| 出版年月 |
著作類別 |
著作名稱 |
作者 |
收錄出處 |
| 2016-10 |
研討會論文
|
Adaptive Sliding Mode Control of a Lower-limb Exoskeleton
Rehabilitation Robot
|
Kai-An Yu
, Chen-Yun Kuo
, Miao-Ju Hsu
, Chung-Wei Su
, Mu-Der Jeng
, Chung-Hsien Kuo |
|
| 2016-10 |
研討會論文
|
Integration of Visual Feedback System and Motor Current Based Gait Rehabilitation Robot for Motor Recovery |
Quanquan Liu, Bo Zhang, Yi-Hung Liu , Yu-Tsung Hsiao , Mu Der Jeng, Masakatsu G. Fujie
|
|
| 2015- |
期刊論文
|
Enhancement of Selective Siphon Control Method for
Deadlock Prevention in FMSs |
Yen-Liang Pan, Cheng-Fu Yang, and Mu-Der Jeng |
Mathematical Problems in Engineering
Volume 2015 (2015), Article ID 196514, 6 pages
|
| 2014-07 |
研討會論文
|
EEG-based Emotion Recognition based on Kernel Fisher’s Discriminant Analysis and Spectral Powers |
Yi-Hung Liu, Wei-Teng Cheng, Yu-Tsung Hsiao, Chien-Te Wu, Mu-Der Jeng |
|
| 2014-02 |
期刊論文
|
A Support Vector Data Description Committee for Face Detection |
Yi-Hung Liu, Yung Ting, Shian-Shing Shyu, Chang-Kuo Chen, Chung-Lin Lee, and Mu-Der Jeng |
Mathematical Problems in Engineering
|
| 2013-10 |
期刊論文
|
Computationally Improved Optimal Deadlock Prevention Policy for Linear Programming Problems of Flexible Manufacturing System |
Yen-Liang Pan, Yi-Sheng Huang, Yi-Shun Weng, and Mu-Der Jeng |
Journal of Applied Mathematics
|
| 2013-06 |
期刊論文
|
Enhancement of an Efficient Control Policy for FMSs Using the Theory of Regions and Selective Siphon Method |
Yen-Liang Pan, Yi-Sheng Huang, Mu-Der Jeng, and Sheng-Luen Chung |
The International Journal of Advanced Manufacturing Technology
|
| 2013- |
期刊論文
|
Design of a Shop controller for Flexible Manufacturing Systems Using Petri nets |
Yi-Sheng Huang, MuDer Jeng* and Sheng_Luen Chung |
Advanced Science Letters
|
| 2013- |
期刊論文
|
Synchronized Timed Petri nets for Modeling Traffic Lights Signal Control Systems |
[J71] Yi-Sheng Huang; Yi-Shun Weng; Muder Jeng |
Advanced Science Letters
|
| 2013- |
研討會論文
|
One Computationally Improved Deadlock Prevention Policy for Flexible Manufacturing Systems Using Petri Nets |
Yen-Liang Pan, Member, IEEE, Hesuan Hu, Senior Member, IEEE, Mu-Der Jeng, Fellow, IEEE |
|
| 2012-10 |
研討會論文
|
Using Theory of Regions with Selective Siphon Control for Deadlock Prevention Policy in Petri Nets |
Yen-Liang Pan; Yi-Sheng Huanga; Mu-Der Jengb; Sheng-Luen Chungc |
|
| 2011-11 |
期刊論文
|
Applying Regional Level-Set Formulation to Postsawing Four-Element LED Wafer Inspection |
Chun-Hsi Li,Chuan-Yu Chang,MuDer Jeng |
IEEE Transactions on Systems, Man, and Cybernetics – Part C
|
| 2011-11 |
期刊論文
|
Localization of Wireless Local Area Networks based on Gray and CMAC Methods |
PO-LUN CHANG, MU-DER JENG, LIANG-HWA CHEN, FEI-HU HSIEH， |
International Journal of Innovative Computing, Information and Control (IJICIC)
|
| 2011-10 |
研討會論文
|
An Efficient Deadlock Prevention Policy for FMSs |
Yen-Liang Pan,Yi-Sheng Huang,Mu-Der Jeng |
|
| 2011-10 |
研討會論文
|
Fault Measure of Discrete Event Systems |
Yi-Sheng Huang,Ho-Shan Chiang,MuDer Jeng |
|
| 2011-10 |
研討會論文
|
Telematics gateway and power saving method for electric vehicles |
Po-Lun Chang,Yu-Xin Guo,Mu-Der Jeng; |
|
| 2011-08 |
期刊論文
|
Codebook Generation Using Partition and
Agglomerative Clustering |
Chih-Tang CHANG1
, Jim Z.C. LAI2
, Mu-Der JENG1 |
Advances in Electrical and Computer Engineering
|
| 2011-05 |
期刊論文
|
A Fuzzy K-means Clustering Algorithm Using Cluster Center Displacement |
Chih-Tang Chang, Jim Z. C. Lai, M. D. Jeng |
Journal of Information Science and Engineering
|
| 2010-12 |
期刊論文
|
Fast Agglomerative Clustering Using Information of k Nearest Neighbors |
Chih-Tang Chang, Jim Z. C. Lai, M. D. Jeng* |
Pattern Recognition
|
| 2010-11 |
研討會論文
|
Telematics Gateway Framework for Electric Vehicles |
[C101] Po-Lun Chang, Chih-Tang Chang, I-Ta Tsai, Adam Feng, Yang-Ting Jeng and MuDer Jeng |
|
| 2010-10 |
研討會論文
|
Enhancement of an Deadlock Prevention Policy for FMSs Using Theory of Regions |
Yi-Sheng Huang ,Yen-Liang Pan,Mu-Der Jenga,Po-Lun Chang |
|
| 2010-10 |
研討會論文
|
Modeling and Analysis of Traffic Light Controller Using Statechart |
Yi-Sheng Huang,Shuo-Xian Liau,Mu-Der Jeng |
|
| 2010-09 |
期刊論文
|
Grey Relational Analysis Based Approach for CMAC Learning |
Po-Lun Chang, Ying-Kuei Yang, Horng-Lin Shieh, Fei-Hu Hsieh and MuDer Jeng* |
International Journal of Innovative Computing, Information and Control
|
| 2010-06 |
期刊論文
|
Design of a Blood Oxygen Saturation Measurement System and Its Calibration Using Time-Frequency Analysis |
H. K. Wang, Po-Lun Chang, F. H. Hsieh, H. C. Wu, S. H. Chen, and MuDer Jeng* |
Electric Monthly
|
| 2009-12 |
期刊論文
|
Wafer Defect Inspection by Neural Analysis of Region Features |
Chuan-Yu Chang, Chun-Hsi Li, Yung-Chi Chang and MuDer Jeng* |
Journal of Intelligent Manufacturing
|
| 2009-11 |
研討會論文
|
A Novel Consumer Clock Device Based on Grey Relational Analysis |
Po-Lun Chang,Ying-Kuei Yang,Wei-Lieh Hsu,Fei-Hu Hsieh, M.D. Jeng and Yu-Xin Guo |
|
| 2009-11 |
研討會論文
|
An Efficient Liveness Enforcing Supervisor for FMSs Based on Petri nets and The Theory of Regions |
Yi-Sheng Huang,Yen-Liang PAN and M.D. Jeng |
|
| 2009-11 |
研討會論文
|
Automatic Die Inspection for Post-sawing LED Wafers |
Chuan-Yu Chang,Chun-His Li and M.D. Jeng |
|
| 2009-05 |
期刊論文
|
Application of Two Hopfield Neural Networks for Automatic Four-Element LED Inspection |
Chuan-Yu Chang, Chun-Hsi Li, Si-Yan Lin, and MuDer Jeng* |
IEEE Transactions on Systems, Man, and Cybernetics – Part C
|
| 2009-01 |
期刊論文
|
An Unsupervised Neural Network Approach for Automatic Semiconductor Wafer Defect Inspection |
Chuan-Yu Chang, ChunHsi Li, Jia-Wei Chang and MuDer Jeng* |
Expert Systems with Applications
|
| 2008-11 |
研討會論文
|
Diagnosable Discrete Event System Design: A Case Study of Automatic Temperature Control Syste |
Y.L. Wen and M.D. Jeng |
|
| 2008-10 |
期刊論文
|
Learning vector quantization neural networks for LED wafer defect inspection |
Chuan-Yu Chang, Chun-His Li, Chin-Huang Chang and MuDer Jeng* |
International Journal of Innovative Computing, Information and Control
|
| 2008-02 |
期刊論文
|
Integrated Two Hopfield Neural Networks for Automatic LED Defect Inspection |
Chuan-Yu Chang, Chuan-Wang Chang, Si-Yan Lin, and MuDer Jeng* |
Journal of the Chinese Society of Mechanical Engineers
|
| 2008-01 |
期刊論文
|
A Maximally Permissive Deadlock Prevention Policy for FMS Based on Petri Net Siphon Control and the Theory of Regions |
鄭慕德,Z.W. Li, M.C. Zhou |
IEEE Transactions on Automation Science and Engineering
|
| 2007-10 |
研討會論文
|
Diagnosable Discrete Event Systems Design |
[C92] Y.L. Wen, P.S. Fan and M.D. Jeng, |
|
| 2007-07 |
期刊論文
|
Application of Petri Nets and Lagrangian Relaxation to Scheduling Automated Material Handling Vehicles in 300-mm Semiconductor Manufacturing |
D.-Y. Liao, M.D. Jeng and M.C. Zhou |
IEEE Transactions on Systems, Man, and Cybernetics – Part C
|
| 2007-07 |
期刊論文
|
Special Issue on Engineering Applications of Petri Nets |
M.D. Jeng and M.C. Zhou |
IEEE Transactions on Systems, Man, and Cybernetics – Part C
|
| 2007-07 |
期刊論文
|
Special Issue on Engineering Applications of Petri Nets |
鄭慕德, M.C. Zhou |
IEEE Transactions on Systems, Man, and Cybernetics
|
| 2007-07 |
研討會論文
|
Diagnosable Discrete Event Systems Design |
Y.L. Wen, P.S. Fan and M.D. Jeng |
|
| 2007--- |
期刊論文
|
An Agent-Based Early Manufacturability Assessment for Collaborative Design in Coating Process |
Chii-Ruey Lin, Pei-Shu Fan, Yea-Jou Shiau and MuDer Jeng |
Lecture Notes in Computer Science
|
| 2007--- |
期刊論文
|
Intelligent Design of Diagnosable Systems: A Case Study of Semiconductor Manufacturing Machines |
YuanLin Wen, Sheng-Luen Chung, LiDer Jeng and MuDer Jeng |
Lecture Notes in Computer Science
|
| 2006-11 |
期刊論文
|
Siphon-based Deadlock Prevention Policy for Flexible Manufacturing Systems |
鄭慕德 |
IEEE Transactions on Systems, Man, and Cybernetics – Part A
|
| 2006-11 |
研討會論文
|
Petri Nets for Diagnosablity Enhancement of Discrete Event Systems |
Y.L. Wen and M.D. Jeng |
|
| 2006-11 |
研討會論文
|
Petri Nets for Diagnosablity Enhancement of Discrete Event Systems,” |
[C91] Y.L. Wen and M.D. Jeng, |
|
| 2006-11 |
研討會論文
|
“Petri Nets for Diagnosablity Enhancement of Discrete Event Systems,” |
[C91] Y.L. Wen and M.D. Jeng, |
|
| 2006-01 |
期刊論文
|
An Expanded SEMATECH CIM Framework for Heterogeneous Applications Integration |
鄭慕德 |
IEEE Transactions on Systems, Man, and Cybernetics – Part A
|
| 2006-01 |
期刊論文
|
Diagnosability of Semiconductor Manufacturing Equipment |
Y.L. Wen, M.D. Jeng and Y.S. Huang |
Materials Science Forum
|
| 2006-01 |
期刊論文
|
Optimization of Component Placement Scheduling for SMT Assemblies |
C.-H. Kuo, M.D. Jeng, J.J. Wing and T.H. Wang |
Materials Science Forum
|
| 2006--- |
期刊論文
|
An Intelligent Technique Based on Petri Nets for Diagnosablity Enhancement of Discrete Event Systems |
Y.L. Wen, M.D. Jeng, L.D. Jeng and P.S. Fan |
Lecture Notes in Computer Science
|
| 2005-11 |
期刊論文
|
Production Modeling and Simulation of Surface Mount Technology Assembly Industries Using Distributed Agent Orient Petri Net, |
C.-H. Kuo, J.-J. Wing and M.D. Jeng, |
Proceedings of 2005 IEEE International Conference on Networking, Sensing, and Control, Tucson, Arizona, USA, March 19-22
|
| 2005-11 |
研討會論文
|
An Unsupervised Self-Organizing Neural Network for Automatic Semiconductor Wafer Defect Inspection |
[C88] C.-Y. Chang, M.D. Jeng and J.-W. Chang, “,” |
|
| 2005-11 |
研討會論文
|
Diagnosability Analysis Based on T-invariants of Petri Nets, |
[C86] Y.L. Wen and M.D. Jeng, |
|
| 2005-11 |
研討會論文
|
“A Unsupervised Neural Network Approach for Automatic Semiconductor Wafer Defect Inspection,” |
[C85] C.-Y. Chang, M.D. Jeng and J.-W. Chang, |
|
| 2005-10 |
研討會論文
|
Development of Route Oriented Petri Net for Cycle Time Evaluations in SMT Assemblies Industries, |
C.-H. Kuo, J.-J. Wing, E. Lee and M.D. Jeng, |
|
| 2005-10 |
研討會論文
|
“A Polynomial Algorithm for Checking Diagnosability of Petri Nets” |
[C89] Y.L. Wen, C.S. Lee and M.D. Jeng, |
|
| 2005-03 |
期刊論文
|
Discrete Event System Techniques for CIM: Guest Editorial |
M.D. Jeng and X.L. Xie |
International Journal of Computer Integrated Manufacturing
|
| 2005-03 |
期刊論文
|
Management and Control of Information Flow in CIM Systems Using UML and Petri Net |
C.-P. Lin, L.-D. Jeng, Y.-P. Lin and M.D. Jeng |
International Journal of Computer Integrated Manufacturing
|
| 2005-03 |
期刊論文
|
Separation Model Design of Manufacturing Systems Using Distributed Agent-Oriented Petri Net |
C.H. Kuo, H.P. Huang, M.D. Jeng and L.-D. Jeng |
International Journal of Computer Integrated Manufacturing
|
| 2005-01 |
期刊論文
|
Comments on ‘Timed Petri Nets in Modeling and Analysis of Cluster Tools |
鄭慕德 |
IEEE Transactions on Automation Science and Engineerin
|
| 2004-11 |
期刊論文
|
An Introduction to Semiconductor Fab Automation |
M.D. Jeng |
Electric Monthly
|
| 2004-11 |
研討會論文
|
“An Algorithm for Elementary Siphons in PN,” |
[C78] Z. Li, H. Hu and M.D. Jeng, |
|
| 2004-11 |
研討會論文
|
“Design of Intelligent Manufacturing Systems by Using UML and Petri Net,” |
[C79] C.P. Lin, Y.P. Lin and M.D. Jeng, |
|
| 2004-11 |
研討會論文
|
“Diagnosability of Petri Nets,” |
Y. Wen and M.D. Jeng, |
|
| 2004-11 |
研討會論文
|
“Modeling a Discrete Event System Using Statecharts,” |
[C80] Y.S. Huang, M.D. Jeng and C.N. Hsu, |
|
| 2004-11 |
研討會論文
|
“Petri Net Modeling and Lagrangian Relaxation Approach to Vehicle Scheduling in 300mm Semiconductor Manufacturing,” |
[C81] D.-Y, Liao, M.D. Jeng and M.C. Zhou, |
|
| 2004-11 |
研討會論文
|
“The Development of a Laboratory Course Material for Embedded Systems Education,” |
[C84] M.D. Jeng and Y.L. Wen, |
|
| 2004-11 |
研討會論文
|
“Using a Self-Organizing Neural Network for Wafer Defect Inspection,” |
C.-Y. Chang, J.-W. Chang and M.D. Jeng, |
|
| 2004-09 |
期刊論文
|
Normalized In-line Stepper Coordinator Design by the Sequence Diagram and Production Rules |
S.-L. Chung and M.D. Jeng, |
IEEE Robotics and Automation Magazine
|
| 2004-09 |
期刊論文
|
Recent Advances in Semiconductor Factory Automation, Part 2: Equipment-level Automation |
M.D. Jeng, M.C. Zhou and T.W.-Y. Chen |
IEEE Robotics and Automation Magazine
|
| 2004-09 |
期刊論文
|
Scenario Normalization Techniques: In-line Stepper Coordinator Design by the Sequence Diagram and Production Rules |
S.-L. Chung and M.D. Jeng |
IEEE Robotics and Automation Magazine
|
| 2004-09 |
期刊論文
|
Special Issue on Semiconductor Factory Automation, Part 2: Equipment-level Automation |
M.D. Jeng, M.C. Zhou and T.W.-Y. Chen, |
IEEE Robotics and Automation Magazine
|
| 2004-08 |
期刊論文
|
Technology Development of Teleoperated Robotic Manipulator Systems for Underwater Constructions |
C.C. Chang, C.C. Lin, J.H. Wang and M.D. Jeng |
Engineering Science and Technology Bulletin
|
| 2004-06 |
期刊論文
|
Guest Editor’s Words for the Special Issue on Control of Discrete Event System |
M.D. Jeng, D.-Y. Liao and F.-.S. Hsieh |
Asian Journal of Control
|
| 2004-06 |
期刊論文
|
Modeling and Control of Elevators by Statecharts |
Y.S. Huang, S.-L. Chung and M.D. Jeng |
Asian Journal of Control
|
| 2004-03 |
期刊論文
|
Fabulous MESs and C/Cs: An Overview of Semiconductor Fab Automation Systems |
S.-L. Chung and M.D. Jeng |
IEEE Robotics and Automation Magazine
|
| 2004-03 |
期刊論文
|
Special Issue on Semiconductor Factory Automation, Part 1, System-level Automation |
M.D. Jeng, M.C. Zhou and T.W.-Y. Chen |
IEEE Robotics and Automation Magazine
|
| 2004-02 |
期刊論文
|
Semiconductor Factory Automation |
M.D. Jeng |
Electronic Monthly
|
| 2004-01 |
期刊論文
|
ERCN* Merged Nets for Modeling Degraded Behavior and Parallel Processes in Semiconductor Manufacturing Systems |
M.D. Jeng, X.L. Xie and S.-L. Chung |
IEEE Transactions on Systems, Man, and Cybernetics - Part A
|
| 2004-01 |
期刊論文
|
Guest Editorial for the Special Issue on Deadlock Resolution in Computer Integrated Systems |
M.C. Zhou, M.D. Jeng and M.P. Fanti |
IEEE Transactions on Systems, Man, and Cybernetics - Part A
|
| 2004-01 |
專書
|
Implementation of Embedded Microcomputer Systems:ARM and Linux |
M.D. Jeng |
Chuan-Hua Publishing
|
| 2004--- |
期刊論文
|
Adaptive Diagnosis of Discrete Event Systems |
S.-L. Chung, C.-L. Fu and M.D. Jeng |
Journal of the Chinese Institute of Engineers
|
| 2003-11 |
研討會論文
|
“Adaptive Diagnoser for DES Online Diagnosis” |
[C77] S.-L. Chung, C.-L. Fu, and M.D. Jeng, |
|
| 2003-11 |
研討會論文
|
“An Overview of Fab Automation Systems,” |
[C73] S.-L. Chung and M.D. Jeng, |
|
| 2003-11 |
研討會論文
|
“Design and Implementation of a Discrete Event System Using Statecharts,” |
[C74] Y.S. Huang, J.H. Lin, S.-L. Chung and M.D. Jeng, |
|
| 2003-11 |
研討會論文
|
“ERCN* Merged Nets for Modeling Degraded Behavior and Parallel Processes in Semiconductor Manufacturing Systems,” |
[C72] M.D. Jeng, X.L. Xie and S.-L. Chung, |
|
| 2003-11 |
研討會論文
|
“Failure Diagnosis: a Case Study on Modeling and Analysis by Petri Nets,” |
S.-L. Chung, C.-C. Wu and M.D. Jeng, |
|
| 2003-11 |
研討會論文
|
“Modeling a Flexible Manufacturing System Based on Scenario and Petri nets” |
[C76] Y.S. Huang, S.-L. Chung and M.D. Jeng, |
|
| 2003-02 |
期刊論文
|
Manufacturing Execution Systems for Virtual Fab |
S.-L. Chung and M.D. Jeng |
Electronic Monthly
|
| 2003-02 |
期刊論文
|
Semiconductor Automation |
M.D. Jeng |
Electronic Monthly
|
| 2002-12 |
期刊論文
|
Design of Virtual Semiconductor Manufacturing Execution Systems |
S.-L. Chung, M.D. Jeng, S.-.W. Jeng and W.-C. Lee |
the Chinese Institute of Automation Engineers Bulletin
|
| 2002-12 |
期刊論文
|
Process Nets with Resources for Manufacturing Modeling and Their Analysis |
M.D. Jeng, X.L. Xie and M.Y. Peng |
IEEE Transactions on Robotics and Automation
|
| 2002-12 |
期刊論文
|
Process Nets with Resources for Manufacturing Modeling and Their Analysis |
M.D. Jeng, X.L. Xie and M.Y. Peng |
IEEE Transactions on Robotics and Automation
|
| 2002-11 |
研討會論文
|
“An Algorithm of Deadlock Prevention for Flexible Manufacturing Systems” |
[C70] Y.S. Huang and M.D. Jeng, |
|
| 2002-11 |
研討會論文
|
“Extension of UML and Its Conversion to Petri Nets for Semiconductor Manufacturing Modeling,” |
[C67] M.D. Jeng and W.Z. Lu, |
|
| 2002-11 |
研討會論文
|
“Manufacturing Execution System (MES) for Semiconductor Manufacturing” |
[C71] S.-L. Chung and M.D. Jeng, |
|
| 2002-11 |
研討會論文
|
“Normalized In-line Stepper Coordinator Design by the Sequence Diagram and Production Rules: a Case Study,” |
[C68] S.-L. Chung and M.D. Jeng, |
|
| 2002-05 |
研討會論文
|
Analysis of a Siphon-Based Deadlock Prevention Policy for Flexible Manufacturing Systems |
[C69] Y.S. Huang, M.D. Jeng and Y.L. Wen, |
|
| 2001-11 |
研討會論文
|
“A Deadlock Prevention Policy for Flexible Manufacturing Systems Using Siphons,” |
[C63] Y.S. Huang, M.D. Jeng, X.L. Xie and S.-L. Chung, |
|
| 2001-11 |
研討會論文
|
“Modeling and Analysis of Semiconductor Manufacturing Systems with Degraded Behaviors Using Petri Nets and Siphons,” |
[C62] M.D. Jeng and X.L. Xie, |
|
| 2001-11 |
研討會論文
|
“Petri Nets for Semiconductor Holonic Chains Modeling and Analysis,” |
[C65] Z.H. Jiang and M.D. Jeng, |
|
| 2001-11 |
研討會論文
|
“Technology Development and Implementation of an Intelligent Underwater Robotic Manipulator System,” |
[C66] C.C. Lin, C.C. Chang, M.D. Jeng, J.H. Wang and S.H. Tseng, |
|
| 2001-11 |
研討會論文
|
“UML for Object-encapsulated Petri net Modeling and Analysis,” |
[C64] W.Z. Lu and M.D. Jeng, |
|
| 2001-10 |
期刊論文
|
Guest Editorial for the Special Section on Semiconductor Manufacturing Systems: Modeling, Analysis, and Control |
M.D. Jeng and X.L. Xie |
IEEE Transactions on Robotics and Automation
|
| 2001-10 |
期刊論文
|
Modeling and Analysis of Semiconductor Manufacturing Systems with Degraded Behavior Using Petri Nets and Siphons |
M.D. Jeng and X.L. Xie |
IEEE Transactions on Robotics and Automation
|
| 2001-01 |
期刊論文
|
A Deadlock Prevention Policy Based on Petri Nets and Siphons |
Y.S. Huang, M.D. Jeng, X.L. Xie and S.L. Chung |
International Journal of Production Research
|
| 2001-01 |
期刊論文
|
Design, Analysis, and Implementation of a Real-World Manufacturing Cell Controller Based on Petri nets |
Y.S. Huang, M.D. Jeng and S.L. Chung |
International Journal of Computer Integrated Manufacturing
|
| 2001--- |
期刊論文
|
Intelligent Underwater Robotic Manipulator System Technology Study and Implementation |
C.C. Chang, M.D. Jeng, J.H. Wang, C.C. Lin and S.H. Tseng |
Engineering Science and Technology Bulletin
|
| 2000-12 |
期刊論文
|
Synchronization Models for Interactive Multimedia Presentations Using Timed Petri Nets |
M.D. Jeng and Y.L. Wen |
MIS Review
|
| 2000-11 |
研討會論文
|
“ An Iterative Deadlock Prevention Policy Based on Petri Net,” |
[C61] X.L. Xie, Y.S. Hwang, M.D. Jeng, and S.-L. Chung, |
|
| 2000-11 |
研討會論文
|
“ A Deadlock Prevention Policy Based on Siphons,” |
[C60] M.D. Jeng, Y.S. Hwang, and S.-L. Chung, |
|
| 2000-11 |
研討會論文
|
“Manufacturing Modeling Using Process Nets with Resources,” |
[C59] M.D. Jeng, X.L. Xie and M.Y. Peng, |
|
| 2000-10 |
期刊論文
|
Markovian Timed Petri Nets for Performance Analysis of Semiconductor Manufacturing Systems |
M.D. Jeng, X.L. Xie and W.Y. Hung |
IEEE Transactions on Systems, Man, and Cybernetics - Part B
|
| 2000-10 |
期刊論文
|
Modeling and Analysis of Equipment Managers in Manufacturing Execution Systems for Semiconductor Packaging |
F.-T. Cheng, H.-C. Yang, T.-L. Kuo, C. Feng and M.D. Jeng |
IEEE Transactions on Systems, Man, and Cybernetics - Part B
|
| 2000-07 |
期刊論文
|
The Fabrication and Characterization of PZT Thin Film Acoustic Devices for the Application in Underwater Robotic Systems |
C.C. Chang, J.H. Wang, M.D. Jeng, C.C. Lin and K.H. Chen |
Proceedings of National Science Council, part A
|
| 2000-04 |
期刊論文
|
Corrections to 'Synthesis Using Resource Control Nets for Modeling Shared-Resource Systems' |
M.D. Jeng, F. DiCesare and X.L. Xie, |
IEEE Transactions on Robotics and Automation
|
| 1999-12 |
期刊論文
|
Petri Net Dynamics-Based Scheduling of Flexible Manufacturing Systems with Assembly |
M.D. Jeng, C.S. Lin and Y.S. Huang |
Journal of Intelligent Manufacturing
|
| 1999-11 |
期刊論文
|
“Petri Net Based Deadlock Prevention of Manufacturing Systems,” |
[C56] M.D. Jeng, Y.S. Hwang, and P.L. Hung, |
Proceedings of the Eleventh National Symposium on Automation Technology, pp. 1313-1319, Chiayi, Taiwan, July 1999
|
| 1999-11 |
研討會論文
|
“An Efficient Method for Obtaining Performance Bounds of Semiconductor Manufacturing Systems,” |
[C52] M.D. Jeng, X.L. Xie, W.Y. Hung and C.R. Liu, |
|
| 1999-11 |
研討會論文
|
“Design, Analysis, and Implementation of a Manufacturing Cell Controller Based on Petri Nets,” |
[C57] M.D. Jeng, Y.S. Hwang, and S.-L. Chung, |
|
| 1999-11 |
研討會論文
|
“Markovian Petri Nets for Performance Bounds of Semiconductor Manufacturing Systems,” |
[C51] M.D. Jeng, X.L. Xie and W.Y. Hung, |
|
| 1999-11 |
研討會論文
|
“Performance Analysis of Semiconductor Manufacturing Systems Based on Petri Nets and Linear Programming,” |
[C55] M.D. Jeng, X.L. Xie, W.Y. Hung, and C.R. Liu, |
|
| 1999-11 |
研討會論文
|
“Petri Nets for Modeling and Analysis of Manufacturing Systems with Local Operation Cycles,” |
[C53] M.D. Jeng and Y.S. Huang, |
|
| 1999-11 |
研討會論文
|
“Petri Nets in Semiconductor Manufacturing Automation: a Review,” |
[C50] M.D. Jeng and M.C. Zhou, |
|
| 1999-11 |
研討會論文
|
“Petri Nets in Semiconductor Manufacturing Automation: a Review,” |
M.D. Jeng and M.C. Zhou, |
|
| 1999-11 |
研討會論文
|
“Synchronization Models for Pre-orchestrated Interactive Multimedia Presentations Using Timed Petri Nets,” |
[C54] M.D. Jeng, Y.L. Wen and S.L. Chen, |
|
| 1999-11 |
研討會論文
|
“The Study of Distance Measurement Using Ultrasonic Sensors,” |
[C58] C.C. Chang, C.C. Lin, M.D. Jeng, J.H. Wang, S.K. Kau and U.C. Chen, |
|
| 1999-08 |
期刊論文
|
ERCN-merged Nets and Their Analysis Using Siphons |
X.L. Xie and M.D. Jeng |
IEEE Transactions on Robotics and Automation
|
| 1999-07 |
期刊論文
|
Analysis of Modularly Composed Nets by Siphons |
M.D. Jeng and X.L. Xie, |
IEEE Transactions on Systems, Man, and Cybernetics - Part A
|
| 1999-03 |
期刊論文
|
Augmented Reachability Trees for 1-Place-Unbounded Generalized Petri Nets |
M.D. Jeng and M.Y. Peng, |
IEEE Transactions on Systems, Man, and Cybernetics - Part A
|
| 1999-01 |
期刊論文
|
Heuristic Search Based on Petri Net Structures for FMS Scheduling |
M.D. Jeng and S.C. Chen |
IEEE Transactions on Industry Applications
|
| 1999--- |
期刊論文
|
An Algorithm for Calculating Minimal Siphons and Traps of Petri Nets |
M.D. Jeng, M.Y. Peng and Y.S. Huang |
International Journal of Intelligent Control and Systems
|
| 1998-11 |
期刊論文
|
“A Study of Intelligent Underwater Robotic Systems,” |
[C49] J.H. Wang, M.D. Jeng, C.C. Lin, H.Y. Chang and C.C. Chang, |
Proceedings of the 1st Conference on Undersea Technology, pp. 33-40, Taipei, Taiwan, December 1998
|
| 1998-11 |
研討會論文
|
Deadlock Prevention of Manufacturing Systems Using Siphons and Mixed Integer Programming, |
M.D. Jeng and P.L. Hung, |
|
| 1998-11 |
研討會論文
|
Deadlock Prevention of Manufacturing Systems, |
M.D. Jeng and P.L. Hung, |
|
| 1998-11 |
研討會論文
|
Modeling and Analysis of Photolithography Processes and Resources, |
M.D. Jeng, |
|
| 1998-11 |
研討會論文
|
Synthesis of Extended Resource Control Nets Using Siphons, |
M.D. Jeng and X.L. Xie, |
|
| 1998-11 |
研討會論文
|
“Deadlock-Free Scheduling of Flexible Manufacturing Systems Based on Heuristic Search and Petri Net Structures,” |
M.D. Jeng and W.D. Chiou, |
|
| 1998-11 |
研討會論文
|
“Heuristic Search for Scheduling Flexible Manufacturing Systems,” |
M.D. Jeng and W.D. Chiou,
|
|
| 1998-11 |
研討會論文
|
“Modeling and Analysis Using Petri Nets for Semiconductor Fabrication,” |
M.D. Jeng and X.L. Xie, |
|
| 1998-11 |
研討會論文
|
“Modeling and Performance Analysis of Semiconductor Manufacturing Systems,” |
M.D. Jeng and X.L. Xie, |
|
| 1998-11 |
研討會論文
|
“Modeling and Performance Evaluation of the Thin Film Area of an IC Wafer Fabrication System,” |
M.D. Jeng and C.L. Chuang,
|
|
| 1998-11 |
研討會論文
|
“Qualitative Analysis and Deadlock Prevention of a Real-World IC Wafer Fabrication System,” |
M.D. Jeng and X.L. Xie, |
|
| 1998-08 |
期刊論文
|
Introduction to the Special Section on Petri Nets in Semiconductor Manufacturing |
M.D. Jeng and M.C. Zhou |
IEEE Transactions on Semiconductor Manufacturing
|
| 1998-08 |
期刊論文
|
Modeling, Analysis, Simulation, Scheduling, and Control of Semiconductor Manufacturing Systems: A Petri Net Approach |
M.C. Zhou and M.D. Jeng |
IEEE Transactions on Semiconductor Manufacturing
|
| 1998-08 |
期刊論文
|
Modeling, Analysis, Simulation, Scheduling, and Control of Semiconductor Manufacturing Systems: A Petri Net Approach |
M.C. Zhou and M.D. Jeng |
IEEE Transactions on Semiconductor Manufacturing
|
| 1998-08 |
期刊論文
|
Modeling, Qualitative Analysis, and Performance Evaluation of the Etching Area in an IC Wafer Fabrication System Using Petri Nets |
M.D. Jeng, X.L. Xie and S.W. Chou |
IEEE Transactions on Semiconductor Manufacturing
|
| 1998-08 |
期刊論文
|
Modeling, Qualitative Analysis, and Performance Evaluation of the Etching Area in an IC Wafer Fabrication System Using Petri Nets |
M.D. Jeng, X.L. Xie and S.W. Chou |
IEEE Transactions on Semiconductor Manufacturing
|
| 1998-04 |
期刊論文
|
A Heuristic Search Approach Using Approximate Solutions of Petri Net State Equations for Scheduling Flexible Manufacturing Systems |
M.D. Jeng and S.C. Chen |
International Journal of Flexible Manufacturing
|
| 1998--- |
期刊論文
|
Synchronous Neural Networks for Scheduling Job Shops with Batches |
M.D. Jeng and C.Y. Chang |
International Journal of Intelligent Control and Systems
|
| 1997-11 |
研討會論文
|
On the Liveness Problem of 1-Place-Unbounded Petri Nets, |
M.D. Jeng and M.Y. Peng, |
|
| 1997-11 |
研討會論文
|
Scheduling FMS with Due Dates Based on Petri Net State Equations, |
M.D. Jeng, R.W. Jaw and P.L. Hung, |
|
| 1997-11 |
研討會論文
|
Scheduling Flexible Manufacturing Systems Containing Assembly Operations Based on Petri Net Structures and Dynamics, |
M.D. Jeng and C.S. Lin, |
|
| 1997-11 |
研討會論文
|
Synthesis of Resource Control Nets Using Siphons,” |
M.D. Jeng and X.L. Xie,“ |
|
| 1997-11 |
研討會論文
|
“Performance Evaluation of Prioritized Processes with Shared Resources Using Timed Petri Nets,” |
M.D. Jeng, S.W. Chou and C.L. Chung,
|
|
| 1997-11 |
研討會論文
|
“Performance Evaluation of an IC Fabrication System Using Petri Nets,” |
M.D. Jeng, S.W. Chou and C.L. Chung, |
|
| 1997-11 |
研討會論文
|
“Petri Net Liveness Analysis by Minimal Siphons,” |
M.D. Jeng and M.Y. Peng, |
|
| 1997-11 |
研討會論文
|
“Petri Nets for Formulation of Aperiodic Scheduling Problems in FMSs,” |
M.D. Jeng and C.S. Lin, |
|
| 1997-11 |
研討會論文
|
“Scheduling FMS with Due Dates Based on Petri Net State Structural and Dynamic Information,” |
M.D. Jeng, R.W. Jaw and P.L. Hung, |
|
| 1997-11 |
研討會論文
|
“Solving the Reachability Problem of a Class of Petri Nets,” |
M.D. Jeng and M.Y. Peng, |
|
| 1997-11 |
研討會論文
|
“Solving the Reachability Problem of a Class of Petri Nets,” |
[C29] M.D. Jeng and M.Y. Peng, |
|
| 1997-11 |
研討會論文
|
“Structured Analysis and Design of Participator Dependent Multimedia Presentations,” |
T.K. Shih and M.D. Jeng, |
|
| 1997-10 |
期刊論文
|
Petri Nets for Modeling Automated Manufacturing Systems with Error Recovery |
M.D. Jeng |
IEEE Transactions on Robotics and Automation
|
| 1997-04 |
期刊論文
|
A Petri Net Synthesis Theory for Modeling Flexible Manufacturing Systems |
M.D. Jeng |
IEEE Transactions on Systems, Man and Cybernetics – Part B
|
| 1997-02 |
期刊論文
|
Non-Energy Based Neural Networks for Job-Shop Scheduling |
M.D. Jeng and C.Y. Chang |
IEE Electronics Letters
|
| 1996-11 |
期刊論文
|
A Heuristic Scheduling Method for FMSs Using Approximate Solutions of Petri Net State Equations, |
C.S. Lin and M.D. Jeng, |
Proceedings of the Fourth International Conference on Automation Technology, Hsinchu, Taiwan, ROC, pp. 381-387, July 1996
|
| 1996-11 |
研討會論文
|
A Search Approach Based on the Petri Net Theory for FMS Scheduling, |
M.D. Jeng, S.C. Chen and C.S. Lin, |
|
| 1996-11 |
研討會論文
|
Modeling and Analysis of the Photo Area in an IC Manufacturing System, |
M.D. Jeng, C. Feng and S. W. Chou, |
|
| 1996-11 |
研討會論文
|
“Generating Minimal Siphons and Traps for Petri Nets,” |
M.D. Jeng and M.Y. Peng, |
|
| 1995-11 |
期刊論文
|
“On the Reversibility Problem in a Class of Synthesized Petri Nets,” |
M.D. Jeng,
|
Proceedings of IEEE International Conference on Systems, Man, and Cybernetics, Vancouver, Canada, pp. 1855-1860, October 1995 (NSC83-0408-E-019-005, NSC84-2213-E-019-005)
|
| 1995-11 |
研討會論文
|
Experimental Study of a Neural Model for Scheduling Job Shops, |
C.Y. Chang and M.D. Jeng, |
|
| 1995-11 |
研討會論文
|
“A Class of Synthesized Petri Nets for Modeling Automated Manufacturing Systems with Error Recovery,” |
M.D. Jeng, |
|
| 1995-11 |
研討會論文
|
“A Heuristic Approach Based on the State Equations of Petri Nets for FMS Scheduling,” |
S.C. Chen and M.D. Jeng, |
|
| 1995-11 |
研討會論文
|
“A Neural Network Model for the Job-Shop Scheduling Problem with the Consideration of Lot Sizes,” |
C.Y. Chang and M.D. Jeng, |
|
| 1995-11 |
研討會論文
|
“Simulation Results of Non-Energy Based Neural Networks for Scheduling Job Shops,” |
C.Y. Chang and M.D. Jeng, |
|
| 1995-11 |
研討會論文
|
“Simulation Results of an FMS Scheduling Approach Based on AI and Petri Nets,” |
S.C. Chen and M.D. Jeng, |
|
| 1995-11 |
研討會論文
|
“Simulation Studies of Job-Shop Scheduling Using Neural Networks,” |
C.Y. Chang and M.D. Jeng, |
|
| 1995-10 |
研討會論文
|
FMS Scheduling Using Backtracking-Free Heuristic Search Based on Petri Net State Equations |
S.C. Chen and M.D. Jeng, |
|
| 1995-07 |
期刊論文
|
Modular Synthesis of Petri Nets for Modeling Flexible Manufacturing Systems |
M.D. Jeng |
International Journal of Flexible Manufacturing Systems
|
| 1995-06 |
期刊論文
|
Synthesis Using Resource Control Nets for Modeling Shared-Resource Systems |
M.D. Jeng and F. DiCesare |
IEEE Transactions on Robotics and Automation
|
| 1994-11 |
期刊論文
|
“A New Neural Network Model for the Job-Shop Scheduling Problem,” |
C.Y. Chang and M.D. Jeng, |
Proceedings of International Symposium on Artificial Neural Networks, Tainan, Taiwan, R.O.C, pp. 645-650, December 1994
|
| 1994-11 |
期刊論文
|
“Computer Aided Performance Analysis of Petri Net Synthesis Methods for Automated Manufacturing Systems,” |
M.D. Jeng and S.C. Chen, |
Proceedings of the Rensselar's Fourth International Conference on Computer Integrated Manufacturing and Automation Technology, Troy, NY, pp. 81-86, October 1994 (NSC83-0408-E-019-005)
|
| 1994-11 |
期刊論文
|
“Petri Net Design Method for Manufacturing Control,” |
M.D. Jeng, |
Proceedings of ROC Automatic Control Conference, Lung Tan, Taiwan, ROC, pp. 410-415, March 1994 (NSC82-0113-E-019-053-T)
|
| 1994-11 |
研討會論文
|
“Generation and Analysis of Synthesis Rules for Petri Nets with Applications to Manufacturing,” |
M.D. Jeng and C.L. Shieh, |
|
| 1994-11 |
研討會論文
|
“Integration of Scheduling and Control Using Petri Nets for Manufacturing Automation,” |
M.D. Jeng and S.C. Chen, |
|
| 1994-10 |
研討會論文
|
Case Study of a Petri Net Synthesis Technique for Manufacturing Modeling |
M.D. Jeng |
|
| 1993-11 |
研討會論文
|
A Software Tool for Synthesizing Petri Nets in Automated Manufacturing Systems, |
M.D. Jeng and C.L. Shieh, |
|
| 1993-11 |
研討會論文
|
“Performance Characterization of Product Unit Neural Network Associate Memory,” |
J.H. Wang and M.D. Jeng, |
|
| 1993-07 |
研討會論文
|
A Class of Petri Nets for Modeling and Control of Flexible Manufacturing and Assembly Systems with Shared Resources |
M.D. Jeng and F. DiCesare |
|
| 1993-01 |
期刊論文
|
A Review of Synthesis Techniques for Petri Nets with Applications to Automated Manufacturing Systems |
M.D. Jeng and F. DiCesare |
IEEE Transactions on Systems, Man and Cybernetics
|
| 1992-11 |
研討會論文
|
Synthesis Using Extended Resource Control Nets for Modeling Shared-Resource Automated Systems, |
M.D. Jeng and F. DiCesare, |
|
| 1992-11 |
研討會論文
|
“A Modular Petri Net Synthesis Approach for Automated Manufacturing Systems,” |
M.D. Jeng and F. DiCesare, |
|
| 1992-11 |
研討會論文
|
“A Synthesis Method for Petri Net Modeling of Automated Manufacturing Systems with Shared Resources,” |
M.D. Jeng and F. DiCesare, |
|
| 1990-10 |
研討會論文
|
A Review of Synthesis Techniques for Petri Nets, |
M.D. Jeng and F. DiCesare, |
|
| 1985-10 |
研討會論文
|
“A Performance Monitor for Multiprocessor Systems,” |
M.D. Jeng and L.Y. Kung |
|
主要學歷