| 出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
| 2023-09 |
期刊論文
|
The Influence of the Stamping Parameters on the Warpage of Leadframe |
Lin, HS., Hsieh, WH., Hu, I., Zhang, DS. |
Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering
|
| 2023-05 |
研討會論文
|
Three-dimensional load monitoring of threading-plate failure and adjustment in thread rolling of fasteners |
H S Lin, C C Wen and Y H Chen |
|
| 2022- |
期刊論文
|
Development of an On-Line Defect Detection System for EDM Process |
Lyu, Y.-T.; Jan, C.-M.; Ay, H.; Lin, C.-F.; Yang, H.-C.; Chuang, M.-C.; Lin, H.-S.; Hung, T.-P. |
Appl. Sci.
|
| 2022- |
期刊論文
|
Preforming strategies in correcting the spring-back from the U-shape bending |
H S Lin and H W Lin |
Journal of Physics: Conference Series
|
| 2021-04 |
期刊論文
|
Piercing and Surface-Crack Defects in Cold Combined Forward-Backward Extrusion |
Lin, Heng-Sheng; Lee, Chien-Yu; Li, Wen-Shun |
Applied Sciences
|
| 2020-02 |
期刊論文
|
Compensation of contour distortion in stretch-flanging metal sheets |
Heng-Sheng Lin, Jyun-Yi Ke, Lian-Yu Lin, Yi-Wei Hsu, and Ting-En Huang |
Key Engineering Materials
|
| 2019-10 |
研討會論文
|
Three-dimensional load monitoring of threading-plate adjustment and failure in thread rolling of fasteners |
Heng-Sheng Lin, Chih-Chin Wen and Yi-Hung Chen |
|
| 2018-11 |
研討會論文
|
Stacking with V-shape spots in lamination of stamped electrical steel sheets |
Heng-Sheng Lin, Ho-Chung Fu, Hsin-Te Wang, Wun-Huei Wang |
|
| 2018-07 |
期刊論文
|
Evaluation of the sinking processes for high- pressure-gas cylinders |
Heng-Sheng Lin, Chien-Yu Lee, Chia-Jung Lin, and Ho-Chung Fu |
MATEC Web of Conferences
|
| 2017-12 |
期刊論文
|
The Development of Polycaprolactone (PCL) Microcarriers with an Emulsification Module by Ultrasonic Spraying |
Ying-Chieh Lin, Heng-Sheng Lin, Zheng-Han Hong, Zong-Hsin Liu, Cheng-Tang Pan, Shing-Yi Wu |
Microsystem Technologies
|
| 2017-10 |
期刊論文
|
Stacking with cylindrical spots in lamination of stamped electrical steel sheets |
Heng-Sheng Lin, Ho-Chung Fu, Yun-Kui Huang, Li-Hsiang Liu |
Procedia Engineering
|
| 2017-09 |
期刊論文
|
Piercing and surface-crack defects in combination extrusion of fasteners |
Heng-Sheng Lin, Chien-Yu Lee, Wen-Shun Li, and Cheng-Tsung Wu |
MATEC Web of Conferences
|
| 2017-02 |
期刊論文
|
Manufacture of SiO2 Microparticles Using a Mechanically Machined and Assembled Microfluidic Device |
Ying-Chieh Lin, Heng-Sheng Lin, Zheng-Han Hong, Zong-Hsin Liu |
Microsystem Technologies
|
| 2015-12 |
期刊論文
|
Fabrication of microfluidic structures in quartz via micro machining technologies |
Ying-Chieh Lin, Chung-Ching Lee, Heng-Sheng Lin, Zheng-Han Hong, Fu-Chuan Hsu, Tsung-Pin Hung, Yu-Ting Lyu |
Microsystem Technologies
|
| 2015-10 |
期刊論文
|
Effect of bulge formation on strain inhomogeneity in axi-symmetric metal drawing of light reductions |
Heng-Sheng Lin, Yuan-Chuan Hsu, Chia-Chou Ke |
International Journal of Advanced Manufacturing Technology
|
| 2015-08 |
期刊論文
|
A 3-D analysis of the sheared cross-section of electrical steel plates |
Heng-Sheng Lin, Yu-Da Liu, Hsin-Te Wang, Kun-Min Huang, Zhe-An Lin |
MATEC Web of Conferences
|
| 2015- |
期刊論文
|
Effect of Workpiece Thickness and Surface Texturing on the Micro Cupping Tests |
Heng-Sheng Lin, Ying-Chieh Lin, Ming-Ru Lee |
Key Engineering Materials
|
| 2014-10 |
期刊論文
|
Elliptical redrawing from circular and elliptical cups |
Heng-Sheng Lin, Jian-Min He |
Procedia Engineering
|
| 2014- |
期刊論文
|
Micro Rotary Plunge-Swaging of Stainless Pipes |
Heng-Sheng Lin, Chung-Ching Lee, Ying-Chieh Lin, Chia-Hsien Li |
Key Engineering Materials
|
| 2014- |
專書
|
智慧型模具生產技術 |
林恆勝, 滿梓芸 |
社團法人中華民國模具技術發展學會
|
| 2013-10 |
期刊論文
|
The lubricity of oil-in-water emulsion in cold strip rolling process under mixed lubrication |
Sy-Wei Lo, Tzu-Chun Yang, Heng-Sheng Lin |
Tribology International
|
| 2013-09 |
研討會論文
|
An investigation of stamping with high-strength-steel sheets for an automotive aftermarket part |
Heng-Sheng Lin, Chih-Tsung Su, Horng-Yih Liou, Yuan-Xiao Ye, Wei-Zhong Hong, Ya-Hang Zheng |
|
| 2013-02 |
期刊論文
|
Using graphic hardware to accelerate pocketing tool-path generation |
C. Y. Lee, H. S. Lin and H. T. Yau |
Applied Mechanics and Materials
|
| 2012-09 |
期刊論文
|
The Influence of Process Parameters on Ball Spinning for Grooved-Fin Pipes |
Heng-Sheng Lin, Chien-Yu Lee, Shi-Jie Chang |
STEEL RESEARCH INTERNATIONAL
|
| 2012-04 |
期刊論文
|
Evaluation of Strain Inhomogeneity through Strain Components in Axi-symmetric Drawing |
Heng-Sheng Lin, Yuan-Chuan Hsu, Chia-Chou Ke |
Advanced Science Letters
|
| 2011-11 |
期刊論文
|
A Design of Forming Dies for a Manifold of Airbag Inflator |
Heng-Sheng Lin, Sheng-Chi Tsai, Yuan-Chuan Hsu, Ming-Che Hsiao, Chia-Chou Ke, Bean-Yin Lee |
Advanced Materials Research
|
| 2011-09 |
研討會論文
|
Upsetting with Conical Dies for Metal Sputtering Targets |
H.S. Lin, J.J. Chang, Y.C. Hsu, C.C. Ke, G.J. Huang, W.S. Wang |
|
| 2010-09 |
期刊論文
|
Feasibility of Sinking with Rotary Swaging for High Pressure Gas Cylinders |
Heng-Sheng Lin, Chia-Jung Lin, Yuan-Chuan Hsu, Jing-Herng Lee, Bean-Yin Lee, Yu-Chiang Chen |
Steel Research International
|
| 2009-10 |
研討會論文
|
Process Design of Cold Combination Extrusion for a Motor Coupling |
Lin, H-S, Hsu, Y-C, Keh, C-C |
|
| 2008-05 |
期刊論文
|
Inhomogeneous deformation and residual stress in skin-pass axisymmetric drawing |
Heng-Sheng Lin, Yuan-Chuan Hsu, Chia-Chow Keh |
Journal of Materials Processing Technology
|
| 2008- |
期刊論文
|
A Finite Element Analysis for the Initial Blank’s Shape Design of Sheet Metal in Deep Drawing Process |
Yang, T-S, Hsu,Y-C, Lin H-S, Chang, S-Y |
Key Engineering Materials
|
| 2008- |
期刊論文
|
An analysis of the influence of decompression cavity on the cold hobbing processes |
Yuan-Chuan Hsu, Heng-Sheng Lin |
Journal of Achievements in Materials and Manufacturing Engineering
|
| 2007-11 |
期刊論文
|
An investigation of cold extruding hollow flanged parts from sheet metals |
Heng-Sheng Lin, Chih-Wei Tung |
International Journal of Machine Tools and Manufacture
|
| 2007-04 |
期刊論文
|
六角螺栓近淨形頂鍛成形模擬 |
林恆勝, 許源泉, 楊東昇, 楊政峰, 歐聖堂 |
鍛造季刊
|
| 2007-01 |
期刊論文
|
Hole flanging with cold extrusion on sheet metals by FE simulation |
Heng-Sheng Lin,Chien-Yu Lee, Chia-Hung Wu |
International Journal of Machine Tools and Manufacture
|
| 2005-10 |
期刊論文
|
Hole Flanging with Multi-action Extrusion |
Heng-Sheng Lin, Chia-Hung Wu |
Journal of the Chinese Society of Mechanical Engineers
|
| 2005-10 |
期刊論文
|
Reliability of Sn-Ag-Sb lead-free solder joints |
Hwa-Teng Lee, Heng-Sheng Lin, Cheng-Shyan Lee, Po-Wei Chena |
Materials Science and Engineering A
|
| 2005-03 |
期刊論文
|
The relationship between fracture behaviors and thermomechanical effects of alloy AA2024 of T3 and T81 temper designations using the center crack tensile test |
T.Y. Kuo, H.S. Lin, H.T. Lee |
Materials Science and Engineering A
|
| 1998--- |
期刊論文
|
A Mixed Lubrication Model for Cold Strip Rolling Part 1: Theoretical |
Lin, H-S, Marsault, N., and Wilson, W. R. D. |
STLE Tribology Transactions
|
技術移轉