| 出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
| 2020-12 |
其他
|
扣件成形製程與模具輔助設計系統之研發 |
張朝誠, 曾奕祺, 吳君平, 吳國鼎, 張婉琪 |
|
| 2020-11 |
研討會論文
|
擠製成形結合粉末壓製之初步研究 |
張朝誠, 方建翔 |
|
| 2020-10 |
期刊論文
|
Shearing and Shaving Process of Stainless Steel Wire at Micro Scale |
Chao-Cheng Chang, Tzu-Hsiang Hung, Jung-Shu Chang |
Solid State Phenomena
|
| 2020-05 |
研討會論文
|
形狀複雜度對鍛造負荷之影響 |
張朝誠, 吳君平, 曾奕祺, 吳國鼎, 張婉琪 |
|
| 2019-11 |
研討會論文
|
不鏽鋼線材微剪切成形之模擬與實驗 |
張朝誠, 洪子翔, 張榮書 |
|
| 2019-03 |
期刊論文
|
Prediction of Hardness in Drawn Copper Wire by Effective Strain from Finite Element Simulation |
Chao-Cheng Chang, Yen-Ta Hsieh, Chun-Hsuan Kao, Shun-Yu Shao, Chia-Hao Hsu |
Materials Science Forum
|
| 2019-02 |
期刊論文
|
Forming Limit in the Nosing Process of Micro Copper Cups |
Chao-Cheng Chang, Shuo-Kai Pan, Kuan-Te Yu |
Key Engineering Materials
|
| 2018-12 |
研討會論文
|
Forming Limit in the Nosing Process of Micro Copper Cups |
Chao-Cheng Chang, Shuo-Kai Pan, Kuan-Te Yu |
|
| 2018-11 |
研討會論文
|
Effect of compacting force on micro copper parts fabricated by forging process combined with powder pressing |
Chao-Cheng Chang, Yen-Ta Hsieh, Kuan-Te Yu |
|
| 2018-11 |
研討會論文
|
純銅微縮口成形極限之研究 |
張朝誠, 潘碩鎧, 余冠德 |
|
| 2018-10 |
研討會論文
|
Prediction of Hardness in Drawn Copper Wire by Effective Strain from Finite Element Simulation |
Chao-Cheng Chang, Yen-Ta Hsieh, Chun-Hsuan Kao, Shun-Yu Shao, and Chia-Hao Hsu |
|
| 2018-07 |
研討會論文
|
Study on micro nosing process assisted by ultrasonic vibration |
Chao-Cheng Chang, Sin-Siang Huang |
|
| 2018-05 |
研討會論文
|
抽製純銅線材之硬度預測 |
張朝誠, 謝沇達, 邵順裕, 許家豪 |
|
| 2017-12 |
研討會論文
|
純銅抽線成形摩擦係數之預估 |
張朝誠，潘碩鎧，謝沇達，邵順裕，許家豪 |
|
| 2017-11 |
期刊論文
|
Fabrication of micro metal parts by forging process combined with powder pressing |
Chao-Cheng Chang, Yen-Ta Hsieh |
Procedia Engineering
|
| 2017-09 |
研討會論文
|
Effects of particle shape and temperature on compaction of copper powder at micro scale |
Chao-Cheng Chang, Ming-Ru Wu |
|
| 2017-05 |
研討會論文
|
不鏽鋼SUS316線材微斜角剪切特性之研究 |
張朝誠，邱湘諭 |
|
| 2016-12 |
研討會論文
|
微型螺絲鍛品成形之模具應力分析 |
張朝誠，李庭楷 |
|
| 2016-11 |
研討會論文
|
微型黃銅探針管體之預形設計 |
張朝誠，陳勇助，黃信翔 |
|
| 2016-05 |
研討會論文
|
數位影像處理與邊界提取技術之發展與應用 |
張朝誠，王子維 |
|
| 2016-05 |
研討會論文
|
純銅粉末壓實製程之有限元素模擬與實驗 |
張朝誠，吳銘儒，方韋翔 |
|
| 2015-12 |
研討會論文
|
一字溝止付螺絲製程之研究 |
張朝誠，黃榮賢，陳勇助 |
|
| 2015-12 |
研討會論文
|
成形負荷對純銅粉末熱壓之影響 |
張朝誠，方韋翔 |
|
| 2015-12 |
研討會論文
|
純銅線材抽拉成形應變分布之研究 |
張朝誠，王子維，吳旭富 |
|
| 2015-08 |
研討會論文
|
Prediction of grain deformation in drawn copper wire |
Chao-Cheng Chang, Zi-Wei Wang, Chien-Kuo Huang, Hsu-Fu Wu |
|
| 2015-05 |
研討會論文
|
顆粒形狀對純銅粉末微逆向擠製之影響 |
張朝誠，林仕弘，方韋翔 |
|
| 2015-04 |
期刊論文
|
Effect of Grain Size on Micro Deep Drawing of SUS304 Stainless Steel Square Cup |
Chao-Cheng Chang, Han-Sheng Chen |
Key Engineering Materials
|
| 2014-12 |
研討會論文
|
純銅粉末微擠製之初步研究 |
張朝誠，林仕弘，蔣廣騫 |
|
| 2014-11 |
研討會論文
|
Effect of TiN Coating on Punch Wear in Micro Combined Forward and Backward Extrusion |
Chao-Cheng Chang, Zhi-Qiang Huang |
|
| 2014-11 |
研討會論文
|
差溫加熱微鍛造成形之初步研究 |
張朝誠，柯豐富 |
|
| 2014-09 |
期刊論文
|
Effect of Grain Size on Cross Wedge Rolling of Micro Copper Rod |
Chao-Cheng Chang, Yao-Sheng Hsiao |
Key Engineering Materials
|
| 2014-08 |
期刊論文
|
Effect of Punch Shapes on Micro Backward Extrusion of Brass |
Chao-Cheng Chang, Lin-Chi Wu, Jia-Wei Huang |
Key Engineering Materials
|
| 2014-08 |
期刊論文
|
Investigation on the Improvement of Magnetic Properties by Hot Deformation Processes for NdFeB Magnets |
Yen-Ju Chen, Chao-Cheng Chang, Po-Jen Hsiao, Can-Xun Chang |
Key Engineering Materials
|
| 2014-05 |
期刊論文
|
Effect of Punch Surface Topography on Friction in Micro Combined Forward and Backward Extrusion of Brass |
Chao-Cheng Chang, Cheng-Ping Siao |
Advanced Materials Research
|
| 2014-05 |
研討會論文
|
晶粒尺寸對純銅微交叉輥鍛之影響 |
張朝誠，蕭堯升 |
|
| 2014-01 |
期刊論文
|
Effects of Grain Size and Lubricating Conditions on Micro Forward and Backward Hollow Extrusion of Brass |
Chao-Cheng Chang, Cheung-Hwa Hsu, Jian-Cheng Lai |
Applied Mechanics and Materials
|
| 2013-12 |
研討會論文
|
Prediction of particle orientation in simple upsetting process of NdFeB magnets |
Chao-Cheng Chang, Po-Jen Hsiao, Jr-Shiang You, Yen-Ju Chen, and Can-Xun Chang |
|
| 2013-12 |
研討會論文
|
晶粒尺寸對SUS304不鏽鋼微引伸成形之影響 |
張朝誠，葉國良，陳漢生 |
|
| 2013-12 |
研討會論文
|
釹鐵硼磁石熱成形之初步研究 |
張朝誠，蕭柏仁，游智翔，陳彥儒，張燦勳 |
|
| 2013-09 |
研討會論文
|
Effect of Punch Surface Topography on Friction in Micro Combined Forward and Backward Extrusion of Brass |
Chao‐Cheng Chang, Cheng-Ping Siao |
|
| 2013-05 |
研討會論文
|
應用破壞準則於鈦板微成形之初步研究 |
張朝誠，郭以哲 |
|
| 2013-05 |
研討會論文
|
沖頭形狀對黃銅微逆向擠製之影響 |
張朝誠，吳麟麒，李政勳 |
|
| 2012-10 |
期刊論文
|
Effect of Grain Size on Micro Ball Punch Deformation of SUS 304 Stainless Steel |
Chao-Cheng Chang, Li-Yi Lin |
Advanced Materials Research
|
| 2012-09 |
期刊論文
|
Effects of Temperature and Grain Size on Combined Micro Forward and Backward Extrusion of Copper |
Chao-Cheng Chang, Jian-Chen Lin, Cheng-Ping Siao |
Steel Research International(Special Edition: Proceedings of the 14th International Conference on Metal Forming, September 16-19, 2012, Krakow, Poland)
|
| 2012-05 |
研討會論文
|
溫度與晶粒尺寸對純銅前後擠製之影響 |
張朝誠，林劍塵，蕭承平 |
|
| 2012-05 |
研討會論文
|
預形設計對低碳鋼微鍛頭成形之影響 |
張朝誠，林庭毅 |
|
| 2012-05 |
研討會論文
|
預形設計對馬口鐵圓杯內捲邊之影響 |
張朝誠，徐中華，陳韋文 |
|
| 2012-05 |
研討會論文
|
預形設計對馬口鐵平板內捲邊之影響 |
張朝誠，徐中華，吳彥龍 |
|
| 2012-01 |
期刊論文
|
Influence of grain size and temperature on micro upsetting of copper |
Chao-Cheng Chang, Jian-Chen Lin |
Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture
|
| 2011-12 |
研討會論文
|
晶粒尺寸對純銅微雙杯擠製之影響 |
張朝誠，蕭承平 |
|
| 2011-09 |
期刊論文
|
A Study on Warm Micro Backward Extrusion of SUS 304 Stainless Steel |
Chao-Cheng Chang, Dinh-Hiep Nguyen, Hsin-Sheng Hsiao |
Key Engineering Materials
|
| 2011-09 |
期刊論文
|
Effects of Temperature and Grain Size on Micro Backward Extrusion of Copper |
Chao-Cheng Chang, Hsin-Shen Hsiao |
Steel Research International
|
| 2011-09 |
期刊論文
|
Molecular Dynamics Simulation of Aluminium Thin Film Surface Activated Bonding |
Chao-Cheng Chang |
Key Engineering Materials
|
| 2011-02 |
期刊論文
|
Crossed patch arrangements of linear triangular elements for upper bound finite-element analysis of plane strain deformation problems |
Chao-Cheng Chang |
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
|
| 2011-01 |
期刊論文
|
Effects of temperature and grain refinement on micro simple upsetting of copper |
Chao-Cheng Chang, Wu-Lu Kuo |
Key Engineering Materials
|
| 2011-01 |
期刊論文
|
Influences of strain rate on copper nanowire in tension |
Chao-Cheng Chang |
Key Engineering Materials
|
| 2010-11 |
期刊論文
|
Effects of temperature and grain refinement on the closed-die forging of a micro gear |
Chao-Cheng Chang, Wu-Lu Kuo |
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
|
| 2010-09 |
期刊論文
|
Preform Design for Cold Forging of Micro Gear |
Chao-Cheng Chang, Chien-Kuo Huang |
Steel Research International
|
| 2010-04 |
研討會論文
|
Effects of Punch Blade Angle on Fabricating Micro Plastic Tags |
Chao-Cheng Chang, Da-Chen Pang |
|
| 2010-01 |
期刊論文
|
Effects of Grain Size on Micro Backward Extrusion of Copper |
Chao-Cheng Chang, Teng-Chiao Wang |
Advanced Materials Research
|
| 2010-01 |
期刊論文
|
Effects of Surface Roughness on Tribological Characteristics in Micro Double Cup Extrusion of Aluminum |
Chao-Cheng Chang, Chien-Kuo Huang |
Key Engineering Materials
|
| 2009-11 |
研討會論文
|
不同介質對純銅板材微型鼓脹製程之影響 |
張朝誠，林劍塵 |
|
| 2009-09 |
研討會論文
|
Micro Bulging Processes of Copper Sheets Using Viscous Pressure Media |
Chao-Cheng Chang, Jian-Chen Lin |
|
| 2009-08 |
研討會論文
|
溫度與晶粒尺寸對微齒輪鍛造之影響 |
張朝誠，郭武麓 |
|
| 2009-05 |
研討會論文
|
Effects of Strain Rate on Copper Nanowire in Tension |
Chao-Cheng Chang |
|
| 2009-05 |
研討會論文
|
表面粗糙度對微雙溝擠製之影響 |
張朝誠，洪志錡 |
|
| 2008-11 |
研討會論文
|
晶粒尺寸對純銅微沖剪之影響 |
張朝誠*, 謝典霖 |
|
| 2008-11 |
研討會論文
|
表面粗糙度對微雙杯擠製之影響 |
張朝誠*, 黃建國 |
|
| 2008-09 |
研討會論文
|
Effects of Geometric Parameters on Pin Fin Height of Micro Cold Extruded Heat Sinks |
Chao-Cheng Chang*, Phuong-Bac Nguyen |
|
| 2008-09 |
研討會論文
|
Effects of Process Parameters on Filling of Grooves in Micro Metal Imprinting |
Chao-Cheng Chang*, Wu-Lu Kuo |
|
| 2008-08 |
研討會論文
|
碳化鎢電極微放電加工特性之研究 |
張朝誠*, 鄭元傑 |
|
| 2008-08 |
研討會論文
|
等徑轉角擠製純銅於逆向擠製微型圓杯之研究 |
張朝誠*, 王騰鉸 |
|
| 2008-08 |
研討會論文
|
黃銅微引伸成形加工條件對引伸深度之影響 |
張朝誠*, 陳建宏 |
|
| 2007-08 |
研討會論文
|
微齒輪鍛造之預形設計與實驗 |
張朝誠*, 蘇欲翔 |
|
| 2007-08 |
研討會論文
|
微衝剪之成形模擬與剪斷面品質之研究 |
張朝誠*, 林明宏 |
|
| 2007-05 |
研討會論文
|
微齒輪鍛造之數值模擬與實驗 |
張朝誠*, 蘇欲翔 |
|
| 2007-05 |
研討會論文
|
微衝剪破壞之數值模擬與實驗 |
張朝誠*, 林明宏 |
|
| 2006-11 |
研討會論文
|
單發微放電加工特性之研究 |
陳鴻展, 張朝誠* |
|
| 2006-11 |
研討會論文
|
微型衝剪加工條件對剪斷面品質之影響 |
郭士銘, 張朝誠* |
|
| 2006-05 |
研討會論文
|
鋁材微壓印技術之初步研究 |
張朝誠*, 陳鴻展 |
|
| 2005-10 |
期刊論文
|
The Effect of Forming Speed on Micro-Punched Gears |
C. C. Chang*, Y. H. Wu |
Journal of the Chinese Society of Mechanical Engineers
|
| 2004-10 |
研討會論文
|
A Study of the Thin Film Heat Transfer in a Rapid-Heating Nanoimprint Process |
C. C. Chang*, J.Y. Lin, J. H. Wu, Y. L. Ho, C. F. Chen, S. R. Chen, and W. H. Wang |
|
| 2004-03 |
期刊論文
|
Predictions and Measurements of Residual Stresses from Forging and Heat Treatment |
V. Lacarac, C. C. Chang, A. N. Bramley*, M. J. Tierney, Chris McMahon and D. J. Smith |
Journal of Engineering Manufacture
|
| 2003-08 |
期刊論文
|
A Geometric Approach to Modelling Friction in Metal Forming |
P. Becker, H. J. Jeon, C. C. Chang, A. N. Bramley* |
CIRP Annals – Manufacturing Technology
|
| 2003-04 |
期刊論文
|
Determination of the Heat Transfer Coefficient at the Die Interface in Forging |
C. C. Chang and A. N. Bramley* |
Journal of the Japan Society for Technology in Plasticity
|
| 2002-10 |
研討會論文
|
Determination of the Heat Transfer Coefficient at the Die Interface in Forging |
C. C. Chang* and A. N. Bramley |
|
| 2002-08 |
期刊論文
|
Determination of the Heat Transfer Coefficient at the Workpiece-die Contact Interface for the Forging Process |
C. C. Chang* and A. N. Bramley |
Journal of Engineering Manufacture
|
| 2001-04 |
研討會論文
|
The Tetrahedral Element Upper Bound Analysis (TEUBA) for Forging Preform Design |
C. C. Chang* and A. N. Bramley |
|
| 2000-07 |
研討會論文
|
Ceramic Inserts for Forging Tools – Optimizing the Design |
H. H. Kwon, C. C. Chang and A. N. Bramley* |
|
| 2000-05 |
研討會論文
|
Forging Forging Preform Design Using a Reverse Simulation Approach with the Upper Bound Finite Element Procedure |
C. C. Chang* and A. N. Bramley |
|
| 2000-01 |
期刊論文
|
Forging Preform Design Using a Reverse Simulation Approach with the Upper Bound Finite Element Procedure |
C. C. Chang and A. N. Bramley* |
Journal of Mechanical Engineering Science
|
主要學歷