出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
2024-03 |
研討會論文
|
Deriving occlusal plane from the bony landmarks of human skulls
|
Pang-Jie Liang, Yung-Chung Chen, Chi-Lun Lin |
|
2024-03 |
研討會論文
|
Ultrasound's Potential in Detecting Vertical Root Fractures |
Si Yen Ng, Chi-Lun Lin |
|
2023-11 |
研討會論文
|
All-on-4®全口速定植牙模型在各種負載條件和骨質量下的適用性分析 |
梁邦頡、張燿麟、陳永崇、林啟倫 |
|
2023-11 |
研討會論文
|
基於有限元素法的機器學習技術實現All-on-4®贋復設計之即時最佳化 |
梁邦頡、王冠鑫、林家葳、陳永崇、林啟倫 |
|
2023-11 |
研討會論文
|
聲學模擬應用於牙根斷裂之檢測 |
伍思縈、林啟倫 |
|
2023-10 |
研討會論文
|
3D列印醫用鈦合金之下顎骨重建骨板之有限元素分析 |
黃雅曼、張燿麟、湯君偉、林宙晴、林啟倫 |
|
2023-10 |
研討會論文
|
應用Wi-Fi感測技術量化巴金森病步態障礙-臨床收案測試與分析 |
何基弘、翁子揚﹑林啟倫 |
|
2023-07 |
研討會論文
|
Detecting the Progression of Gait Impairments in
Parkinson's Disease Using Wi-Fi |
Tzu-Yang Weng and Chi-Lun Lin |
|
2023-07 |
研討會論文
|
Wi-Fi-Based Continuous Detection of Hand Movements for Motor Assessment in Parkinson's Disease |
Chun-Hsiang Chang and Chi-Lun Lin |
|
2023-05 |
期刊論文
|
A Novel Biopsy Needle with Double Concave-Curved Cutting Edges |
Chi-Lun Lin, Yu-Ming Huang, Zheng-Yan Luo, and Yu-Hsien Hsieh |
IRBM
|
2023-05 |
研討會論文
|
Numerical Simulation of Acoustic Waves in a Simulated Human Tooth for Root Fracture Detection |
Si Yen Ng and Chi-Lun Lin |
|
2023-02 |
期刊論文
|
WiFi-Based Detection of Human Subtle Motion for Health Applications |
Hui-Hsin Chen, Chi-Lun Lin, and Chun-Hsiang Chang |
Bioengineering
|
2022-12 |
研討會論文
|
WiFi-Based Human Motion Identification and Quantification for Health Monitoring |
Tzu-Yang Weng, Shih-Yuan Chen, Chun-Hsiang Chang, Chi-Lun Lin |
|
2022-11 |
研討會論文
|
基於有限元素法的人工類神經網路實現 All-on-4®贋復設計之即時最佳化 |
王冠鑫、林家葳、陳永崇、林啟倫 |
|
2022-10 |
研討會論文
|
使用ASME V&V 40 標準對All-on-4® 植牙之生物力學分析的可信度評估 |
張燿麟、林揚民、林啟倫、陳永崇 |
|
2022-07 |
期刊論文
|
Biomechanical Analysis of Mandibular Implant-Assisted Removable Partial Denture with Distal Extension |
Yung-Chung Chen, Chi-Lun Lin, Chen-Han Yu, Hung-Chih Chang, Yang-Ming Lin, and Jia-Wei Lin |
Journal of Medical and Biological Engineering
|
2022-07 |
研討會論文
|
Novel Cutting Edge Geometry for Needle Biopsy with Rotational Cutting |
Zheng-Yan Luo, Yu-Ming Huang, and Chi-Lun Lin |
|
2022-07 |
研討會論文
|
Subtle Motion Detection Using Wi-Fi for Hand Rest Tremor in Parkinson's Disease |
Shih-Yuan Chen, Chi-Lun Lin |
|
2022-06 |
期刊論文
|
Wi-Fi Based Tracking of Human Walking for Home Health Monitoring |
Chi-Lun Lin, Wen-Jia Chang and Guan-Hwa Tu |
IEEE Internet of Things Journal
|
2022-05 |
期刊論文
|
A Multilayered, Lesion-Embedded Ultrasound Breast Phantom with Realistic Visual and Haptic Feedback for Needle Biopsy |
Si Yen Ng and Chi-Lun Lin |
Ultrasound in Medicine & Biology
|
2021-12 |
研討會論文
|
Automated Design Optimization for All-on-4® Treatments in Different Jawbone Conditions |
Yang-Ming Lin, Yung-Chung Chen and Chi-Lun Lin |
|
2021-08 |
期刊論文
|
Low-Cost and Easily Fabricated Ultrasound-Guided Breast Phantom for Breast Biopsy Training |
Si Yen Ng,Yao-Lung Kuo, and Chi-Lun Lin |
MDPI Applied Sciences
|
2021-07 |
研討會論文
|
Digital Shade-Matching Using Back-Propagation Neural Network Model |
Fang-Lei Lin, Chi-Lun Lin and Yung-Chung Chen |
|
2021-07 |
研討會論文
|
Quantify hand tremor of Parkinson's disease based on Channel State Information |
Hui-Hsin Chen and Chi-Lun Lin |
|
2021-05 |
期刊論文
|
Investigating inlay designs of class II cavity with deep margin elevation using finite element method |
Yung-Chung Chen, Chi-Lun Lin and Chun-Hsien Hou |
BMC Oral Health
|
2020-04 |
研討會論文
|
A Realistic Phantom for Ultrasound-Guided Central Venous Cannulation |
Si Yen Ng and Chi-Lun Lin |
|
2020-03 |
期刊論文
|
Simultaneously Reducing Cutting Force and Tissue Damage in Needle Insertion with Rotation |
Chi-Lun Lin and Yu-An Huang |
IEEE Transactions on Biomedical Engineering
|
2020-02 |
期刊論文
|
Design Optimization of Non-Rotational and Rotational Needle Insertion for Minimal Cutting Forces |
Chi-Lun Lin , Yu-Chen Jheng , Si Yen Ng , Chun Jung Yen |
Journal of Medical Devices-Transactions of the ASME
|
2019-07 |
研討會論文
|
Tunability of Acoustic and Mechanical Behaviors in Breast Tissue Mimicking Materials |
Si Yen Ng and Chi-Lun Lin |
|
2019-06 |
研討會論文
|
Optimizing Cavity Shape with Margin Elevation via Numerical Fatigue Analysis |
Liang-Ying Chen, Chi-Lun Lin and Yung-Chung Chen |
|
2019-06 |
研討會論文
|
Optimizing the Interfaces of Porcelain-Fused-To-Zirconia Fixed Partial Dentures |
Cheng-Han Chiang, Chi-Lun Lin and Yung-Chung Chen |
|
2019-04 |
期刊論文
|
Using Simulation to Study Cutting Force in Biopsy Needle Insertion with Bi-Directional Rotation |
Chun-Jung Yen, Yu-An Huang, and Chi-Lun Lin |
Journal of Mechanics in Medicine and Biology
|
2019-04 |
研討會論文
|
Improvement of Environment and Camera Setting on Extraction of Heart Rate using Eulerian Video Magnification |
Bo-Yu Huang and Chi-Lun Lin |
|
2019-03 |
專書
|
創新醫療器材應用與實作-3D列印於醫學工程與醫療器材創新之應用(專章) |
林啟倫、伍思縈 |
教育部
|
2018-12 |
期刊論文
|
Optimizing the insertion positions and angles of implants for all-on-four dental prostheses |
Yung-Chung Chen, Chi-Lun Lin, Yu-Feng Huang |
Journal of Prosthodontics and Implantology
|
2018-11 |
期刊論文
|
A computational approach to investigate optimal cutting speed configurations in rotational needle biopsy cutting soft tissue |
Chi-Lun Lin, Guan-Jhong Lan |
Computer Methods in Biomechanics and Biomedical Engineering
|
2018-11 |
期刊論文
|
Using Simulation to Help Specify Design Parameters for Vacuum Assisted Needle Biopsy Systems |
Xuelian Gu, Fangqiu Hu, Chi-Lun Lin, Arthur Erdman, and Licheng Lu |
Journal of Medical Devices, Transactions of ASME
|
2018-11 |
研討會論文
|
Biomechanical analysis and prosthetic design optimization for restoring carious lesions with deep margin elevation procedures |
Liang-Ying Chen, Chun-Hsien Hou, Chi-Lun Lin and Yung-Chung Chen |
|
2018-11 |
研討會論文
|
Investigating cutting force in biopsy needle cutting with bi-directional rotation |
Chun-Jung Yen, Yu-An Huang and Chi-Lun Lin |
|
2018-11 |
研討會論文
|
Low Cost and Easily Fabricated Ultrasound-Guided Breast Phantom for Breast Biopsy Training |
Si-Yen Ng, Chi-Lun Lin and Yaw-Lung Kuo |
|
2018-11 |
研討會論文
|
固定式局部義齒界面形狀優化 |
江建翰, 林啟倫, 陳永崇 |
|
2018-07 |
期刊論文
|
Shape Optimization of Retainer Design for Maxillary Anterior Resin-Bonded Fixed Partial Dentures |
Yung-Chung Chen, Yuan-Ray Chang, Chi-Lun Lin |
Journal of Prosthodontics and Implantology
|
2018-07 |
研討會論文
|
Biomechanical Analysis and Design Optimization of Prostheses All-on-four Treatments |
Yu-Feng Huang, Yu-Cheng Chen, Yung-Chung Chen, Chi-Lun Lin |
|
2018-07 |
研討會論文
|
Investigating Tissue Damage in Biopsy Needle Cutting with Unidirectional and Bi-Directional Rotation |
Chi-Lun Lin and Yu-An Huang |
|
2018-07 |
研討會論文
|
Optimizing Biopsy Needle Tip Geometry for Minimal Tissue Cutting Force |
Chun-Jung Yen, Chi-Lun Lin and Yu-Chen Jheng |
|
2018-07 |
研討會論文
|
Radial Stress Analysis for Investigating the Effect of Biopsy Needle Geometry on Tissue Damage |
Pin-Jui Huang and Chi-Lun Lin |
|
2018-07 |
研討會論文
|
Shape Optimization of Maxillary Anterior Resin-Bonded Fixed Partial Dentures |
Yuan-Ray Chang, Chi-Lun Lin, Yung-Chung Chen |
|
2018-05 |
期刊論文
|
Optimizing Design With Extensive Simulation Data: A Case Study of Designing a Vacuum-Assisted Biopsy Tool |
Chi-Lun Lin, Dane Coffey, Daniel Keefe, Arthur Erdman |
Journal of Medical Devices, Transactions of ASME
|
2018-04 |
研討會論文
|
Fracture Toughness Characterization and Mixed-Mode Fracture Finite Element Modeling for Accurate Biopsy Needle Cutting Force Prediction |
Ng Si Yen, Guan-Jhong Lan, and Chi-Lun Lin |
|
2018-01 |
其他
|
Material Analysis of Anatomical Items. United States patent US 9,865,096 B2. |
D. Coffey, D.F. Keefe, A.G. Erdman, B.J. Bidne, G.E. Ostenson, D.M. Flynn, K.M. Merdan, and C.L Lin |
|
2017-11 |
研討會論文
|
A Computational Approach to Investigate Optimal Cutting Speed Configurations in Rotational Needle Biopsy Cutting Soft Tissue |
藍貫中、黃品叡、林啟倫 |
|
2017-11 |
研討會論文
|
A Coupled Eulerian Lagrangian Model for Studying the Tissue Damage of Vacuum-Assisted Biopsy Procedure |
黃宇安、林啟倫 |
|
2017-11 |
研討會論文
|
Biomechanical Analysis and Design Optimization of Prostheses for All-on-4 Treatments |
黃煜峰、陳永崇、林啟倫 |
|
2017-11 |
研討會論文
|
The Influence of Arrangements of Anisotropic Materials on The Mechanical Performance – An Application with Fiber-Reinforced Composite |
蕭亦娗、林啟倫、陳永崇 |
|
2017-11 |
研討會論文
|
上顎前牙樹脂黏合牙橋之固位體形狀最佳化 |
張元睿、陳永崇、林啟倫 |
|
2017-11 |
研討會論文
|
有限元素分析模擬針對深蹲時髕骨肌腱與股四頭肌腱傷害評估 |
黃柏喻、徐子評、林啟倫 |
|
2017-11 |
研討會論文
|
結合有限元素分析與反應曲面法於軟組織旋轉切片針之最佳化設計 |
藍貫中、黃宇安、林啟倫 |
|
2017-10 |
期刊論文
|
On the treatment of high frequency issues in numerical simulation for dynamic systems by model order reduction via the proper orthogonal decomposition. |
Rohit Deokar, Masao Shimada. Chi-Lun Lin, and Kumma Tamma |
Computer Methods in Applied Mechanics and Engineering
|
2017-10 |
研討會論文
|
切片針切削人工乳房組織之力學研究 |
藍貫中、黃品叡、林啟倫 |
|
2017-10 |
研討會論文
|
局部義齒結構最佳化 |
江建翰 賴融暘 林啟倫 陳永崇 張志涵 |
|
2017-08 |
研討會論文
|
An Automated Framework for Constructing Numerical Model from Radiographic Images: A Case of Dental Implant |
Yu-Cheng Chen, Yung-Chung Chen, Chi-Lun Lin |
|
2017-08 |
研討會論文
|
Shape Optimization of Maxillary Anterior Resin Bonded Fixed Partial Denture |
Yuan-Ray Chang, Chi-Lun. Lin, Yung-Chung Chen |
|
2017-07 |
研討會論文
|
A Cohesive Zone Based Finite Element Model for Investigating Rotational Cutting in Needle Biopsy |
Guan-Jhong Lan, Chi-Lun Lin |
|
2017-04 |
研討會論文
|
A Computational Approach using Surface-Based Cohesive Behavior to Study Tissue Cutting with Rotation in Vacuum-Assisted Biopsy |
C.L Lin and G.J. Lan |
|
2017-04 |
研討會論文
|
Fabrication and Testing of Breast Tissue-Mimicking Phantom for Needle Biopsy Cutting–A Pilot Study |
C.L Lin and Y.C. Jheng |
|
2017-03 |
研討會論文
|
Parametric Study of an Inlay Restoration With Deep Margin Elevation |
Chun-Hsien Hou, Yung-Chung Chen, Chi-Lun Lin |
|
2016-08 |
期刊論文
|
A Computational Modeling Approach for Studying Tissue–Cutter Interaction in Breast Biopsy Procedure |
Chi-Lun Lin, Daniel Keefe and Arthur Erdman |
Journal of Medical Devices-Transactions of the ASME
|
2016- |
研討會論文
|
大尺度多參數頸部逆錐度植體形狀最佳化之自動化程序 |
侯均憲、陳友政、賴融暘、陳永崇、林啟倫 |
|
2015-10 |
研討會論文
|
電腦建模方法用於乳房切片手術過程中組織與刀具交互作用之研究 |
林啟倫 |
|
2015-05 |
研討會論文
|
Optimizing Design with Extensive FEA Data: A Case Study using Realistic Vacuum-Assisted Biopsy Cutting Simulations |
Chi-Lun Lin, Dane Coffey, Daniel Keefe and Arthur Erdman |
|
2014-06 |
研討會論文
|
A Human-Centered Design Approach for Devices Interacting with Soft Tissue |
Chi-Lun Lin, Dane Coffey, Daniel Keefe and Arthur Erdman |
|
2014-04 |
期刊論文
|
A System for Optimizing Medical Device Development Using Finite Element Analysis Predictions |
Chi-Lun Lin, Ashutosh Srivastava, Dane Coffey, Daniel Keefe, Marc Horner, Mark Swenson, Arthur Erdman |
Journal of Medical Devices-Transactions of the ASME
|
2013-10 |
期刊論文
|
Design By Dragging: An Interface for Creative Forward and Inverse Design with Simulation Ensembles |
Dane Coffey, Chi-Lun Lin, Arthur Erdman, Daniel Keefe |
IEEE Transactions on Visualization and Computer Graphics
|
2012-03 |
期刊論文
|
A Framework for Medical Device Design Using CAD Synchronization and Remote High-Performance FEA Computing |
Chi-Lun Lin, Dane Coffey, Arthur Erdman, Daniel. Keefe |
Journal of Medical Devices-Transactions of the ASME
|
2010-11 |
期刊論文
|
A process for design, verification, validation, and manufacturer of medical devices using immersive VR environments |
Daniel Keefe, Fotis Sotiropoulos, Victoria Interrante, Birali Runesha, Dane Coffey, Molly Staker, Chi-Lun Lin, Yi Sun, Iman Borazani, Nancy Rowe, Arthur Erdman |
Journal of Medical Devices-Transactions of the ASME
|