Kao-Hua Chang*, Chao-Yu Hung | Journal of Mechanics |
| 2011-11 | 期刊論文 | Finite Element ANSYS Analysis on the Mechanical Behavior of the Connection of the Carrier Bicycle | Kao-Hua Chang*, Kuo-Long Lee | Journal of technology |
| 2011-11 | 研討會論文 | 針測探針之疲勞壽命分析 | 李昉陸、張高華、林銘福、廖博益 | |
| 2011-09 | 研討會論文 | Variation of Ovalization for Elliptical-Notched Circular Tubes under Cyclic Bending | Kao-Hua Chang, Kuo-Long Lee, Wen-Fung Pan | |
| 2011-05 | 研討會論文 | 晶圓針測時探針之應力應變及疲勞分析 | 廖博益 林世銘 張浩元 張高華 洪兆宇 | |
| 2011-05 | 研討會論文 | 針測過程中銲墊刮痕理論分析及其最佳化研究 | 黃士瑋 張浩元 林銘福 張高華 洪兆宇 | |
| 2010-12 | 期刊論文 | Finite Element ANSYS Analysis on Mechanical Behavior of Elliptical-notched Circular Tubes Subjected to Cyclic Bending | Chao-Yu Hung, Kao-Hua Chang* and Kuo-Long Lee | Journal of Technology |
| 2010-06 | 期刊論文 | Buckling failure of 310 stainless steel tubes with different diameter-to-thickness ratios under cyclic bending | Kao-Hua Chang, Kuo-Long Lee, Wen-Fung Pan* | Steel and Composite Structures |
| 2010- | 研討會論文 | 運用萃思矛盾矩陣於球端銑刀之幾何創新設計 | 林銘福 張高華 | |
| 2009-11 | 研討會論文 | 純彎曲負荷下薄壁圓管前階段的曲度率對接續潛變或鬆弛行為影響之理論研究 | 張高華 洪兆宇 | |
| 2009-03 | 期刊論文 | A Design of Section-Deformation Measurement Apparatus for Circular Tubes under Cyclic Bending | Kao-Hua Chang*, Kuo-Long Lee, Wen-Fung Pan | Journal of technology |
| 2009-03 | 期刊論文 | Buckling Life Estimation of Circular Tubes under Cyclic Bending | Kao-Hua Chang*, Wen-Fung Pan | International Journal of Solids and Structures |
| 2008-11 | 研討會論文 | 三維發熱元件內部暫態熱源之估算 | 林世銘 蕭德慶 張高華 | |
| 2008-11 | 研討會論文 | 橢圓形凹槽圓管在循環彎曲負載下力學行為之ANSYS有限元素分析 | 洪兆宇 張高華 李國龍 | |
| 2007-12 | 研討會論文 | 相異直徑不銹鋼圓管於純彎曲下之實驗分析 | 張高華 李國龍 潘文峰 | |
| 2006-12 | 研討會論文 | 建築物外牆對流熱傳系數之逆運算分析 | 林世銘, 李訓谷, 張高華 | |
| 2006-11 | 研討會論文 | The Mechanical Behavior and Collapse of Thin-Walled Tubes under Moment-Controlled Cyclic Bending | Kao-Hua Chang, Wen-Fung Pan, Te-Ching Hsiao | |
| 2006-06 | 研討會論文 | MEASUREMENT OF SECTION DEFORMATION OF CIRCULAR TUBES UNDER CYCLIC BENDING | Kao-Hua Chang and Wen-Fung Pan | |
| 2006-03 | 期刊論文 | Mean Moment Effect of Thin-Walled Tubes under Cyclic Bending | Kao-Hua Chang, Wen-Fung Pan*, Kuo-Long Lee | Structural Engineering and Mechanics - An International Journal |
| 2006-03 | 期刊論文 | 不同內直徑及外直徑SUS 304不銹鋼管在循環彎曲負載下力學行為及挫曲損壞之實驗分析 | Kao-Hua Chang, Kuo-Long Lee, Wen-Fung Pan* | Journal of technology |
| 2006-03 | 期刊論文 | 新材料及新式樣棒球面罩之研究 | Kao-Hua Chang, Wen-Fung Pan* | 中工高雄會刊 |
| 2005-11 | 研討會論文 | Pure Bending Creep of SUS 304 Stainless Steel Tubes | Kao-Hua Chang, Wen-Fung Pan | |
| 2005-09 | 研討會論文 | The Influence of Diameter-to-Thickness Ratio and Curvature-Rate on the Collapse of Circular Tubes Subjected to Cyclic Bending | Kao- Hua Chang, Wen-Fung Pan | |
| 2005-03 | 期刊論文 | Experimental and Theoretical Investigation of the Response and Collapse of 316L Stainless Steel Tubes Subjected to Cyclic Bending | Kuo-Long Lee*, Ri-Fong Shie, Kao-Hua Chang | JSME International Journal, Series A, Solid Mechanics and Material Engineering |
| 2005-03 | 期刊論文 | Viscoplastic Response and Collapse of 316L Stainless Steel Tubes under Cyclic Bending | Kao-Hua Chang*, Chien-Min Hsu, Shane-Rong Sheu, Wen-Fung Pan | Steel and Composite Structures - An International Journal |
| 2004-03 | 期刊論文 | Endochronic Simulation for Viscoplastic Collapse of Long, Thick-Walled Tubes under External Pressure and Axial Tension | Kuo-Long Lee*, Kao-Hua Chang | Structural Engineering and Mechanics |